Bitumen Class 240 or C240 is an AS 2008 Australian Standard bitumen class with a nominal viscosity of 240 Pa·s at 60°C. Bitumen Class 240 is designed for use in environments that require a higher resistance to deformation, especially under heavy traffic and in regions with warmer climates.
The main applications of Bitumen Class 240 focus on projects requiring a high resistance to deformation and durability under heavy loads. This high-viscosity grade is ideal for use in regions with warmer climates and in areas that experience heavy traffic and industrial use.
Bitumen Class 240 is supplied to AS 2008-2013, with viscosity at 60 °C tested to ASTM D2171 and penetration to ASTM D5.
Share the class, AS 2008 edition and road-authority requirements your project names and our team will confirm the fit and the supply arrangement.
Identity
Standard
AS 2008-2013
Viscosity at 60 °C
190–280 Pa.s
Penetration
53 (0.1 mm) min
Australian Standard bitumen · AS 2008-2013Why Bitumen Class 240
AS 2008 classes and multigradeClass 50 to 600 viscosity binders and M500 and M600 Multigrade, quoted to the AS 2008 edition in your project documents.
Every batch testedEach batch is tested for viscosity at 60°C against the specified AS 2008 class, with results reported on its Certificate of Analysis.
Full shipping documentationA Certificate of Analysis travels with every shipment. Certificate of Origin and MSDS are arranged on request.
UAE load portsLoading from UAE ports with FOB as standard; CFR and CIF destination-port offers are quoted on request.
Packed for your siteNew steel drums for containerised supply, jumbo bags for compatible grades, or heated bulk by vessel and tanker.
Trade risk handledThe Nuroil team manages transport, insurance, logistics and foreign-currency payments, and can discuss financing options with overseas buyers.
What Nuroil does on every order
Why source Bitumen Class 240 from Nuroil?
Tested against your class
Viscosity at 60 °C on every batch, against the specified AS 2008 class, reported on the Certificate of Analysis.
Class or multigrade, as specified
Share the AS 2008 edition and road-authority requirements; standard classes and Multigrade are not interchangeable.
Drum to bulk
New steel drums, jumbo bags, tanker vessel or tank container, matched to your receiving facilities.
FOB, CFR or CIF
FOB from UAE ports; CFR and CIF destination-port offers on request.
02 TECHNICAL DATA
Catalogue specification.
Viscosity at 60 °C
190–280 Pa.sASTM D2171
Viscosity at 135 °C
0.32–0.55 Pa.sASTM D2170
Penetration at 25 °C, 100 g, 5 s
53 (0.1 mm) minASTM D5
Flash point, Cleveland open cup
250 °C minASTM D92
Matter insoluble in toluene
1.0% wt maxASTM D4072
Viscosity of residue at 60 °C, after thin-film oven test
300% of original maxASTM D2171
Bitumen Class 240 beside the grades nearest to it. Higher class numbers mean higher viscosity at 60 °C; multigrade specifications are not published online, so confirm them with the offer.
Property
Class 170
Class 240This page
Class 320
Class 450
Type
AS 2008 class
AS 2008 class
AS 2008 class
AS 2008 class
Viscosity at 60 °C
140–200 Pa.s
190–280 Pa.s
260–380 Pa.s
Report
Viscosity at 135 °C
0.25–0.45 Pa.s
0.32–0.55 Pa.s
0.4–0.65 Pa.s
0.7 Pa.s max
Penetration at 25 °C
62 (0.1 mm) min
53 (0.1 mm) min
40 (0.1 mm) min
Report
Flash point
250 °C min
250 °C min
250 °C min
250 °C min
Typical use
General road construction and surface dressing
High-traffic and industrial roads in warm climates
Highways and heavy-load areas in warm climates
Highways, freeways and industrial roads
03 APPLICATIONS
Where it is used.
01
High-traffic roads and highways
Used for major highways, expressways, and freeways that endure constant heavy traffic. Its high viscosity ensures resistance to rutting and deformation caused by large volumes of vehicles.
02
Industrial roads
Ideal for industrial areas, ports, and logistics hubs where the pavements are exposed to heavy loads from trucks, machinery, and frequent movement of cargo.
03
Warm climate regions
Suitable for regions with high temperatures, where softer grades of bitumen might lose integrity and deform. Class 240 remains stable in hot weather, preventing softening and rutting.
04
Airport runways and taxiways
Applied in airport infrastructure, such as runways, taxiways, and aprons, where the pavement must support the weight and impact of aircraft. The bitumen ensures stability and prevents surface deformation.
05
Heavy-duty pavements
Used in truck stops, loading bays, and freight terminals, where heavy vehicles and constant stopping, turning, and loading can stress the pavement. Class 240 ensures durability under these high-stress conditions.
06
Roundabouts and intersections
Applied in areas like roundabouts and intersections, which experience concentrated traffic stress from vehicles braking, accelerating, and turning, increasing the risk of surface damage.
04 SAFETY & HANDLING
Not classified cold. Handled hot, with care.
Australian Standard bitumen is not classified as hazardous under GHS according to its Safety Data Sheet. It is stored, pumped and loaded hot, and the SDS for the offered grade decides; review it before first handling.
Not classified
GHS Not classified according to the SDS. Check the SDS for the offered grade.
Hot product Handled hot: contact causes severe burns, and hydrogen sulphide can collect in tank headspace. Per SDS.
UN
UN 3257 when shipped hot, per SDS
Transport
Elevated temperature liquid, Class 9, when hot · per SDS
01
Hot product burns
Contact with hot bitumen causes severe burns. Wear heat-resistant gloves, face protection and covering clothing when handling it hot.
02
Hydrogen sulphide in the headspace
H₂S can collect in the headspace of heated tanks and tankers. Ventilate and test the atmosphere before opening or entry, per SDS.
03
Avoid overheating
Prolonged excessive heat accelerates ageing before application. Use the storage and application range appropriate to the class.
04
Follow the SDS
Classification, first aid and fire-fighting measures are on the Safety Data Sheet for the offered grade.
Plan heating and handling.
Before it arrivesHeating and receiving confirmed
Confirm heating, storage and handling requirements for your class and packing format before shipment arrives. Bulk supply requires suitable heated tanks, pumps and transfer equipment.
Class temperatureUse the storage and application range appropriate to the selected class.
Confirm product typeStandard AS 2008 classes and Multigrade are not interchangeable.
Avoid overheatingProlonged excessive heat accelerates ageing before application.
Receiving facilitiesBulk supply requires suitable heated tanks, pumps and transfer equipment.
Standards and test methods.
HS code2713.20
Transport, coldSolid state
Transport, hotUN 3257
AS 2008-2013
Australian standard for residual pavement bitumen, the edition this grade’s page cites
ASTM D2171 / ASTM D2170
Viscosity at 60 °C and at 135 °C
ASTM D5 / ASTM D92 / ASTM D4072
Penetration, flash point and matter insoluble in toluene
ASTM D1754
Thin-film oven residue
State and territory road specifications
May add local requirements to AS 2008; confirm the exact standard, class and edition before ordering
05 PACKING OPTIONS
Drums, jumbo bags or bulk.
Packing availability is confirmed for Bitumen Class 240 and the offered source. Container loads in the planner are typical planning figures; the offer confirms them.
Small quantities
Drums
New steel drums of 200, 180 or 156 kg, or customised, palletised for containerised supply.
Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.
720 ft containers
drums
556
Last 20 ft container
94% full
Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
BulkTanker vessel or tank containerPer vessel hold capacity, confirmed at booking
DocumentsCoA with every batchSDS and Certificate of Origin on request
06 BEFORE YOU ORDER
Frequently asked questions.
01What does “Class 240” mean under AS 2008?
It identifies the class by its nominal viscosity at 60°C in Pa·s. Bitumen Class 240 should always be specified directly as its AS 2008 class rather than converted from another system.
02Is an AS 2008 class the same as an international grade?
It may be broadly comparable, but AS 2008 has its own boundaries and test methods. Do not assume direct interchangeability.
03What documents come with each shipment?
Every shipment includes a Certificate of Analysis. Certificate of Origin, MSDS and third-party inspection are available on request.
04What packing formats are available?
Drums, jumbo bags and bulk supply are available depending on grade, quantity and destination facilities.
05What Incoterms do you offer?
FOB is commonly quoted from UAE ports; CFR and CIF destination-port offers are available.
06How is Australian Standard bitumen tested?
Each batch is tested for viscosity at 60°C against the specified AS 2008 class, with results reported on its Certificate of Analysis.
Include the class or Multigrade grade, quantity, destination, specification and packing preference. Our team will revert with a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.