Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
THE NUROIL PORTFOLIO

Explore every page

Every imported product, grade, guide, article and company page in one searchable directory.

232 pages
Nuroil

Welcome to Nuroil Trading

We are a new global trading house, but we have traditional values that go back to the roots of oil trading. They encompass the very best of what the industry was built upon.

Read more
Guides

Expert Knowledge

Read more
Nuroil

Contact Us

Off. 1007, Mohammad Al Mulla Tower, Al Nhada, Sharjah, United Arab Emirates

Read more
Nuroil

About Us

...it’s what motivates us, and we believe it is what keeps our clients coming back for more.

Read more
Chemicals

Products

We are experienced in different petroleum products that include Bitumen, Baseoil, fuel oil, Sulphur and fertilizers.

Read more
About Us

What we do?

We are what we repeatedly do. Excellence, therefore, is not an act, but a habit

Read more
About Us

Our People

“It's a wonderful feeling when you create a company that aligns with your passion. Every day I wake up excited to spend my day as an entrepreneur responsible for the strategic direction and financial stability of Nuroil. Offering our client with products in a way that disrupts the typical transactional ...

Read more
Bitumen

Penetration Grade

The penetration grading system was developed in the early 1900s to characterize the consistency of semi-solid asphalts. Penetration grading quantifies the following asphalt concrete characteristics:

Read more
Bitumen

Bitumen 40/50

Bitumen 40/50 is a hard, durable bitumen grade used mainly in road construction and industrial applications where high strength and resistance to deformation are required. Primarily used in the construction of highways, roads, and runways, where a durable and long-lasting material is required to withstand heavy traffic loads.

Read more
Bitumen

Bitumen 60/70

Bitumen 60/70 is a type of penetration grade bitumen, which refers to a specific classification of bitumen based on its consistency and suitability for various applications. Bitumen 60/70 is a versatile and widely used material, especially in the construction industry, due to its balance of hardness, flexibility, and adhesive properties.

Read more
Bitumen

Bitumen 85/100

Bitumen 85/100 is a specific grade of penetration bitumen, commonly used in road construction and other paving applications. This grade of bitumen is chosen based on climate conditions and the specific requirements of the construction project.

Read more
Bitumen

Bitumen 100/120

Bitumen 100/120 is another grade of penetration bitumen, similar to Bitumen 85/100 but softer. Bitumen 100/120 is less commonly used compared to other grades but is crucial in specialized applications requiring extra flexibility.

Read more
Bitumen

Bitumen 120/150

Bitumen 120/150 is a softer grade of bitumen, mainly used in road construction and maintenance in colder climates and low-traffic areas. Its flexibility helps prevent pavement cracks and makes it suitable for surface dressing, asphalt production, and industrial applications such as waterproofing and roofing.

Read more
Bitumen

Bitumen 80/100

Bitumen 80/100 is a specific grade of bitumen, which is a black, sticky, and highly viscous material primarily used in road construction and roofing. Its softness makes it suitable for use in regions with cooler climates where the flexibility of the pavement is crucial to prevent cracking.

Read more
Bitumen

Bitumen 30/45

Bitumen 30/45 is a hard, durable bitumen grade used for constructing heavy-duty roads, highways, and industrial pavements. It is particularly suitable for use in hot climates and regions with high traffic loads due to its resistance to deformation and its high softening point. It is also used in asphalt production and surface dressing for road maintenance.

Read more
Bitumen

Bitumen 180/200

Bitumen 180/200 is a very soft grade of penetration bitumen. Bitumen 180/200 is selected for situations where extreme flexibility is required, particularly in very cold environments. Its softness makes it less common for standard road construction, but crucial in specialized applications where other grades would become too brittle.

Read more
Bitumen

Bitumen 200/300

Bitumen 200/300 is an extremely soft grade of penetration bitumen. Bitumen 200/300 is primarily used in specialized applications that demand extreme softness and flexibility, particularly in cold climates and certain industrial processes.

Read more
Bitumen

Bitumen 20/30

Bitumen 20/30 is a hard, durable grade of bitumen used primarily in heavy-duty road construction, such as highways, industrial roads, and airport runways. Its low penetration value and high softening point make it ideal for regions with high traffic loads and hot climates. It is also used in the production of dense asphalt concrete and industrial pavements that require strong resistance to deformation.

Read more
Bitumen

Bitumen 40/60

Bitumen 40/60 is a hard, durable grade of bitumen, mainly used in heavy-duty road construction, such as highways and industrial roads. It is also suitable for hot climates due to its resistance to softening at higher temperatures. Its primary applications include the production of asphalt, surface dressing, and industrial uses like waterproofing and roofing.

Read more
Bitumen

Bitumen 70/100

Bitumen 70/100 is a versatile bitumen grade, commonly used in road construction, maintenance, and various industrial applications. Its balance of flexibility and strength makes it ideal for use in moderate climates, where it provides durable and long-lasting pavements that can handle both traffic loads and environmental changes.

Read more
Bitumen

Bitumen 35/50

Bitumen 35/50 is a hard and durable grade of bitumen, making it well-suited for high-stress applications such as heavy traffic roads, airport runways, and industrial uses. Its high resistance to deformation under load and elevated temperatures makes it an excellent choice for environments where both strength and stability are essential.

Read more
Bitumen

Bitumen 50/70

Bitumen 50/70 is a versatile bitumen grade, commonly used in road construction, maintenance, and various industrial applications. Its balance of hardness and flexibility makes it ideal for use in moderate climates, where it provides durable and long-lasting pavements that can handle both traffic loads and environmental changes.

Read more
Bitumen

Viscosity Grade

Viscosity grading can be done on original (as-supplied) asphalt binder samples (called AC grading) or aged residue samples (called AR grading). The AR viscosity test is based on the viscosity of aged residue from the rolling thin film oven test. With AC grading, the asphalt binder is characterized by the properties it possesses before it undergoes the HMA manufacturing process. The AR grading system is an attempt to simulate asphalt binder properties after it undergoes a typical HMA manufacturing process and thus, it should be more representative of how asphalt binder behaves in HMA pavements. Table 1 lists key advantages and disadvantages of the viscosity grading system.

Read more
Bitumen

Bitumen VG10

Bitumen VG10 (Viscosity Grade 10) is a specific type of bitumen used primarily in road construction and waterproofing applications. This grade is suitable for use in areas with colder temperatures where softer bitumen is required for road construction and maintenance.

Read more
Bitumen

Bitumen 100/150

Bitumen 100/150 is a soft and flexible grade of bitumen, primarily used in road construction, particularly in low-traffic areas and colder climates where its flexibility prevents cracking. It is also utilized in surface dressing and industrial applications where pliability and durability are essential.

Read more
Bitumen

Bitumen 160/220

Bitumen 160/220 is a soft, flexible bitumen grade that is mainly used in cold climate regions, low-traffic road construction, and surface dressing. Its high flexibility and low softening point make it ideal for areas where the bitumen must endure significant temperature changes without cracking. It is also used in asphalt production and industrial applications where flexibility is a priority.

Read more
Bitumen

Bitumen VG20

Bitumen VG20 is best suited for road construction and maintenance in warmer climates or areas with moderate temperatures, where higher viscosity is required for durability and load resistance.

Read more
Bitumen

Bitumen VG40

Bitumen VG40 is a high-viscosity grade bitumen designed for use in extreme conditions where roads or pavements are subjected to heavy traffic loads, intense heat, and heavy-duty applications.

Read more
Bitumen

Bitumen VG30

Bitumen VG30 is a viscosity-graded bitumen primarily used in hotter climates and for roads that experience heavy traffic loads. It has a higher viscosity than VG10 and VG20, making it more suitable for regions with high temperatures and for applications that require more durability and strength.

Read more
Bitumen

Bitumen AC2.5

Bitumen AC2.5 refers to Asphalt Cement with a penetration grade of 2.5, which describes its viscosity and performance characteristics. The "AC" in AC2.5 stands for Asphalt Cement, and the number 2.5 indicates the viscosity measured in Poise (at 60°C), meaning it's a relatively soft grade of asphalt.

Read more
Bitumen

Bitumen AC30

Bitumen AC30 refers to Asphalt Cement with a viscosity grade of 30, The "30" represents its viscosity, measured in Poise at 60°C. Bitumen AC30 is used in road construction and paving applications that require a very stiff and durable binder to withstand extreme traffic loads and environmental conditions.

Read more
Bitumen

Bitumen AC20

Bitumen AC20 refers to Asphalt Cement with a viscosity grade of 20, The "20" refers to its viscosity, measured in Poise at 60°C. This high-viscosity bitumen is designed for heavy-duty road construction and paving applications where extreme strength and resistance to deformation are required.

Read more
Bitumen

Bitumen AC10

Bitumen AC10 refers to Asphalt Cement with a viscosity grade of 10, and is commonly used in road construction and paving, particularly for areas where greater stiffness and strength are required to support higher traffic loads or harsher environmental conditions.

Read more
Bitumen

Bitumen AC5

Bitumen AC5 refers to Asphalt Cement with a viscosity grade of 5, The "5" refers to its viscosity measured in Poise at 60°C. Bitumen AC5 is typically used in road construction and paving applications where slightly higher viscosity is required, but flexibility is still important.

Read more
Bitumen

Bitumen AR4000

Bitumen AR4000 is a specific type of bitumen that has undergone an accelerated aging process to simulate the long-term effects of exposure to the elements. This aging process is typically conducted using a Thin Film Oven Test (TFOT), which heats the bitumen in a thin film to accelerate its aging.

Read more
Bitumen

Bitumen AC40

Bitumen AC40 refers to Asphalt Cement with a viscosity grade of 40, The "40" represents its viscosity, measured in Poise at 60°C. This high-viscosity bitumen is used in applications requiring exceptional strength and durability to handle the most demanding conditions.

Read more
Bitumen

Bitumen AR2000

Bitumen AR2000 is a specific grade of asphalt, a petroleum-derived material commonly used in road construction and maintenance. The "AR" in AR2000 stands for "Asphalt Residue," indicating it's the remaining material after volatile components are removed from crude oil.

Read more
Bitumen

Bitumen AR1000

Bitumen AR1000 is a specific grade of asphalt known for its viscosity properties. Viscosity refers to a material's resistance to flow. In the context of asphalt, viscosity is crucial for its performance in various applications, such as road construction and roofing.

Read more
Bitumen

Bitumen AR8000

Bitumen AR8000 is a specific grade of asphalt, primarily used in road construction. It's characterized by its viscosity, which is a measure of its resistance to flow. The "AR" in AR8000 stands for "Asphalt Residue," indicating that it's a refined petroleum product.

Read more
Bitumen

Bitumen AR16000

Bitumen AR16000 is a specific type of bitumen (asphalt) characterized by its high viscosity and aging properties. The "AR" designation indicates that its viscosity is measured after undergoing a simulated aging process.

Read more
Bitumen

Bitumen Class 50

Bitumen Class 50 or C50, refers to a type of viscosity-graded bitumen used primarily in road construction and maintenance. The "Class 50" designation is based on the viscosity of the bitumen, measured at 60°C.

Read more
Bitumen

Bitumen Class 170

Bitumen Class 170 or C170, is a viscosity-graded bitumen and is considered a general-purpose grade, used for a wide variety of road construction and paving projects.

Read more
Bitumen

Bitumen Class 320

Bitumen Class 320 or C320, is a viscosity-graded bitumen with a viscosity of 320 Poise at 60°C. It is classified as a harder bitumen, providing greater resistance to deformation under heavy traffic and in warm climates. This makes it suitable for demanding applications where high loads and temperature extremes are common.

Read more
Bitumen

Bitumen Class 450

Bitumen Class 450 or C450, is a viscosity-graded bitumen with a viscosity of 450 Poise at 60°C. It is one of the hardest and most viscous bitumen grades available, designed for use in extreme conditions that require the highest resistance to deformation, such as heavy traffic, industrial use, and warm climates.

Read more
Bitumen

Bitumen Class 240

Bitumen Class 240 or C240 is a viscosity-graded bitumen with a viscosity of 240 Poise at 60°C. Bitumen Class 240 is designed for use in environments that require a higher resistance to deformation, especially under heavy traffic and in regions with warmer climates.

Read more
Bitumen

Performance Grade(PG)

Performance Grade (PG) bitumen is bitumen which is graded based on its performance at different temperatures. The Long-Term Pavement Performance(LTPP) has given certain algorithm to calculate the temperature of the pavement based on the temperature of the air above. From this, the highest and the lowest temperatures of the pavement is calculated and the bitumen that performs well in that temperature range is selected.

Read more
Bitumen

Bitumen Multigrade 500

Bitumen Multigrade 500 or M500 is a versatile bitumen grade designed to perform well across a range of temperatures, combining stiffness and flexibility. It is suitable for use in highways, industrial roads, airport infrastructure, and areas with variable climates, where it offers a good balance of durability and performance under different environmental conditions.

Read more
Bitumen

Bitumen Class 600

Bitumen Class 600 or C600 is a viscosity-graded bitumen, with a viscosity of 600 Poise at 60°C. This grade represents one of the hardest and most viscous types of bitumen, making it suitable for extreme conditions that require the highest resistance to deformation and performance under heavy loads and high temperatures.

Read more
Bitumen

Bitumen Multigrade 600

Bitumen Multigrade 600 or M600, is a type of viscosity-graded bitumen designed for demanding applications where a high level of stiffness and temperature stability is required. It has a viscosity of 600 Poise at 60°C, making it one of the harder and more viscous grades.

Read more
Bitumen

PG 64-16 Bitumen

Performance Grade (PG) bitumen PG 64-16 is an asphalt binder formulated to perform under specific temperature conditions. It is categorized within the Superpave Performance Grading (PG) system, which ensures that the binder provides resistance to both high-temperature rutting and low-temperature cracking.

Read more
Bitumen

PG 70-10 Bitumen

Performance Grade (PG) bitumen PG 70-10 is a type of asphalt binder categorized within the Superpave Performance Grading (PG) system. This classification system ensures that bitumen can withstand specific temperature conditions, making it suitable for various pavement applications.

Read more
Bitumen

PG 64-10 Bitumen

Performance Grade (PG) bitumen PG 64-10 is a type of bitumen classified based on its ability to withstand specific temperature ranges. It is part of the Performance Grade (PG) system, which ensures that bitumen can perform well under both hot and cold climates without deformation or cracking.

Read more
Bitumen

PG 64-22 Bitumen

Performance Grade (PG) bitumen PG 64-22 is an asphalt binder designed to perform well under a range of climate conditions, specifically for regions with moderate to warm climates and occasional cold temperatures. It is part of the Superpave Performance Grading (PG) system, which selects bitumen based on the maximum and minimum pavement temperatures it can withstand.

Read more
Bitumen

PG 76-10 Bitumen

Performance Grade (PG) bitumen PG 76-10 is a type of asphalt binder that falls within the Superpave Performance Grading (PG) system. This classification ensures that the bitumen can perform under specified temperature conditions, making it suitable for various demanding pavement applications.

Read more
Bitumen

PG 70-22 Polymer Modified

Performance Grade (PG) bitumen PG 70-22 is a type of asphalt binder classified within the Superpave Performance Grading (PG) system, which ensures that bitumen can perform under specific temperature ranges. The numbers in the grade indicate the highest and lowest pavement temperatures at which the bitumen can provide optimal performance.

Read more
Bitumen

PG 70-16 Bitumen

Performance Grade (PG) bitumen PG 70-16 is a type of asphalt binder classified within the Superpave Performance Grading (PG) system. This system evaluates the performance of bitumen based on its ability to withstand varying temperature conditions, making it suitable for a wide range of pavement applications.

Read more
Bitumen

PG 76-16 Polymer Modified

Performance Grade (PG) bitumen PG 76-16 is a type of asphalt binder used in the Superpave Performance Grading (PG) system, designed to ensure reliable performance in specific climate conditions.

Read more
Bitumen

PMB 64-10

Polymer Modified Bitumen (PMB) 64-10 is a type of asphalt binder that is modified with polymers to enhance its performance properties. The designation “64-10” indicates the temperature range within which this bitumen can effectively perform.

Read more
Bitumen

PG 76-22 Polymer Modified

Performance Grade (PG) bitumen PG 76-22 is a type of asphalt binder designed under the Superpave Performance Grading (PG) system. The numbers in the grade reflect the highest and lowest pavement temperatures at which the binder can effectively perform.

Read more
Bitumen

PMB 70-10

Polymer Modified Bitumen (PMB) 70-10 is a type of asphalt binder that is enhanced with polymers to improve its performance characteristics. The designation “70-10” indicates the temperature range in which this bitumen can effectively perform.

Read more
Bitumen

PMB 82-10

Polymer Modified Bitumen (PMB) 82-10 is a specialized type of asphalt binder that is enhanced with polymers to improve its performance properties, especially in regions with high temperatures and heavy traffic. The designation “82-10” indicates the temperature range within which this bitumen can effectively perform.

Read more
Bitumen

PMB 76-10

Polymer Modified Bitumen (PMB) 76-10 is an asphalt binder that is modified with polymers to enhance its performance under different temperature conditions and heavy loads. The designation “76-10” indicates the temperature range in which this bitumen can effectively perform.

Read more
Bitumen

PMB 76-22

Polymer Modified Bitumen (PMB) 76-22 is a type of asphalt binder modified with polymers to enhance its performance under extreme temperature conditions and heavy traffic loads. The designation “76-22” indicates the temperature range within which this bitumen can effectively perform

Read more
Bitumen

PMB 70

Polymer Modified Bitumen (PMB) 70 is a type of asphalt binder modified with polymers to enhance its performance characteristics, especially in terms of elasticity, durability, and resistance to deformation.

Read more
Bitumen

Cutback Bitumen

Cutback Bituman is made by reducing the viscosity of and ordinary bitumen by adding mostly petroleum type solvent. Cutback Bitumen are used because their viscosity is lower than that of neat asphalt and can thus be used in low temperature applications. After a cutback is applied the solvent evaporates away and only the Bitumen is left. A cutback bitumen is said to cure as the petroleum solvent evaporates. Cutback bitumen are typically used as prime coats and tack coats. Generally are divided into three groups depending on their volatility of the solvent added:

Read more
Bitumen

Cutback Bitumen SC-70

Cutback Bitumen SC-70 (Slow Curing 70) is a type of bitumen that is blended with a petroleum solvent to reduce its viscosity and make it easier to apply at lower temperatures. Slow-curing cutbacks use oils like diesel or low-volatility solvents as the diluent, which evaporate more gradually compared to rapid-curing cutbacks, leaving behind the bitumen to bind with the aggregate.

Read more
Bitumen

Cutback Bitumen SC-250

Cutback Bitumen Slow Curing 250 (SC-250) is a type of bitumen blended with a petroleum solvent to lower its viscosity for easier application at lower temperatures. It is classified as slow curing because the solvent used in the blend evaporates more gradually, giving the bitumen more time to penetrate the surface and bind with the materials it’s applied to.

Read more
Bitumen

PMB 40

Polymer Modified Bitumen (PMB) 40 is a type of bitumen that is modified with polymers to improve its performance properties, specifically in terms of elasticity, strength, and resistance to high temperatures and loads.

Read more
Bitumen

Cutback Bitumen SC-3000

Cutback Bitumen Slow Curing 3000 (SC-3000) is a high-viscosity type of cutback bitumen that has been blended with a slow-evaporating petroleum solvent. This higher viscosity makes SC-3000 suitable for applications requiring thicker layers of bitumen and enhanced performance in heavy-duty scenarios.

Read more
Bitumen

Cutback Bitumen MC-30

Cutback Bitumen MC30 is a type of medium-curing (MC) cutback bitumen where the "30" refers to its viscosity level. It is created by blending bitumen with a medium-volatile solvent like kerosene. This process lowers the viscosity of the bitumen, allowing it to be applied at ambient temperatures without the need for heating. Over time, the solvent evaporates, leaving behind the bitumen to bind the materials.

Read more
Bitumen

Cutback Bitumen MC-70

Cutback Bitumen MC70 is a medium-curing (MC) grade of cutback bitumen, where the "70" refers to its viscosity. In cutback bitumen, bitumen is blended with a solvent (such as kerosene) to reduce its viscosity, making it easier to handle and apply at lower temperatures. Over time, the solvent evaporates, leaving behind the solid bitumen to bind materials.

Read more
Bitumen

Cutback Bitumen SC-800

Cutback Bitumen Slow Curing 800 (SC-800) is a high-viscosity form of cutback bitumen that has been mixed with a slow-evaporating petroleum solvent to lower its viscosity for easier application at lower temperatures. The slow-curing property is due to the use of heavier oils, such as diesel or kerosene, which evaporate slowly, allowing more time for the bitumen to penetrate and bond with the aggregate or surface materials.

Read more
Bitumen

Cutback Bitumen MC-800

Cutback Bitumen MC800 is a type of medium-curing (MC) cutback bitumen where the "800" refers to its viscosity level. It is produced by blending standard bitumen with a medium-volatile solvent, such as kerosene, which reduces its viscosity. This allows the bitumen to be applied at lower temperatures compared to traditional asphalt.

Read more
Bitumen

Cutback Bitumen MC-250

Bitumen MC250 is a type of medium-curing (MC) cutback bitumen where the "250" refers to its viscosity level. In this cutback bitumen, bitumen is diluted with a medium-volatile solvent such as kerosene to lower its viscosity, making it easier to apply at lower temperatures. Once the bitumen is applied, the solvent evaporates, leaving behind the bitumen to perform as a binder.

Read more
Bitumen

Cutback Bitumen RC-70

Cutback Bitumen Rapid Curing 70 (RC-70) is a type of cutback bitumen that is blended with a fast-evaporating petroleum solvent to lower its viscosity, making it easier to apply at lower temperatures. The "70" indicates its viscosity grade, suggesting it has a relatively low viscosity compared to other grades of cutback bitumen.

Read more
Bitumen

Cutback Bitumen MC-3000

Cutback Bitumen MC3000 is a type of medium-curing (MC) cutback bitumen with a high viscosity. The "3000" indicates its viscosity level, meaning it is significantly thicker than lower grades like MC30 or MC250. This cutback bitumen is produced by blending standard bitumen with a medium-volatile solvent such as kerosene or diesel, which lowers its viscosity for easier application at ambient temperatures. Once applied, the solvent gradually evaporates, leaving behind the bitumen to bind the road materials.

Read more
Bitumen

Bitumen Emulsions

Bitumen emulsions are usually dispersions of minute droplets of bitumen in water and are examples of oil-in-water emulsions.

Read more
Bitumen

Cutback Bitumen RC-800

Cutback Bitumen Rapid Curing 800 (RC-800) is a type of cutback bitumen that is blended with a fast-evaporating petroleum solvent, which reduces its viscosity for easier application. Cutback Bitumen RC-800's combination of moderate viscosity and rapid curing capabilities makes it ideal for various road construction and maintenance projects where durability and quick application are essential.

Read more
Bitumen

Cutback Bitumen RC-250

Cutback Bitumen Rapid Curing 250 (RC-250) is a type of cutback bitumen formulated with a faster-evaporating petroleum solvent. RC-250 is designed for applications that require a balance between ease of application and rapid setting.

Read more
Bitumen

Cutback Bitumen RC-3000

Cutback Bitumen Rapid Curing 3000 (RC-3000) is a high-viscosity type of cutback bitumen that has been blended with a fast-evaporating petroleum solvent. This higher viscosity allows for more substantial applications while still providing the benefit of quick curing.

Read more
Bitumen

Bitumen CRS-1

Bitumen emulsion CRS-1 is a type of rapid-setting (RS) cationic bitumen emulsion, primarily used for surface treatments, tack coats, and other road construction applications.

Read more
Bitumen

Bitumen CRS-2

Bitumen emulsion CRS-2 is a cationic rapid-setting bitumen emulsion, similar to CRS-1 but designed with higher viscosity and bitumen content. It is primarily used in road construction and maintenance, particularly for applications requiring a thicker, stronger bonding layer.

Read more
Bitumen

Bitumen CSS-1

Bitumen emulsion CSS-1 is a cationic slow-setting (CSS) emulsion, mainly used for road construction and maintenance, especially in applications requiring a longer setting time for better penetration and mixing with fine aggregates.

Read more
Bitumen

Bitumen CMS-2

Bitumen emulsion CM-2 is a cationic medium-setting (CM) bitumen emulsion primarily used in road construction and maintenance, particularly for applications involving mixing with aggregates.

Read more
Bitumen

Bitumen CSS-1H

Bitumen emulsion CSS-1H is a cationic slow-setting high-viscosity (CSS) emulsion used primarily in road construction and maintenance.

Read more
Bitumen

Bitumen K1-70

Bitumen emulsion K1-70 is a type of cationic bitumen emulsion specifically designed for road construction and maintenance applications. It combines the properties of bitumen with water and emulsifying agents, allowing for easier application and handling.

Read more
Bitumen

Bitumen K1-60

Bitumen emulsion K1-60 is a type of cationic bitumen emulsion specifically designed for various applications in road construction and maintenance. It is essential for enhancing the performance and longevity of road surfaces, making it widely used in both new construction and maintenance activities.

Read more
Bitumen

Bitumen K1-40

Bitumen emulsion K1-40 is a type of cationic bitumen emulsion used primarily in road construction and maintenance applications. It is characterized by its specific properties and is particularly suitable for various paving and sealing tasks.

Read more
Bitumen

Bitumen RS-1

Bitumen emulsion RS-1 is a type of cationic bitumen emulsion designed for specific applications in road construction and maintenance. The designation "RS" typically indicates that it is a rapid-setting emulsion, which means it is formulated to set quickly when applied.

Read more
Bitumen

Bitumen MS-1

Bitumen emulsion MS-1 is a type of cationic bitumen emulsion designed for specific applications in road construction and maintenance. The designation "MS" typically indicates that it is a medium-setting emulsion, which means it has a moderate setting time compared to other emulsions.

Read more
Bitumen

Bitumen K2

Bitumen emulsion K2 is a type of cationic bitumen emulsion used primarily in road construction and maintenance applications. It is essential for enhancing the performance and longevity of road surfaces, making it widely used in both new construction and maintenance activities.

Read more
Bitumen

Bitumen RS-2

Bitumen emulsion RS-2 is a type of cationic bitumen emulsion known for its moderate setting characteristics. The designation "RS" indicates that it is a rapid-setting emulsion, while the "2" typically suggests a specific formulation or viscosity grade.

Read more
Bitumen

Bitumen MS-2

Bitumen emulsion MS-2 is a type of cationic bitumen emulsion characterized by its medium-setting properties. The designation "MS" indicates that it is a medium-setting emulsion, while the "2" typically refers to a specific formulation or viscosity grade.

Read more
Bitumen

Bitumen SS-1

Bitumen Emulsion SS-1 is a slow-setting cationic bitumen emulsion that consists of fine particles of bitumen dispersed in water. It is designed to allow ample time for the emulsion to break and set slowly, making it ideal for applications that require extended working time, such as mixing with aggregate or soil.

Read more
Bitumen

Bitumen RS-60

Emulsion Bitumen RS-60 is a type of cationic bitumen emulsion characterized by its rapid-setting properties. The designation "RS" indicates that it is a rapid-setting emulsion, while "60" typically refers to its viscosity grade or specific formulation.

Read more
Bitumen

Bitumen SS-1h

Bitumen Emulsion SS-1h is a slow-setting, cationic bitumen emulsion similar to SS-1, but with a higher viscosity and hardness. The "h" in SS-1h stands for "hard," indicating that the residual bitumen from the emulsion is harder and more durable once the water evaporates. This makes SS-1h ideal for applications that require stronger, more resistant bonding and a more durable surface.

Read more
Bitumen

Bitumen MS-60

Emulsion Bitumen MS-60 is a type of cationic bitumen emulsion characterized by its medium-setting properties. The designation "MS" indicates that it is a medium-setting emulsion, while "60" typically refers to its viscosity grade or specific formulation.

Read more
Bitumen

Bitumen SS-60

Emulsion Bitumen SS-60 is a type of cationic bitumen emulsion characterized by its slow-setting properties. The designation "SS" indicates that it is a slow-setting emulsion, while "60" typically refers to its viscosity grade or specific formulation.

Read more
Bitumen

Oxidised Bitumen 85/25

Oxidized Bitumen 85/25 (also called Blown Bitumen 85/25) is a specialized grade of bitumen that has undergone a controlled oxidation process. This process modifies the physical properties of the bitumen, making it more rigid and less sensitive to temperature changes compared to penetration-grade bitumen.

Read more
Bitumen

Oxidised Bitumen

Blown bitumen grades or Oxidized Bitumen are produced by passing air through the penetration grades. This process gives the bitumen more rubbery properties than its original formula and they are simply harder bitumen. Hard bitumen under controlled temperature conditions is widely used as an anti-slip layer compound in the piling industry, for manufacture of roofing felts, the roofing and waterproofing industries, for sound dampening felts and under carriage sealant in the automotive industry, electric cable joint protection, joint filling compound, sealant compound and many others. Also used in sealing saw cuts and joints where expected movements are minimum. It is also used in the manufacturing of bituminous marine mastic for the oil & gas pipeline joints.

Read more
Bitumen

Oxidised Bitumen 85/40

Oxidized Bitumen 85/40 is a grade of bitumen produced by blowing air through bitumen under high temperatures. This oxidation process increases its hardness, raises the softening point, and reduces penetration, making it suitable for applications that require stability in extreme weather conditions.

Read more
Bitumen

Oxidised Bitumen 95/25

Oxidized Bitumen 95/25 (or Blown Bitumen 95/25) is a hard, thermally stable grade of bitumen produced by passing air through bitumen at high temperatures. This oxidation process modifies its properties, giving it a higher softening point and lower penetration value, making it resistant to extreme weather and chemical exposure.

Read more
Bitumen

Oxidised Bitumen 115/15

Oxidized Bitumen 115/15 (also known as Blown Bitumen 115/15) is a specialized grade of bitumen created through the oxidation process, where air is blown through bitumen at high temperatures. This results in a material with unique properties, characterized by a high softening point and low penetration value.

Read more
Bitumen

Oxidised Bitumen 95/40

Oxidized Bitumen 95/40 (also known as Blown Bitumen 95/40) is a specialized grade of bitumen produced by blowing air through bitumen at high temperatures, resulting in a material with enhanced properties.

Read more
Bitumen

Natural Bitumen (Gilsonite)

Gilsonite is a natural, resinous hydrocarbon found in the Uintah Basin in northeastern Utah; thus, it is also called Uintahite. This natural asphalt is similar to a hard petroleum asphalt and is often called a natural asphalt, asphaltite, uintaite, or asphaltum. Gilsonite is soluble in aromatic and aliphatic solvents, as well as petroleum asphalt. Due to its unique compatibility, Gilsonite is frequently used to harden softer petroleum products. Gilsonite in mass is a shiny, black substance similar in appearance to the mineral obsidian. It is brittle and can be easily crushed into a dark brown powder. When added to asphalt cement or hot mix asphalt in production, Gilsonite helps produce paving mixes of dramatically increased stability.

Read more
Petroleum

Base Oil

Base Oil is the name given to lubrication grade oils initially produced from refining crude oil (mineral base oil) or through chemical synthesis (synthetic base oil). Base oil is typically defined as oil with a boiling point range between 550 and 1050 F, consisting of hydrocarbons with 18 to 40 carbon atoms. This oil can be either paraffinic or napthenic in nature depending on the chemical structure of the molecules.

Read more
Petroleum

Bunker & Marine Fuel

The term “Bunkers” refers to either the fuel oil used by ocean going ships or the tanks they are stored in. It is derived from an historic reference to coal bunkers used in the days of steam and sail. The great majority of the bunker fuels used by the world’s merchant fleet are residual fuel oil. This is also true for the vast majority of large diesel engines operated on land. By definition, residual fuel oils are the products remaining from the refinery processes after all the distillate or lighter fractions have been removed.

Read more
Petroleum

Fuel Oil

Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners.

Read more
Fertilizers

Fertilizers

The fertilizers outlined here are compound fertilizers composed of primary fertilizers and secondary nutrients. These represent only one type of fertilizer, and other single nutrient types are also made. The raw materials, in solid form, can be supplied to fertilizer manufacturers in bulk quantities of thousands of tons, drum quantities, or in metal drums and bag containers.

Read more
Petroleum

Blended Furnace Oil

Furnace Oil is one of the cheapest fuels available for industrial use. It is a by-product of petroleum refineries. While processing the CRUD Oil, FO ( Furnace Oil ) is one of the products along with other petroleum fuels like HSD, Petrol etc.

Read more
Fertilizers

Ammonium Nitrate

Ammonium nitrate is a chemical compound with the formula NH4NO3. It is composed of nitric acid and salt of ammonia. In room temperature, ammonium nitrate appears in a white crystalline form and it is also colorless. Its melting point is at 169.6 degrees Celsius or 337.3 degrees Fahrenheit.

Read more
Fertilizers

Diammonium Phosphate (DAP)

DAP is the most widely used phosphate fertilizer among growers today. It is manufactured by reacting phosphoric acid and ammonia and contains two ammonia molecules. In alkaline soil conditions, one of the ammonia molecules in DAP will revert to ammonia, making it an excellent fit for low pH or alkaline soil. DAP itself is alkaline with a high pH, exceeding 7.5.

Read more
Product Info

What is Sulphur?

Sulphur Lump is excessively required for a variety of applications in numerous industries such as Chemical industry. We are actively engaged in offering the finest quality Sulphur Lump to our clients. As we believe in offering the best, we leave no stone unturned to acquire Sulphur Lump from the most reliable vendors only.

Read more
Chemicals

Soda Ash Dense

Soda Ash Dense, also known as sodium carbonate dense, is a water-soluble, hygroscopic, alkaline salt and is in a dense form of soda ash, with the density of Min. 900kg/m³.

Read more
Chemicals

Soda Ash

Sodium carbonate (also known as washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid. It most commonly occurs as a crystalline decahydrate, which readily effloresces to form a white powder, the monohydrate. Pure sodium carbonate is a white, odorless powder that is hygroscopic (absorbs moisture from the air). It has a strongly alkaline taste, and forms a moderately basic solution in water. Sodium carbonate is well known domestically for its everyday use as a water softener. When companies process and produce soda ash, a number of other sodium compounds are made as co-products, including sodium bicarbonate (also known as baking soda), sodium sulfite, sodium tripolyphosphate, and chemical caustic soda. Soda ash has a number of diversified uses that touch our lives every day. Glass manufacturing is the largest application for soda ash whether it is in the production of containers, fiberglass insulation, or flat glass for the housing, commercial building, and automotive industries.

Read more
Chemicals

Caustic Soda

Caustic Soda also known as lye and sodium hydroxide is an inorganic compound with the formula NaOH. It is highly soluble in water, and readily absorbs moisture and carbon dioxide from the air. Caustic Soda is used mainly in cleaning products for both industrial and household uses. Also can be used to adjust pH in various manufacturing processes. Sodium hydroxide is used in many industries: in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents, and as a drain cleaner. Sodium Hydroxide is available in solid form (flakes, prills, briquettes) as well as liquid form in various concentrations.

Read more
Chemicals

Soda Ash Light

Soda Ash Light, also known as sodium carbonate light, is a less dense form of soda ash, with the density of 550-720kg/m³. It is a white, odorless powder that is highly soluble in water and has a relatively high pH value, making it an alkaline compound and a useful neutralizing agent in various industrial processes.

Read more
Chemicals

Caustic Soda Pearls

Caustic soda pearls is a white solid, easily soluble in water. Caustic soda pearl is widely used in paper making, printing and dyeing, sewage treatment, electroplating, chemical drilling and so on.

Read more
Chemicals

Caustic Soda Flakes

Caustic soda is used in the manufacture of chemicals, paper, soaps and detergents, rayon and cellophane, the processing of bauxite to alumina, and in the mercerization of textiles, water treatment, etc.

Read more
Construction

Waterproofing Membrane

Bitumen Membranes are plastomeric waterproofing membranes, manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene or SBS) blended together to obtain excellent heat and UV resistance and waterproofing properties. A waterproofing membrane is a thin layer of water-tight material that is laid over a surface. This layer is continuous and does not allow water to pass through it. For example, on a flat terrace, a waterproofing membrane could be laid above the structural slab and below the finish tiles. This will ensure that water does not seep into the structural slab. The tiles and membrane must be laid over a filler material that is sloped to ensure that water flows into sumps and drains. Any water that remains as puddles over the tiles is likely to seep into the slab over time, so puddles are to be avoided at all costs.

Read more
Construction

Cold Asphalt

Nurphalt, is a cold asphalt and is a guaranteed pothole patching material. It is a special blend of asphaltic polymer adhesives and carefully graded aggregates. It is not just a pothole patch but is guaranteed pothole repair. It will remain in the repaired areas in the same condition as when the initial repair was done. It will not rut, ravel or shove in the repaired area. Requires no mixing or heating. It can be used to permanently patch when the surface temperatures are as low as -40° or as high as 168° Fahrenheit. It can be used to permanently patch when the surface temperatures are as low as -40° or as high as 168° Fahrenheit. It can apply with any equipment and skilled person. It will not shrink after it cures. It is a rapid cure patching material offered by other manufacturer. It has a shelf life of one year from the date of purchase. It is for asphalt or concrete pavement repair regardless of the weather condition.

Read more
Construction

APP Modified Membrane

Bituroll-P, APP Modified Bitumen membrane is a plastomeric waterproofing membrane, manufactured from a rich mixture of bitumen and selected polymers(Atatic Poly Propylene) blended together to obtain excellent heat and UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of non woven spun bond polyester rot-proof fabric.

Read more
Construction

Construction Products

Read more
Construction

Fibre Glass Reinforced Membrane

Bituroll is a polymer modified bituminous waterproofing membrane, manufactured from a mixture of bitumen and selected polymers, which are blended together to obtain good waterproofing properties. The bitumen compound also exhibits high heat and UV resistance properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of non wovwn glass fibre carrier.

Read more
Construction

Protective Coating

Bituminous Protective Coatings are used to form a flexible and vapour proof protective coating, depending on the formulation and grade of polymerisation. With the grade of Polymer or Fibre Reinforcement used the grade of flexibility, behaviour against water and vapour transmission, etc. can be influenced. Typical application areas are under screed wet-are waterproofing, protective coating on concrete foundations, etc.

Read more
Construction

Elastomeric Bitumen Coating

NURPROOF (Elastomeric SBS Modified Bitumen Coating) is an One-component SBS modified bituminous liquid waterproofing membrane, ready to use, highly elastic, to waterproof foundations and floors and for the restoration of bituminous and slated membranes.

Read more
Construction

SBS Modified Membrane

Bituroll-S, SBS Modified Bitumen Membrane are plastomeric waterproofing membranes designed to provide sub-structure concrete surfaces with perfect waterproofing protection. The elastomeric compound is carefully produced under controlled conditions to ensure its thermal stability at atmospheric temperatures and flexibility at very low temperatures. Bituroll membranes are impermeable to water, very flexible and easy to work around contours and protrusions

Read more
Construction

Bitumen Primers

Bitumen primer is applied to any surface that bitumen needs to adhere to. The primer provides a key, and seals any porous surfaces that the bitumen products need to adhere to and can be applied to most of surfaces including concrete, brick work, metal materials and existing bitumen surfaces.

Read more
Construction

Water Based Primers

NURPRIME WB is a pure bitumen emulsion supplied as a viscous liquid for water proofing to substructure and super structure areas in buildings and civil engineering projects. The coating is dark brown in colour and dries to black flexible protective film.

Read more
Construction

Solvent Based Primers

Nurprime SB is solvent based black bitumen paint. When dry the product forms an odorless and taints free bitumen film suitable for the protection of metals, concrete roofing, felt, fiber cement, corrugated iron, asphalt and wood against water attack.

Read more
Construction

Rubberized Bitumen Coating

Nurcoat (Rubberized Bitumen Emulsion) is a thixotropic cold applied rubberized bitumen emulsion, single component dark brown liquid, which dries to provide a flexible, resilient coating.

Read more
Construction

Bitumen Sealant

NURMASTIC (Rubberized Bitumen Sealant) is a single component, ready to use bitumen sealant with selected grade of asphalt, high content of elastomeric rubber, fibres, mineral filler, anti-sagging agent and fast evaporating solvent. NURMASTIC can be used for sealing and waterproofing of joints, cracks, holes, etc. Once cured, NURMASTIC forms black flexible sealant with excellent adhesion to most of construction products.

Read more
Product Info

Bitumen

Bitumen is a product of Crude oil Distillation. It is a semi-solid hydrocarbon product produced by removing the lighter fractions (such as liquid petroleum gas, petrol and diesel) from heavy crude oil during the refining process. As such, it is correctly known as refined bitumen.

Read more
Bitumen

Bitumen Applications

Known for its adhesive and cohesive assets, bitumen is mostly utilised in the construction industry. Bitumen is applied on road paving because it is viscous when hot, but solid once it cools down. Therefore Bitumen operates as the binder/glue for pieces of the aggregate.

Read more
Construction

Bitumen Paint

Bituminous paints are made of bitumen or coal tar which is dissolved in mineral spirit or naphtha. Bitumen is also known as asphalt which is sticky, black, and highly viscous liquid or semi-solid form of petroleum.

Read more
Bitumen

Bitumen standards & Grades

In different regions and countries, different Standards and Grading systems are used for determining the quality of petroleum bituminous Binders. The most recognized standards for petroleum bitumen are published by

Read more
Bitumen

Packing & Logistics

Read more
Bitumen

Bitumen Production Process

Of the wide variety of crude oils commercially available, only a limited number are considered suitable for producing bitumen of the required quality in commercial quantities. In general, these are heavy crude oils with a high sulphur content.

Read more
Packing & Logistics

Bitumen Drum Packing

The drumming facilities are majorly located in the Middle East and manufacture high quality new steel drums using high quality Standardized Steel produced by companies all in conformity to EN DIN standards or ASTM Standards. In these drumming facilities under the supervision of QC Management System and Supervision, Bitumen is packed in corrugated cold rolled steel drums.

Read more
Packing & Logistics

Bitumen in Polybags

The Polybag is filled with bitumen that is exactly cooled down to a temperature slightly higher than the softening point - and lower than the melting point of the plastic liner material of the bag into a special Polyolefin Bag and is let down to harden and become solid for easy handling and cold transportation.

Read more
Bitumen

Bitumen Packing Comparison

Read more
Packing & Logistics

Bitumen in Bulk Vessel

Bulk Bitumen Tanker availability on some Global Markets is quite tight and insufficient vessels are available, however making use of our good network of ship owners, tanker operators and our integrated own shipping team will assist our clients to materialize bulk bitumen supplies. The company also has strong relationships with many refiners of bitumen both small and large throughout the world and is therefore able to offer a wide range of bulk bitumen supply solutions.

Read more
Packing & Logistics

Bitumen in Tank Containers

Our Bitumen tank containers are used for the transport and storage of bitumen emulsions, PMBs and heavy fuel oils. They maximise product carrying capacity within the constraints of a standard ISO shipping slot space. Bitumen thanks are ideal for temporary storage depots and job sites.

Read more
Sulphur

Sulphur Production & Uses

Production of Sulphur carried out in three basic ways:

Read more
Sulphur

Forms of Sulphur

The majority of sulphur that is transported around the world is done as a bulk solid. The sulphur is often stored in the open in huge stockpiles at terminals ready to be loaded onto ships, railcars or truck or at plant sites to be melted and used in the production of sulphuric acid. Most sulphur stockpiles are located outdoors in open where it is exposed to wind, rain, dust, salt air, etc. In some cases sulphur is stored indoors where some protection from the elements is available.

Read more
Sulphur

What is Sulphur?

The group 6A elements are listed in the Table on the side here. This goup of elements are intimately related to our lives. We need oxygen all the time through out our lives. Did you know that sulfur is also one of the essential elements of life. It is responsible for some of the protein structures in all living organisms. Many industries utilize sulfur, but emission of sulfur compounds is often seen more as a problem than the natural phenomenon. The matallic properties increase as the atomic number increases. The element polonium has no stable isotopes, and the isotope with mass number 209 has the longest half life of 103 years.

Read more
Sulphur

Sulphur Facts

Sulphur is an element that occurs naturally in the environment and is the sixteenth most abundant element in the earth’s crust. It's an essential component of all living cells.

Read more
Guides

INCOTERMS® 2010 Quick Reference Chart

INCOTERMS® IS A REGISTERED TRADEMARK OF THE INTERNATIONAL CHAMBER OF COMMERCE. THIS DOCUMENT IS NOT INTENDED AS LEGAL ADVICE BUT IS BEING PROVIDED FOR REFERENCE PURPOSES ONLY. USERS SHOULD SEEK SPECIFIC GUIDANCE FROM INCOTERMS® 2010 AVAILABLE THROUGH THE INTERNATIONAL CHAMBER OF COMMERCE AT WWW.ICCBOOKS.COM

Read more
Nuroil

Request a Quote

Due to the many enquiries we receive from different types of buyers on a daily basis, many of them happen to have been misguided on how the business works. So in order to meet your requirements more specifically, we require that you fill the quote form below with necessary details as specified so that we can better serve you.

Read more
Guides

Import & Export Terms

Our import/export glossary of terms - international trade terms

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 4 March 2026

Global bitumen markets are entering a transitional phase as winter conditions gradually give way to spring construction activity across several regions. Supply chain movements, refinery operations, and infrastructure planning continue to influence trade patterns and procurement strategies.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 25 February 2026

Global bitumen markets opened the year with contrasting regional dynamics. While harsh winter conditions slowed activity in Europe, African markets began regaining momentum and Asia navigated weather-related and seasonal shifts. This report highlights the key developments shaping trade and project planning worldwide.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 18 February 2026

Global bitumen markets this week were shaped by adverse weather conditions in Europe, strong import demand across West Africa, and holiday-driven slowdowns in Asia. While seasonal factors continue to weigh on consumption in several regions, underlying infrastructure demand remains resilient, particularly in emerging markets.

Read more
Market insights

News & Articles

Global Bitumen Market Dynamics: Regional Supply, Demand, and Key Trends

Read more
Nuroil

Terms of use

The terms that apply to using the Nuroil Trading website, including product information, chatbot answers and intellectual property.

Read more
Nuroil

Privacy policy

How Nuroil Trading collects, uses and protects personal information through its website, enquiry forms, chatbot and live chat.

Read more
Expert knowledge

Why is the actual capacity of automotive fuel tanks bigger than nominal capacity?

“It seems like the fuel tank is filled up more than the rated capacity!!!” “It’s never been like that!!!” Driver may have all experienced something like these. Especially when filling up the car, drivers sometimes doubt if the right amount of fuel is filled for these reasons. So it does when the amount of fuel remained and filled exceeds the capacity of a fuel tank officially indicated by automakers. However if the difference is merely 5~10 liters, this is natural. It’s because it was originally designed to be larger than the nominal capacity of a fuel tank specified in the user’s guide.

Read more
Expert knowledge

Can I identify if the vehicle has problem by the color of exhaust gas?

The color of exhaust gas slightly differs from vehicles, but is usually divided into colorless, white, black, and blue-gray. Therefore the color of gas emitted from a car’s muffler shows the condition of engines and the cause of failures. Then how does the cause of failure differ according to the color of exhaust gas?

Read more
Expert knowledge

About "Bright Stock"

"Bright Stock" refers to lube base oils of high viscosity produced by atmospheric distillation and vacuum distillation, then extracting and dewaxing solvents from residual oils, and finally hydro finishing.

Read more
Expert knowledge

Marine Oil – Cylinder Oil & System Oil

There are two types of marine diesel engines: crosshead and trunk piston. In crosshead marine diesel engines, the cylinder and crankcase are separated by a partition, and the pressure pushing the piston down is imparted to the crankshaft through the piston rod and the connecting rod.

Read more
Expert knowledge

Lubrication Characteristics of LPG Engines & Required Performance

1. Lubrication of LPG Engine- LPG engines employ, with minor differences, a similar lubrication system to those of gasoline or diesel engines - Using generic gasoline engine oil is permissible under normal operating conditions. However, under severe operating conditions involving extreme loads, the viscosity of engine oil increases, causing bearings to wear out at an accelerated pace

Read more
Expert knowledge

What is automotive gear oil ?

Automotive gear oil can be broadly divided into Manual & Automatic Transmission Oil and Differential Gear Oil. LSD gear oil is a specialized sub-type of the differential gear oil.

Read more
Expert knowledge

What should I do if my industrial gear oil looks milky or hazy?

It’s unusual for industrial gear oil to have a milky appearance because it has good water separation properties. Free water should be settling down to the bottom of the reservoir tank, which can easily be drained out.

Read more
Expert knowledge

Classification of Industrial Gear Oil Types

The most extensively referenced industrial oil classification is the one established by ANSI/AGMA (American National Standard Institute/American Gear Manufacturers Association) that classifies industrial gear oils where gear oils are classified into four types as shown in the following table :

Read more
Expert knowledge

Penetration Test on Bitumen

Bitumen is a product of crude oil distillation. It's a black, sticky and viscous material commonly used in road construction and waterproofing applications. The penetration grade of bitumen refers to its level of hardness or stiffness, which is measured using a standard penetration test. Bitumen penetration test is done to evaluate the consistency and hardness of bitumen which helps to determine the penetration value.

Read more
Expert knowledge

How To Choose Right Grade of Bitumen?

Based on a variety of criteria, bitumen is divided into distinct grades. The type of application, the climate, the amount of traffic, and other factors that are important for achieving the intended outcomes are all taken into consideration when choosing the optimum grade of bitumen. The following are a few elements that can be used to choose the right bitumen grade.

Read more
Market insights

The Legendary Project - The Mozambique N6 Highway

Mozambique N6 National Road Reconstruction and Expansion Project was one of the prestigious projects dubbed as “Legendary” because of its emphasis on disaster resilience and preparedness. The project was built by China State Construction Engineering Corporation Ltd (CSCEC). Nuroil was proudly a part of this project during Oct, 2017-May 2018.

Read more
Market insights

Ethiopia Development Project Jigjiga-Gelelesh-Degehamdo Road

Jijiga-Gelelesh-Degehamdo road is a road in Ethiopia that connects the cities of Jijiga, Gelelesh, and Degehamdo. Ethiopia's roads can be difficult to navigate because of the country's rugged terrain and lack of proper maintenance in some areas. It's important to note that infrastructure development projects can encounter a number of difficulties, including funding, environmental impact, and land acquisition issues, which can affect the project's timeline. The Jijiga-Gelelesh-Degehamdo road project is a planned road construction project in Ethiopia which aims to improve transport between the cities of Jijiga, Gelelesh, and Degehamdo.

Read more
Market insights

Monsoon preparation: Plastic road to smoothen bumpy rides

Preparing for the monsoon, the Greater Hyderabad Municipal Corporation (GHMC) is laying a three-km plastic road at Sainikpuri Colony. This is the longest stretch of plastic road in Hyderabad. Earlier a 100-metre stretch was laid connecting Nagole and Uppal metro station on an experimental basis, and a 300-metre stretch was laid at Saidabad in Old City

Read more
Market insights

GHMC trying innovative options for laying roads

Laying emphasis on longevity of roads, the Greater Hyderabad Municipal Corporation (GHMC) is recarpeting few stretches using plastic and Crumb Rubber Modified Bitumen methods.

Read more
Market insights

Turkmenistan increases paving bitumen production

The paving bitumen production at Turkmenistan's Turkmenbashi Complex of Oil Refineries (TCOR) has increased, reads a message from the country's Oil and Gas Ministry.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 04 February 2026

Global bitumen markets moved through a week defined by seasonal slowdowns in Europe, expanding infrastructure momentum in Africa, and strategic buying pauses across Asia-Pacific. Weather disruptions, refinery maintenance cycles, and shifting vessel activity continue to shape near-term trade flows across major regions.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 28 January 2026

Global bitumen markets are moving through a seasonal transition, shaped by winter weather in Europe, steady import planning across Africa, and tactical buying slowdowns in Asia-Pacific ahead of regional holidays. Supply chains remain active, but demand signals differ widely by region.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 21 January 2026

Global bitumen markets entered the year under mixed conditions, shaped by seasonal weather, regional infrastructure cycles, and evolving logistics patterns. While some regions experienced temporary slowdowns, others showed clear signs of renewed project momentum.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 11 February 2026

Global bitumen markets are entering a transitional phase as seasonal weather patterns, logistics adjustments, and infrastructure investment cycles influence regional demand. While Europe navigates winter constraints, Africa continues active project execution, and Asia-Pacific markets balance holiday slowdowns with strategic procurement planning.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 24 December 2025

This week’s global bitumen market activity reflects seasonal slowdowns in Europe, strong import momentum across Africa, and varied project progress in Asia. Weather conditions, supply chain adjustments, and refinery operations played a major role in shaping regional demand patterns.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 17 December 2025

Global bitumen markets moved into a seasonal transition phase this week. Winter conditions, weather disruptions, refinery maintenance, and shifting logistics flows reshaped regional demand patterns across Europe, Africa, and Asia-Pacific.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 7 January 2026

Global bitumen markets closed the year with mixed signals, shaped by seasonal slowdowns, logistics planning, and shifting regional demand. As 2026 begins, each region is entering the new year with distinct supply and project dynamics.

Read more
Market insights

Maharashtra government to use plastic waste in building roads

Maharashtra government has decided to use plastic waste along with tar in a bid to improve the durability and longevity of asphalt roads and reduce soil pollution.

Read more
Market insights

Woqod buys bitumen tanker for USD 6 Million

Qatar Fuel (Woqod) has purchased a bitumen tanker with modern specifications from China for $6m.

Read more
Market insights

Argus Asia-Pacific and Middle East Bitumen 2014

To mark this milestone, Argus Asia-Pacific and Middle East Bitumen 2014 has a bold new agenda with many new interactive elements. Over the past decade this has become a must-attend event for the bitumen trade industry, offering unparalleled networking opportunities and an esteemed line-up of speakers.

Read more
Market insights

Ivory Coast May Double Bitumen Capacity For Africa Road Projects

Ivory Coast’s Societe Multinationale de Bitumes may more than double bitumen production capacity by 2020 to meet demand for the construction material used in road projects in West and Central Africa.

Read more
Market insights

Plastic waste to be mixed in bitumen for road works

Union minister for road transport and highways Nitin Gadkari said the central government has come up with new policy permitting 8% plastic waste to be mixed with bitumen in road asphalting works. He claimed the policy was framed for transforming waste to wealth and also disposal of plastic waste, which is a threat to environment.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 12 November 2025

Global bitumen markets entered November with contrasting regional momentum. While Europe cooled under seasonal slowdowns and refinery disruptions, African terminals saw vibrant activity ahead of year-end projects. Meanwhile, Asia navigated a blend of strong domestic demand in India and logistical delays from ongoing monsoon conditions.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 26 November 2025

This week’s global construction input landscape reflects significant seasonal shifts. Europe is moving deeper into its winter slowdown, several African regions are scaling up activity under improving conditions, and Asia-Pacific markets continue to navigate monsoon-driven delays and tactical procurement strategies. Refineries, logistics flows, and on-ground project conditions are shaping how demand evolves across all regions.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 05 November 2025

As October closed, the global bitumen market reflected a blend of seasonal transitions and operational adjustments. European supply chains managed refinery outages, African markets intensified import activity ahead of year-end projects, and Asian demand softened under persistent rainfall. Despite regional contrasts, one trend stood out — logistics agility remained central to market resilience.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 29 October 2025

The global bitumen market this week reflected diverging seasonal dynamics. Europe approached its winter slowdown with cautious procurement; Africa saw a strong uptick in road-building activity as dry weather set in; and Asia navigated through a soft demand phase amid ample supply and holiday disruptions.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 24 September 2025

The global bitumen market this week reflected a mix of seasonal shifts, logistical bottlenecks, and regional policy developments. While Europe grapples with oversupply and cautious demand, Africa’s construction sector is preparing for the end of the rainy season, and Asia navigates weather disruptions and cautious procurement strategies.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 15 October 2025

The global bitumen landscape this week highlights diverging regional dynamics. Europe’s seasonal slowdown contrasts with steady African import activity and oversupplied Asian markets. While weather, refinery turnarounds, and cargo logistics continue to shape short-term availability, longer-term planning for 2026 term contracts has already begun.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 22 October 2025

This week’s global bitumen market reflected contrasting regional dynamics — while Europe faced seasonal demand slowdowns and refinery maintenance issues, Africa saw renewed import activity ahead of the dry construction season. Meanwhile, Asia-Pacific markets navigated between stable export flows and tactical procurement strategies shaped by changing weather and logistics conditions.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 1 October 2025

This week’s global bitumen market update highlights how seasonal shifts, refinery maintenance, and regional weather continue to shape supply and demand dynamics. From Europe’s steady but cautious activity, to Africa’s weather-driven delays, and Asia’s procurement hesitations, the market shows signs of both resilience and uncertainty.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 09 July 2025

Seasonal pressures are reshaping global bitumen flows. As Europe prepares for its annual construction lull, West Africa battles seasonal rainfall, and Asia navigates monsoons and supply tightness. Strategic shifts in procurement, logistics, and refinery output are now setting the tone for Q3.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 02 July 2025

This week’s global bitumen market reflected typical seasonal highs in Europe, strategic import activity in Africa, and monsoon-driven recalibrations across Asia. Amid improving European supply flows and Africa’s balancing act between weather and infrastructure needs, Asia-Pacific buyers tread cautiously as rains impact project schedules.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 25 June 2025

This week’s global bitumen market was shaped by rising crude costs, seasonal construction cycles, and major geopolitical tensions. While Europe and Africa respond to project logistics and supply pressures, Asia navigates monsoon impacts and freight uncertainties. Let’s break down the developments.

Read more
Market insights

Secure Your Sale! 💰 Navigating International Payment Terms

Entering new foreign markets is a thrilling opportunity to expand your business by reaching a wider audience and attracting more clients. Ensuring that you get paid safely and on time is one of the most significant challenges that international transactions present. There is a risk of nonpayment due to factors such as physical distance, varying legal systems, currency volatility, and the difficulty of thoroughly screening potential new investors.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 11 June 2025

Regional differences are increasingly defining the bitumen market as the world enters the peak of the building season. Africa experiences steady import activity with significant infrastructure optimism, while Europe faces challenges from delayed refinery restarts and rising demand. Asia-Pacific, on the other hand, is experiencing a transitional slowdown as a result of both delayed procurement cycles and weather-related disruptions.

Read more
Market insights

Global Bitumen Market Outlook ( End-May 2025 ): Regional Trends & Supply Shifts

The global bitumen market entered a pivotal phase by the end of May 2025, marked by contrasting regional dynamics and shifting supply-demand balances. In Europe, renewed refinery operations and seasonal construction activity intersected with funding delays in Central and Eastern regions. Sub-Saharan Africa witnessed accelerated import demand ahead of the rainy season, even as production hiccups in South Africa increased reliance on imports. Meanwhile, Asia-Pacific and Middle East markets remained cautious amid monsoonal slowdowns in India, mixed refinery outputs in Southeast Asia, and inventory-driven hesitancy in China. This concise overview highlights the critical trends, logistical challenges, and infrastructure-led momentum shaping the global bitumen landscape at month-end.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 18 June 2025

The complex interaction of changing infrastructure demand, geopolitical tensions, and seasonal variations is reflected in this week's global bitumen market. Some areas experience stagnation as a result of delayed policies or bad weather, while others increase procurement in anticipation of the monsoon or summer peak.

Read more
Market insights

Global Bitumen Market Report – 3rd Week May 2025: Navigating Shifting Trends Across Regions

The global bitumen market is a complex web of regional demands, supply dynamics, and economic influences. As we move further into Q2 2025, a closer look at North & Central Europe, Sub-Saharan Africa, and the Asia-Pacific & Middle East reveals a mosaic of evolving conditions that are crucial for industry stakeholders. This week's market commentary highlights significant shifts, from nuanced pricing movements to critical supply chain adjustments and varied demand patterns.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 17 September 2025

The global bitumen market is navigating seasonal changes, shifting procurement strategies, and ongoing refinery turnarounds. While Europe shows signs of post-holiday recovery, Africa faces weather disruptions, and Asia-Pacific demand is shaped by monsoon conditions and cautious buying activity.

Read more
Market insights

Global Bitumen Market Report (Week Ending May 23, 2025): Regional Demand Shifts and Supply Dynamics

The global bitumen market presented a varied and evolving picture in the week ending May 23, 2025. Across Europe, Sub-Saharan Africa, and the Asia-Pacific & Middle East, market conditions were shaped by seasonal bitumen demand fluctuations, ongoing supply chain adjustments, significant refinery activities, and the underlying momentum of infrastructure projects. While some regions experienced heightened bitumen demand for construction, others faced challenges from weather patterns and logistical complexities. This weekly market report provides a concise overview of these key trends influencing the worldwide bitumen industry.

Read more
Market insights

Global Bitumen Market Report – Mid May 2025: Navigating Shifting Trends Across Regions

The global bitumen market in 2025 is facing dynamic shifts, influenced by regional demand fluctuations, price adjustments, and ongoing supply chain challenges. As the world moves through unpredictable economic conditions, stakeholders must stay informed to navigate the complexities of this essential commodity. This report dives into key regions—including Asia-Pacific, the Middle East, Africa, and Europe—providing an in-depth look at the latest trends shaping the bitumen market.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 3 September 2025

This week’s global market update reflects a turning point. Europe prepares for post-holiday recovery, Africa strengthens its import logistics despite seasonal and financial challenges, and Asia-Pacific faces weather-related delays while cautiously planning ahead.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 20 August 2025

This week’s global bitumen trends point to contrasting activity across the continents. While Europe slows due to seasonal holidays, parts of Africa and Asia are navigating weather and logistics pressures to maintain supply chains. Procurement strategies, refinery restarts, and vessel movements continue to shape the momentum for Q3.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 10 September 2025

This week’s global market update shows a dynamic balance between seasonal demand shifts and logistical challenges. While Europe navigates refinery maintenance and holiday restarts, Africa faces weather-related slowdowns, and Asia-Pacific continues to adjust to monsoon-driven demand cycles — with India playing a pivotal role.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 27 August 2025

This week’s bitumen market reflects a sharp divide across continents: while seasonal holidays cooled activity in Europe, East Africa and select parts of Asia saw steady demand. Shifts in logistics, refinery schedules, and regional weather played a central role in shaping the week’s supply dynamics.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 06 August 2025

As July closes, the global bitumen market reveals a blend of seasonal slowdowns, weather-driven disruptions, and proactive procurement. Europe eases into its summer lull, Africa navigates logistical pressures and rain delays, and Asia braces for monsoon season with shifting supply strategies.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 30 July 2025

The global bitumen market is navigating seasonal transitions and logistical constraints. While European regions enter the summer lull, African nations face heavy rains and import hurdles. In Asia, buyers are tactically adjusting to weather patterns and tight supply across hubs like Singapore and East China.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 13 August 2025

The global bitumen market is navigating seasonal transitions and logistical constraints. While European regions enter the summer lull, African nations face heavy rains and import hurdles. In Asia, buyers are tactically adjusting to weather patterns and tight supply across hubs like Singapore and East China.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 23 July 2025

As mid-July unfolds, global bitumen markets reflect a mixed bag of construction demand, procurement delays, refinery restarts, and emerging logistics challenges. While Northwest Europe prepares for a summer slowdown, Africa navigates weather constraints, and Asia adjusts to monsoon-induced volatility.

Read more
Market insights

Supply Shocks & Shifting Sands: Global Bitumen Market Navigates Uncertainty

The international bitumen market presented a mixed picture in early April, characterized by regional demand fluctuations, varied supply conditions, and emerging logistical challenges. While milder weather began to stimulate activity in some parts of Europe, holidays dampened demand in Asia and the Middle East. Significant supply chain developments, including planned refinery production halts and shipping concerns, are poised to influence market dynamics in the coming months.

Read more
Market insights

Global Bitumen Market Pulse: Regional Shifts and Demand Dynamics Shape Early May 2025

It's a fascinating time in the global bitumen market. As we step into May 2025, the landscape looks like a complex puzzle with pieces shifting across different regions. The main story? A widespread easing in price trends, largely thanks to lower feedstock costs, is meeting the hopeful rise of seasonal demand. But, as always, the reality on the ground varies greatly. Let's take a pulse check across Europe, Africa, and the Asia-Pacific/Middle East in this market report.

Read more
Market insights

Global Bitumen Market Trends & Trade Insights Edition: Mid-Week 16 July 2025

Mid-July brings contrasting forces in the global bitumen landscape. Europe prepares for its summer holiday pause, Africa adapts to seasonal rains and refinery disruptions, while Asia faces tight regional supply and tactical procurement shifts. Supply chain dynamics, weather delays, and demand rebalancing are shaping Q3 strategies across continents.

Read more
Market insights

Global Bitumen Market Navigates Complex Dynamics: Mid-Week Insights

The global bitumen market is experiencing a period of intricate fluctuations, driven by a combination of refinery maintenance, fluctuating fuel oil prices, and distinct regional demand patterns. This mid-week market pulse reveals a landscape where industry players are navigating a series of challenges and opportunities.

Read more
Market insights

IMO 2020: The calm before the storm

The shipping industry has known about the mandated shift to low sulphur fuel for approaching three years, but details remains elusive about the availability and pricing of compliant products.

Read more
Market insights

Method adpoted to reduce the price of Bitumen by compromising quality

Unfortunately, we have recently noted that several suppliers have attempted to sell low-quality Bitumen as the standard Bitumen. These products do not satisfy the required any Bitumen standards. Here are some examples on how these low-quality products are made:

Read more
Market insights

Nigeria: Govt to Scale Down U.S.$1.96 Billion Bitumen Import Bill

The nation may conserve the $1.9 billion (N300 billion) foreign exchange being expended on the yearly importation of bitumen into the country, going by the current moves by the Federal Government to enhance local production.

Read more
Market insights

Mix Plastic Waste With Bitumen To Climate-Change-Proof Ghana’s Roads

Ghana’s President Mahama announced a few days ago that a sum of U.S.$750 million had been earmarked for the building of new roads – and the rehabilitation of a number of existing ones.

Read more
Market insights

Why Asian refiners switch to fuel oil from costly crude?

Asian refiners are increasingly replacing costlier crude oil with a low-value oil product to produce higher value fuels, in an attempt to control costs and stem a decline in profitability.

Read more
Market insights

Developments in Sri Lanka’s bitumen demand

The annual Argus Asian Bitumen conference is Asia’s longest-running bitumen event offering very informative presentations and ample networking opportunities. Conference 2013 was held at Pan Pacific Hotel Singapore and attended by an audience of over 150 participants who are leaders in the Bitumen industry, professionals, academics and other industry stake holders in Asia and other regions.

Read more
Petroleum

SN 70 Base Oil

SN 70 Group I base oil. Grade overview, formulation fit and supply details, with the technical data sheet available on request.

Read more
Petroleum

SN 150 Base Oil

SN 150 Group I base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

SN 500 Base Oil

SN 500 Group I base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

SN 650 Base Oil

SN 650 Group I base oil. Grade overview, formulation fit and supply details, with the technical data sheet available on request.

Read more
Petroleum

Bright Stock Base Oil

Bright Stock Group I base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

N 70 Base Oil

N 70 Group II base oil. Grade overview, formulation fit and supply details, with the technical data sheet available on request.

Read more
Petroleum

N 150 Base Oil

N 150 Group II base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

N 500 Base Oil

N 500 Group II base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

N 600 Base Oil

N 600 Group II base oil. Grade overview, formulation fit and supply details, with the technical data sheet available on request.

Read more
Petroleum

4 cSt Base Oil

4 cSt Group III base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

6 cSt Base Oil

6 cSt Group III base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
Petroleum

8 cSt Base Oil

8 cSt Group III base oil. Technical properties, viscosity data and test methods for your formulation and supply requirements.

Read more
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote