Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / BASE OIL / GROUP I / SN 500

SN 500.Group I base oil.

A higher-viscosity solvent-neutral base oil. Compare the properties that matter to your lubricant formulation.

  • 9.7–12.0 cSt at 100 °C
  • VI 95–100
  • Flash point 210 °C min
  • Solvent refined
Amber Group I base oil sample, steel drum and solvent refinery in pencil style
GroupI · solvent refinedVI 95–100
SN 500KV40 90–105 cStHigher-viscosity solvent neutral
HazardNot classifiedUN Not regulated
KV at 40 °C90–105 cSt
KV at 100 °C9.7–12.0 cSt
Viscosity index95–100
Flash point210 °C min
Pour point−6 °C max
Switch gradeThe Group I grades
Compare Group I
01 THE GRADE

What is SN 500?

A higher-viscosity solvent-neutral base oil. Compare the properties that matter to your lubricant formulation.

Group I is produced by solvent extraction and dewaxing of vacuum-distilled petroleum fractions. Its natural solvency and broad viscosity range continue to suit many proven lubricant and process-oil formulations.

Share your application, target viscosity and additive system and our team will confirm the fit and the supply arrangement.

Identity
Group
I · solvent refined
KV40
90–105 cSt
VI
95–100
Group I base oil · solvent-refined mineral oil
Why SN 500
  • Lowest relative base-stock costSupports cost-sensitive, high-volume formulations.
  • Established formulation historyFamiliar handling and performance across mature lubricant markets.
  • Useful natural solvencyHelps dissolve and carry some additive systems and process ingredients.
  • Access to Bright StockHeavy viscosity that is not widely available from every base oil group.
What Nuroil does on every order

Why choose SN 500 from Nuroil?

  • Checked against the batch CoA

    Every shipment carries a Certificate of Analysis confirming the key grade properties.

  • Grade matched to your formulation

    Share your application, target viscosity and additive system and we confirm the fit.

  • Drum to bulk

    Drums, IBCs, flexitanks and road tanker or bulk, sized to your consumption.

  • One desk, firm offers

    FOB Jebel Ali, Port Khalid or Hamriyah; CFR and CIF on request, usually within 24 hours.

02 TECHNICAL DATA

Catalogue specification.

Kinematic viscosity at 100 °C
9.7–12.0 cStASTM D445
Kinematic viscosity at 40 °C
90–105 cStASTM D445
Viscosity index (VI)
95–100ASTM D2270
Flash point
210 °C minASTM D92
Sulphur content
0.15–0.60 wt%ASTM D2622
Pour point
−6 °C maxASTM D97
Density at 15 °C
0.885–0.895 kg/LASTM D1298
Colour
2 maxASTM D1500
Total acid number (TAN)
0.05 mg KOH/g maxASTM D664
Carbon residue
0.12 wt%ASTM D189
03 HOW IT IS MADE

Solvent refining.

Group I is produced by solvent extraction and dewaxing of vacuum-distilled petroleum fractions, then finished and tested against the grade specification.

  1. 01

    Vacuum distillation

    Petroleum fractions are separated by boiling range

  2. 02

    Solvent extraction and dewaxing

    Solvents take out aromatics and wax

  3. 03

    Finishing

    The oil is finished for colour and stability

  4. 04

    Testing

    Each batch is tested against the grade specification

Crude oilFurnaceVacuumH₂Base oilDrums · bulk01Vacuumdistillation02Solvent extractionand dewaxing03Finishing04Testing
04 APPLICATIONS

Where it is used.

05 SAFETY & HANDLING

Generally not classified. Handle it cleanly.

Base oils are generally not classified as hazardous. The Safety Data Sheet for the offered grade decides; review it before first handling.

Not classified
  • GHS Base oils are generally not classified as hazardous. Check the SDS for the offered grade.
UN
Not regulated
Transport
Not dangerous goods, per SDS
  1. 01
    Follow the SDS

    Classification, first aid and fire-fighting measures are on the Safety Data Sheet for the offered grade.

  2. 02
    Wear suitable PPE

    Use appropriate protective equipment during transfer, sampling and spill response.

  3. 03
    Contain spills

    Absorb spilt oil and keep it out of drains and watercourses.

  4. 04
    Keep it clean

    Use closed, clean equipment so the oil stays free of water and other products.

Clean, dry and closed.
Keep itClean, dry and closed

Use closed, clean tanks and protect the oil from moisture and contamination. The batch CoA records the delivered quality.

  • Keep it dryClosed, clean tanks; protect the oil from moisture and contamination.
  • Separate gradesDedicate or thoroughly clean lines, pumps and tanks before grade changes.
  • Control temperatureFor heavy grades and Bright Stock, keep to the agreed transfer temperature without overheating.
  • Use safe practiceConsult the SDS and use appropriate PPE during transfer, sampling and spill response.
Standards and regulatory reference.
  • HS code2710.19
  • TransportNot regulated
API Base Oil Interchange Guidelines
Defines Group I by saturates, sulphur and viscosity index
ASTM D445 / D2270
Kinematic viscosity and viscosity index
ASTM D92 / D97
Flash point and pour point
ASTM D2622
Sulphur content
ASTM D1298 / D1500 / D664 / D189
Density, colour, acid number and carbon residue
REACH (EU)
Chemical registration requirements for relevant imports into the EU
Destination regulations
National chemical and commodity import rules vary by market
06 PACKING OPTIONS

Drum, IBC, flexitank or bulk.

Packing availability is confirmed for SN 500 and the offered origin. Container loads in the planner are typical planning figures; the offer confirms them.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

720 ft containers
drums
556
Last 20 ft container
94% full
  • Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
  • OfferWithin 24 hoursGrade, viscosity target, quantity, packing and destination
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
07 BEFORE YOU ORDER

Frequently asked questions.

01What is SN 500 base oil used for?

A higher-viscosity solvent-neutral base oil. Compare the properties that matter to your lubricant formulation. Tell us your application, target viscosity and additive system and we will confirm the fit.

02Can I download the SN 500 specification?

Yes. The technical data sheet and the specification sheet are available as PDF downloads on this page.

03What is Group I base oil?

Group I is a mineral base oil produced mainly by solvent refining. It typically has a viscosity index between 80 and 120, less than 90% saturates and more than 0.03% sulphur.

04Is Group I suitable for engine oil?

It remains suitable for many established and cost-sensitive lubricant formulations. Modern low-emission or extended-drain engine oils may require Group II or III performance; confirm the finished formulation target.

05What documents come with each shipment?

Every shipment includes a Certificate of Analysis confirming key grade properties. Certificate of Origin, SDS and third-party inspection reports are available on request.

06What packing formats are available?

Drums, IBCs, flexitanks and road tanker or bulk shipment. Availability depends on the grade, quantity and receiving facilities.

07What Incoterms do you offer?

FOB is our standard quoted term from Jebel Ali, Port Khalid and Sharjah Hamriyah. CFR and CIF offers to your destination port are available on request.

08What is the minimum order quantity?

MOQ depends on the grade and packing format. Share your requirement and we will confirm feasibility with your quote.

FROM SPECIFICATION TO SUPPLY

Discuss your SN 500 requirement.

Share the grade, viscosity target, quantity, packing and destination. Our team replies with the offer within 24 hours. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Grade and viscosity target
  • Drums, IBCs, flexitank or bulk
  • FOB, CFR or CIF
Request a quote
FROM THE KNOWLEDGE CENTRE

Guides & articles

Written by our trade desk to help you specify, compare and buy with confidence.

All guides & articles
ArticleLubricants · 1 minAbout bright stock

Bright Stock refers to lube base oils of high viscosity produced by atmospheric distillation and vacuum distillation, then…

Read
ArticleLubricants · 1 minWhat is automotive gear oil?

Automotive gear oil can be broadly divided into Manual & Automatic Transmission Oil and Differential Gear Oil. LSD gear oil is a…

Read
ArticleLubricants · 2 minClassification of industrial gear oils

The most extensively referenced industrial oil classification is the one established by ANSI/AGMA (American National Standard…

Read
GuideLubricants · 3 minBase oil grades and specifications explained

A reference to API base oil groups, common grade names such as SN150 and SN500, the tests on a base oil certificate and typical…

Read
GuideLubricants · 3 minBase oil storage, handling and contamination control

How to keep base oil on specification from receipt to blending: drum and tank storage, water and dirt control, dispensing and…

Read
GuideLubricants · 3 minPacking options for base oil

Drums, IBCs, flexitanks, ISO tanks and bulk vessels for base oil: how they compare on volume, handling, contamination risk and…

Read
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote