Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Guide3 min read7 sections

Knowledge centre · Lubricants & base oil

Packing options for base oil

Drums, IBCs, flexitanks, ISO tanks and bulk vessels for base oil: how they compare on volume, handling, contamination risk and receiving needs.

Written by the Nuroil trade desk, Sharjah

Pencil sketch of base oil storage and blending
On this page · 7 sections
  1. 01Steel drums
  2. 02IBCs
  3. 03Flexitanks
  4. 04ISO tank containers
  5. 05Bulk vessel parcels
  6. 06Comparison at a glance
  7. 07What to agree in your order

Base oil can be shipped in anything from a single drum to a full tanker cargo. The right choice depends on how much you buy, how you receive and store it, and how quickly you use it. This guide compares the main options for international shipment.

Steel drums

Drums are the most flexible format. They suit small and mid-sized buyers, trial orders, distributors who resell in smaller lots, and sites without bulk tanks.

  • Easy to store, move with standard equipment and sell on in part loads.
  • A 20-foot container holds about 80 to 90 drums on pallets, around 17,000 litres of product, which is less than other formats.
  • Packaging adds weight and cost, and empty drums need disposal or reconditioning.
  • Drums can rub together and leak in transit if not properly secured, and they are prone to water ingress if stored outdoors incorrectly.

IBCs

Intermediate bulk containers (totes) of around 1,000 litres sit between drums and bulk. A 20-foot container holds about 18 of them, roughly 18,000 litres. They are convenient for plants that consume a few thousand litres a month and want fewer containers to open, but they need forklift handling and a dry, covered storage area.

Flexitanks

A flexitank is a single-use multilayer bag fitted inside a standard 20-foot container. It is one of the most common ways to ship base oil to buyers without access to a bulk terminal.

  • Capacity is typically in the 14,000 to 26,000 litre range, with 24,000 litres a common size, limited in practice by the container's maximum gross weight and local road weight limits.
  • Filled from the top and discharged from the bottom valve, by gravity or with a pump for heavier grades. The receiver needs a hose and a tank ready.
  • No cleaning of the bag and no empty return, because it is used once.
  • Suitable only for non-hazardous cargo; check section 14 of the product SDS. Viscous heavy grades may need heating pads to discharge in cold climates.
  • Leaks usually come from poor installation or an unsecured valve, so use an experienced flexitank provider.

ISO tank containers

An ISO tank is a stainless steel tank inside a container-sized frame. It is robust, reusable, can be heated, and can also be used as temporary storage on site.

  • Must be cleaned between cargoes, with a cleaning certificate, to avoid contamination.
  • The empty tank has to be returned, which adds cost on one-way routes.
  • Well suited to regular deliveries into a dedicated receiving tank.

Bulk vessel parcels

Large blending plants and distributors with shore tanks buy base oil in bulk, either as a full cargo or as a parcel on a chemical or product tanker. Bulk is the most efficient option where there are terminals at both ends, but it needs significant tank capacity, jetty access and careful line and tank cleanliness.

Comparison at a glance

FormatProduct per 20-ft containerBest forReceiving needs
DrumsAbout 17,000 litresSmall volumes, trials, resaleCovered storage, drum handling
IBCsAbout 18,000 litresModerate steady useForklift, covered storage
FlexitankUp to about 24,000 litresRegular container-sized loadsTank, hose, pump if needed
ISO tankDepends on tank sizeRepeat deliveries, heated productsTank, discharge connection
Bulk parcelNot containerisedLarge blenders and terminalsShore tanks, jetty access
Choose packing by how you receive and store oil, not only by freight cost. A cheap format that arrives where you cannot discharge it is not cheap.

What to agree in your order

State the packing type, drum or bag size, number of units, net weight per unit and whether drums must be new. For flexitanks and ISO tanks, confirm the discharge valve size and whether heating is needed. Ask for the CoA, packing list and MSDS, and seal numbers recorded on the shipping documents. Nuroil can supply base oil in drums, flexitanks, ISO tanks or bulk on FOB, CFR or CIF terms; send your requirements via the quote request form.

PRODUCTS IN THIS GUIDE
KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote