Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / BASE OIL / GROUP II / N 70

N 70.Group II base oil.

The lowest-viscosity Group II neutral grade, for lighter industrial and hydraulic fluids.

  • Group II
  • Hydrocracked
  • Neutral base oil
  • Data sheet on request
Clear Group II base oil sample, steel drum and hydrocracking refinery in pencil style
GroupII · hydrocrackedData TDS on request
N 70TDS on requestThe lightest Group II neutral
HazardNot classifiedUN Not regulated
API groupGroup II
RefiningHydrocracked
Group II VI80–120
Saturates90% min
Sulphur0.03% max
Switch gradeThe Group II grades
Compare Group II
01 THE GRADE

What is N 70?

The lowest-viscosity Group II neutral grade, for lighter industrial and hydraulic fluids.

Group II is produced by hydrocracking vacuum-distilled petroleum fractions with hydrogen, heat and a catalyst. High saturates and low sulphur give better oxidation stability, clearer colour and lower odour than Group I.

Share your application, target viscosity and additive system and our team will confirm the fit and the supply arrangement.

Identity
Group
II · hydrocracked
Grade
Neutral base oil
Data
TDS on request
Group II base oil · hydrocracked mineral oil
Why N 70
  • Better oxidation stabilityResists breakdown under heat and oxygen more effectively than Group I.
  • Low sulphurSupports emissions-conscious modern engine oil formulation.
  • Clear, low-odour appearanceImproves how the finished product looks and smells.
  • Reliable global availabilityA current volume leader with competitive mid-market pricing.
  • Modern formulation fitWell suited to conventional and semi-synthetic engine oils.
What Nuroil does on every order

Why choose N 70 from Nuroil?

  • Checked against the batch CoA

    Every shipment carries a Certificate of Analysis confirming the key grade properties.

  • Grade matched to your formulation

    Share your application, target viscosity and additive system and we confirm the fit.

  • Drum to bulk

    Drums, IBCs, flexitanks and road tanker or bulk, sized to your consumption.

  • One desk, firm offers

    FOB Jebel Ali, Port Khalid or Hamriyah; CFR and CIF on request, usually within 24 hours.

02 TECHNICAL DATA

Specification on request.

Kinematic viscosity at 40 °C and 100 °C
On requestPer data sheet
Viscosity index (VI)
On requestPer data sheet
Flash point
On requestPer data sheet
Pour point
On requestPer data sheet
Sulphur content
On requestPer data sheet
Density at 15 °C
On requestPer data sheet
Colour
On requestPer data sheet
03 HOW IT IS MADE

Hydro- processing.

Group II is produced by hydrocracking vacuum-distilled petroleum fractions with hydrogen, heat and a catalyst, then dewaxed, finished and tested.

  1. 01

    Vacuum distillation

    Petroleum fractions are separated by boiling range

  2. 02

    Hydrocracking and dewaxing

    Hydrogen, heat and a catalyst remove sulphur and wax

  3. 03

    Finishing

    The oil is finished for colour and stability

  4. 04

    Testing

    Each batch is tested against the grade specification

Crude oilFurnaceVacuumH₂Base oilDrums · bulk01Vacuumdistillation02Hydrocracking anddewaxing03Finishing04Testing
04 APPLICATIONS

Where it is used.

05 SAFETY & HANDLING

Generally not classified. Handle it cleanly.

Base oils are generally not classified as hazardous. The Safety Data Sheet for the offered grade decides; review it before first handling.

Not classified
  • GHS Base oils are generally not classified as hazardous. Check the SDS for the offered grade.
UN
Not regulated
Transport
Not dangerous goods, per SDS
  1. 01
    Follow the SDS

    Classification, first aid and fire-fighting measures are on the Safety Data Sheet for the offered grade.

  2. 02
    Wear suitable PPE

    Use appropriate protective equipment during transfer, sampling and spill response.

  3. 03
    Contain spills

    Absorb spilt oil and keep it out of drains and watercourses.

  4. 04
    Keep it clean

    Use closed, clean equipment so the oil stays free of water and other products.

Clean, dry and closed.
Keep itClean, dry and closed

Use closed, clean tanks and protect the oil from moisture and contamination. The batch CoA records the delivered quality.

  • Keep it dryClosed, clean tanks; protect the oil from moisture and contamination.
  • Separate gradesDedicate or thoroughly clean lines, pumps and tanks before grade changes.
  • Control temperatureAvoid direct sunlight and extreme temperature changes during storage.
  • Check older sealsWhen reformulating from Group I, confirm compatibility with seals designed around higher-sulphur stock.
Standards and regulatory reference.
  • HS code2710.19
  • TransportNot regulated
API Base Oil Interchange Guidelines
Defines Group II by saturates, sulphur and viscosity index
Technical data sheet
Properties, units and test methods, sent on request
REACH (EU)
Chemical registration requirements for relevant imports into the EU
Destination regulations
National chemical and commodity import rules vary by market
06 PACKING OPTIONS

Drum, IBC, flexitank or bulk.

Packing availability is confirmed for N 70 and the offered origin. Container loads in the planner are typical planning figures; the offer confirms them.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

720 ft containers
drums
556
Last 20 ft container
94% full
  • Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
  • OfferWithin 24 hoursGrade, viscosity target, quantity, packing and destination
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
07 BEFORE YOU ORDER

Frequently asked questions.

01What is N 70 base oil used for?

The lowest-viscosity Group II neutral grade, for lighter industrial and hydraulic fluids. Tell us your application, target viscosity and additive system and we will confirm the fit.

02Can I download the N 70 specification?

The published values are being prepared. Request the technical data sheet with your enquiry and we will send the current specification.

03What is Group II base oil?

Group II is a hydrocracked mineral base oil with at least 90% saturates, no more than 0.03% sulphur and improved oxidation stability.

04What is the difference between Group II and Group I?

Group II is hydrocracked, giving it higher saturates, lower sulphur and better oxidation stability than solvent-refined Group I.

05What documents come with each shipment?

Every shipment includes a Certificate of Analysis confirming key grade properties. Certificate of Origin, SDS and third-party inspection reports are available on request.

06What packing formats are available?

Drums, IBCs, flexitanks and road tanker or bulk shipment. Availability depends on the grade, quantity and receiving facilities.

07What Incoterms do you offer?

FOB is our standard quoted term from Jebel Ali, Port Khalid and Sharjah Hamriyah. CFR and CIF offers to your destination port are available on request.

08What is the minimum order quantity?

MOQ depends on the grade and packing format. Share your requirement and we will confirm feasibility with your quote.

FROM SPECIFICATION TO SUPPLY

Discuss your N 70 requirement.

Share the grade, viscosity target, quantity, packing and destination. Our team replies with the offer within 24 hours. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Grade and viscosity target
  • Drums, IBCs, flexitank or bulk
  • FOB, CFR or CIF
Request a quote
FROM THE KNOWLEDGE CENTRE

Guides & articles

Written by our trade desk to help you specify, compare and buy with confidence.

All guides & articles
ArticleLubricants · 1 minAbout bright stock

Bright Stock refers to lube base oils of high viscosity produced by atmospheric distillation and vacuum distillation, then…

Read
ArticleLubricants · 1 minWhat is automotive gear oil?

Automotive gear oil can be broadly divided into Manual & Automatic Transmission Oil and Differential Gear Oil. LSD gear oil is a…

Read
ArticleLubricants · 2 minClassification of industrial gear oils

The most extensively referenced industrial oil classification is the one established by ANSI/AGMA (American National Standard…

Read
GuideLubricants · 3 minBase oil grades and specifications explained

A reference to API base oil groups, common grade names such as SN150 and SN500, the tests on a base oil certificate and typical…

Read
GuideLubricants · 3 minBase oil storage, handling and contamination control

How to keep base oil on specification from receipt to blending: drum and tank storage, water and dirt control, dispensing and…

Read
GuideLubricants · 3 minPacking options for base oil

Drums, IBCs, flexitanks, ISO tanks and bulk vessels for base oil: how they compare on volume, handling, contamination risk and…

Read
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote