Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / BITUMEN / AUSTRALIAN STANDARD / CLASS 320

Class 320.For heavy traffic.

Bitumen Class 320 or C320 is an AS 2008 Australian Standard bitumen class with a nominal viscosity of 320 Pa·s at 60°C.

  • Viscosity at 60 °C 260–380 Pa.s
  • Penetration 40 (0.1 mm) min
  • Flash point 250 °C min
  • AS 2008-2013
Paving crew resurfacing a bridge deck
StandardAS 2008-2013Penetration 40 (0.1 mm) min
Class 320260–380 Pa.sHighways and heavy-load areas in warm climates
HazardNot classifiedUN UN 3257 when shipped hot, per SDS
Viscosity at 60 °C260–380 Pa.s
Viscosity at 135 °C0.4–0.65 Pa.s
Penetration at 25 °C40 (0.1 mm) min
Flash point250 °C min
StandardAS 2008-2013
Switch gradeThe AS 2008 grades
Compare the Australian Standard grades
01 THE GRADE

What is Bitumen Class 320?

Bitumen Class 320 or C320 is an AS 2008 Australian Standard bitumen class with a nominal viscosity of 320 Pa·s at 60°C. It is classified as a harder bitumen, providing greater resistance to deformation under heavy traffic and in warm climates. This makes it suitable for demanding applications where high loads and temperature extremes are common.

The main applications of Bitumen Class 320 involve areas where high traffic loads, heavy-duty conditions, and warm climates require a bitumen with high resistance to deformation and wear. Its viscosity of 320 Pa·s at 60°C makes it ideal for demanding environments.

Bitumen Class 320 is supplied to AS 2008-2013, with viscosity at 60 °C tested to ASTM D2171 and penetration to ASTM D5.

Share the class, AS 2008 edition and road-authority requirements your project names and our team will confirm the fit and the supply arrangement.

Identity
Standard
AS 2008-2013
Viscosity at 60 °C
260–380 Pa.s
Penetration
40 (0.1 mm) min
Australian Standard bitumen · AS 2008-2013
Why Bitumen Class 320
  • AS 2008 classes and multigradeClass 50 to 600 viscosity binders and M500 and M600 Multigrade, quoted to the AS 2008 edition in your project documents.
  • Every batch testedEach batch is tested for viscosity at 60°C against the specified AS 2008 class, with results reported on its Certificate of Analysis.
  • Full shipping documentationA Certificate of Analysis travels with every shipment. Certificate of Origin and MSDS are arranged on request.
  • UAE load portsLoading from UAE ports with FOB as standard; CFR and CIF destination-port offers are quoted on request.
  • Packed for your siteNew steel drums for containerised supply, jumbo bags for compatible grades, or heated bulk by vessel and tanker.
  • Trade risk handledThe Nuroil team manages transport, insurance, logistics and foreign-currency payments, and can discuss financing options with overseas buyers.
What Nuroil does on every order

Why source Bitumen Class 320 from Nuroil?

  • Tested against your class

    Viscosity at 60 °C on every batch, against the specified AS 2008 class, reported on the Certificate of Analysis.

  • Class or multigrade, as specified

    Share the AS 2008 edition and road-authority requirements; standard classes and Multigrade are not interchangeable.

  • Drum to bulk

    New steel drums, jumbo bags, tanker vessel or tank container, matched to your receiving facilities.

  • FOB, CFR or CIF

    FOB from UAE ports; CFR and CIF destination-port offers on request.

02 TECHNICAL DATA

Catalogue specification.

Viscosity at 60 °C
260–380 Pa.sASTM D2171
Viscosity at 135 °C
0.4–0.65 Pa.sASTM D2170
Penetration at 25 °C, 100 g, 5 s
40 (0.1 mm) minASTM D5
Flash point
250 °C minASTM D92
Matter insoluble in toluene
1.0% wt maxASTM D4072
Rolling thin-film oven test (RTFOT)
Residue conditioningASTM D1754
Viscosity of residue at 60 °C, after RTFOT
300% of original maxASTM D2171
03 APPLICATIONS

Where it is used.

04 SAFETY & HANDLING

Not classified cold. Handled hot, with care.

Australian Standard bitumen is not classified as hazardous under GHS according to its Safety Data Sheet. It is stored, pumped and loaded hot, and the SDS for the offered grade decides; review it before first handling.

Not classified
  • GHS Not classified according to the SDS. Check the SDS for the offered grade.
  • Hot product Handled hot: contact causes severe burns, and hydrogen sulphide can collect in tank headspace. Per SDS.
UN
UN 3257 when shipped hot, per SDS
Transport
Elevated temperature liquid, Class 9, when hot · per SDS
  1. 01
    Hot product burns

    Contact with hot bitumen causes severe burns. Wear heat-resistant gloves, face protection and covering clothing when handling it hot.

  2. 02
    Hydrogen sulphide in the headspace

    H₂S can collect in the headspace of heated tanks and tankers. Ventilate and test the atmosphere before opening or entry, per SDS.

  3. 03
    Avoid overheating

    Prolonged excessive heat accelerates ageing before application. Use the storage and application range appropriate to the class.

  4. 04
    Follow the SDS

    Classification, first aid and fire-fighting measures are on the Safety Data Sheet for the offered grade.

Plan heating and handling.
Before it arrivesHeating and receiving confirmed

Confirm heating, storage and handling requirements for your class and packing format before shipment arrives. Bulk supply requires suitable heated tanks, pumps and transfer equipment.

  • Class temperatureUse the storage and application range appropriate to the selected class.
  • Confirm product typeStandard AS 2008 classes and Multigrade are not interchangeable.
  • Avoid overheatingProlonged excessive heat accelerates ageing before application.
  • Receiving facilitiesBulk supply requires suitable heated tanks, pumps and transfer equipment.
Standards and test methods.
  • HS code2713.20
  • Transport, coldSolid state
  • Transport, hotUN 3257
AS 2008-2013
Australian standard for residual pavement bitumen, the edition this grade’s page cites
ASTM D2171 / ASTM D2170
Viscosity at 60 °C and at 135 °C
ASTM D5 / ASTM D92 / ASTM D4072
Penetration, flash point and matter insoluble in toluene
ASTM D1754
Thin-film oven residue
State and territory road specifications
May add local requirements to AS 2008; confirm the exact standard, class and edition before ordering
05 PACKING OPTIONS

Drums, jumbo bags or bulk.

Packing availability is confirmed for Bitumen Class 320 and the offered source. Container loads in the planner are typical planning figures; the offer confirms them.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

720 ft containers
drums
556
Last 20 ft container
94% full
  • Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
  • BulkTanker vessel or tank containerPer vessel hold capacity, confirmed at booking
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
06 BEFORE YOU ORDER

Frequently asked questions.

01What does “Class 320” mean under AS 2008?

It identifies the class by its nominal viscosity at 60°C in Pa·s. Bitumen Class 320 should always be specified directly as its AS 2008 class rather than converted from another system.

02Is an AS 2008 class the same as an international grade?

It may be broadly comparable, but AS 2008 has its own boundaries and test methods. Do not assume direct interchangeability.

03What documents come with each shipment?

Every shipment includes a Certificate of Analysis. Certificate of Origin, MSDS and third-party inspection are available on request.

04What packing formats are available?

Drums, jumbo bags and bulk supply are available depending on grade, quantity and destination facilities.

05What Incoterms do you offer?

FOB is commonly quoted from UAE ports; CFR and CIF destination-port offers are available.

06How is Australian Standard bitumen tested?

Each batch is tested for viscosity at 60°C against the specified AS 2008 class, with results reported on its Certificate of Analysis.

FROM SPECIFICATION TO SUPPLY

Discuss your Bitumen Class 320 requirement.

Include the class or Multigrade grade, quantity, destination, specification and packing preference. Our team will revert with a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Class plus AS 2008 edition
  • Drums, jumbo bags or bulk
  • FOB, CFR or CIF
Request a quote
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote