Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / BASE OIL / GROUP III / 8 CST

8 cSt.Group III base oil.

The highest-viscosity grade in this Group III range, alongside 4 cSt and 6 cSt.

  • 7.6–8.2 cSt at 100 °C
  • VI 120 min
  • Flash point 220 °C min
  • Severely hydrocracked
Water-clear Group III base oil sample, steel drum and hydrocracking refinery in pencil style
GroupIII · severely hydrocrackedVI 120 min
8 cStKV100 7.6–8.2 cStThe heaviest Group III grade
HazardNot classifiedUN Not regulated
KV at 40 °C43.8–50.1 cSt
KV at 100 °C7.6–8.2 cSt
Viscosity index120 min
Flash point220 °C min
Pour point−12 °C max
Switch gradeThe Group III grades
Compare Group III
01 THE GRADE

What is 8 cSt?

The highest-viscosity grade in this Group III range, alongside 4 cSt and 6 cSt.

Group III is made by severe hydrocracking and hydro-isomerisation: a catalyst restructures wax into branched iso-paraffins instead of simply removing it. The result is a viscosity index of at least 120 and strong oxidation stability.

Share your application, target viscosity and additive system and our team will confirm the fit and the supply arrangement.

Identity
Group
III · severely hydrocracked
KV100
7.6–8.2 cSt
VI
120 min
Group III base oil · hydrocracked and hydro-isomerised
Why 8 cSt
  • Highest oxidation stability of the petroleum groupsSupports longer service life and drain intervals.
  • High viscosity indexHolds viscosity more steadily across hot and cold operation.
  • Lower volatilityCan reduce oil consumption in high-temperature service.
  • Synthetic-market positioningThe base stock behind most full-synthetic commercial lubricants.
  • Extreme-service fitSupports premium engine and demanding industrial formulations.
What Nuroil does on every order

Why choose 8 cSt from Nuroil?

  • Checked against the batch CoA

    Every shipment carries a Certificate of Analysis confirming the key grade properties.

  • Grade matched to your formulation

    Share your application, target viscosity and additive system and we confirm the fit.

  • Drum to bulk

    Drums, IBCs, flexitanks and road tanker or bulk, sized to your consumption.

  • One desk, firm offers

    FOB Jebel Ali, Port Khalid or Hamriyah; CFR and CIF on request, usually within 24 hours.

02 TECHNICAL DATA

Catalogue specification.

Kinematic viscosity at 100 °C
7.6–8.2 cStASTM D445
Kinematic viscosity at 40 °C
43.8–50.1 cStASTM D445
Viscosity index (VI)
120 minASTM D2270
Flash point
220 °C minASTM D92
Sulphur content
0.001 wt%ASTM D2622
Pour point
−12 °C maxASTM D97
03 HOW IT IS MADE

Severe hydrocracking and isodewaxing.

High pressure and temperature maximise saturates and remove sulphur-bearing compounds; a specialised catalyst then restructures wax into branched iso-paraffins. Hydro-isomerisation is the defining extra step and the source of Group III's price premium.

  1. 01

    Vacuum distillation

    Petroleum fractions are separated by boiling range

  2. 02

    Hydrocracking and isodewaxing

    Severe hydrocracking, then wax turned into iso-paraffins

  3. 03

    Finishing

    The oil is finished for colour and stability

  4. 04

    Testing

    Each batch is tested against the grade specification

Crude oilFurnaceVacuumH₂Base oilDrums · bulk01Vacuumdistillation02Hydrocracking andisodewaxing03Finishing04Testing
04 APPLICATIONS

Where it is used.

05 SAFETY & HANDLING

Generally not classified. Handle it cleanly.

Base oils are generally not classified as hazardous. The Safety Data Sheet for the offered grade decides; review it before first handling.

Not classified
  • GHS Base oils are generally not classified as hazardous. Check the SDS for the offered grade.
UN
Not regulated
Transport
Not dangerous goods, per SDS
  1. 01
    Follow the SDS

    Classification, first aid and fire-fighting measures are on the Safety Data Sheet for the offered grade.

  2. 02
    Wear suitable PPE

    Use appropriate protective equipment during transfer, sampling and spill response.

  3. 03
    Contain spills

    Absorb spilt oil and keep it out of drains and watercourses.

  4. 04
    Keep it clean

    Use closed, clean equipment so the oil stays free of water and other products.

Clean, dry and closed.
Keep itClean, dry and closed

Use closed, clean tanks and protect the oil from moisture and contamination. The batch CoA records the delivered quality.

  • Keep it dryClosed, clean tanks; protect the oil from moisture and contamination.
  • Separate gradesDedicate or thoroughly clean lines, pumps and tanks before grade changes.
  • Control temperatureAvoid direct sunlight and extreme temperature changes during storage.
  • Confirm the formulationVery low sulphur supports broad seal compatibility; verify the full additive package when switching from Group I or II.
Standards and regulatory reference.
  • HS code2710.19
  • TransportNot regulated
API Base Oil Interchange Guidelines
Defines Group III by saturates, sulphur and viscosity index
ASTM D445 / D2270
Kinematic viscosity and viscosity index
ASTM D92 / D97
Flash point and pour point
ASTM D2622
Sulphur content
NSF H1 registration
Required when the finished lubricant is intended for incidental food contact
REACH (EU)
Chemical registration requirements for relevant imports into the EU
Destination regulations
National chemical and commodity import rules vary by market
06 PACKING OPTIONS

Drum, IBC, flexitank or bulk.

Packing availability is confirmed for 8 cSt and the offered origin. Container loads in the planner are typical planning figures; the offer confirms them.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

720 ft containers
drums
556
Last 20 ft container
94% full
  • Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
  • OfferWithin 24 hoursGrade, viscosity target, quantity, packing and destination
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
07 BEFORE YOU ORDER

Frequently asked questions.

01What is 8 cSt base oil used for?

The highest-viscosity grade in this Group III range, alongside 4 cSt and 6 cSt. Tell us your application, target viscosity and additive system and we will confirm the fit.

02Can I download the 8 cSt specification?

Yes. The technical data sheet and the specification sheet are available as PDF downloads on this page.

03Is Group III base oil actually synthetic?

It is petroleum-derived rather than chemically synthesised like Group IV PAO, but it is commonly marketed as synthetic because severe processing produces comparable performance.

04What do 4 cSt, 6 cSt and 8 cSt mean?

They refer to approximate kinematic viscosity at 100 °C in centistokes, unlike the SN or N naming commonly used for Groups I and II.

05What documents come with each shipment?

Every shipment includes a Certificate of Analysis confirming key grade properties. Certificate of Origin, SDS and third-party inspection reports are available on request.

06What packing formats are available?

Drums, IBCs, flexitanks and road tanker or bulk shipment. Availability depends on the grade, quantity and receiving facilities.

07What Incoterms do you offer?

FOB is our standard quoted term from Jebel Ali, Port Khalid and Sharjah Hamriyah. CFR and CIF offers to your destination port are available on request.

08What is the minimum order quantity?

MOQ depends on the grade and packing format. Share your requirement and we will confirm feasibility with your quote.

FROM SPECIFICATION TO SUPPLY

Discuss your 8 cSt requirement.

Share the grade, viscosity target, quantity, packing and destination. Our team replies with the offer within 24 hours. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Grade and viscosity target
  • Drums, IBCs, flexitank or bulk
  • FOB, CFR or CIF
Request a quote
FROM THE KNOWLEDGE CENTRE

Guides & articles

Written by our trade desk to help you specify, compare and buy with confidence.

All guides & articles
ArticleLubricants · 1 minAbout bright stock

Bright Stock refers to lube base oils of high viscosity produced by atmospheric distillation and vacuum distillation, then…

Read
ArticleLubricants · 1 minWhat is automotive gear oil?

Automotive gear oil can be broadly divided into Manual & Automatic Transmission Oil and Differential Gear Oil. LSD gear oil is a…

Read
ArticleLubricants · 2 minClassification of industrial gear oils

The most extensively referenced industrial oil classification is the one established by ANSI/AGMA (American National Standard…

Read
GuideLubricants · 3 minBase oil grades and specifications explained

A reference to API base oil groups, common grade names such as SN150 and SN500, the tests on a base oil certificate and typical…

Read
GuideLubricants · 3 minBase oil storage, handling and contamination control

How to keep base oil on specification from receipt to blending: drum and tank storage, water and dirt control, dispensing and…

Read
GuideLubricants · 3 minPacking options for base oil

Drums, IBCs, flexitanks, ISO tanks and bulk vessels for base oil: how they compare on volume, handling, contamination risk and…

Read
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote