A naturally occurring solid hydrocarbon used as a performance additive in ink, paint, foundry sand, drilling fluid and asphalt modification, not as a primary paving binder.
Grade, specification and delivery confirmed for your requirement, from Nuroil Trading in Sharjah.
Lump or screened powder
Irregular lump for buyers with crushing facilities, or screened powder with a controlled mesh size for direct formulation use.
Batch Certificate of Analysis
Each batch is supplied with a Certificate of Analysis for the properties critical to your application.
Containerised supply
Packing and loading are planned around your volume and destination, in bulk bags or powder bags.
02 / THE MATERIAL
What is natural gilsonite?
IN SHORT
Gilsonite is a hard, brittle, glossy black-to-dark-brown asphaltite formed naturally underground over geological time. Unlike every petroleum-derived binder family, it is extracted by mining.
Material
Natural asphaltite
Origin
Uinta Basin, Utah, USA
Form
Lump or screened powder
Softening point
180 – 205 °C
03 / READING THE GRADES
Reading the specification.
Typical commercial values. They vary meaningfully by deposit and grade; confirm the specific batch Certificate of Analysis.
01
Softening point 180 – 205 °C
Ring and ball, ASTM D36: far higher than conventional paving bitumen, with penetration 0.0 (0.1 mm) at 25 °C.
02
Ash 2.0 – 10.0% wt
ASTM D3174: commercial grades are valued for controlled mineral content.
03
Solubility in CS₂ 81.0% wt
ASTM D4, with normal heptane insolubles of 79.0% wt (ASTM D3279).
04
Lump or screened powder
Form by visual and sieve analysis; powder is classified to the agreed mesh range.
04 / STRENGTHS & LIMITS
Strengths and limits of natural bitumen.
What it tells you
Thermal performance: a high softening point supports heat-resistant formulations.
Strong colour: deep black pigmentation suits ink, paint and coatings.
Binder enhancement: it can improve hardness, adhesion and resistance in compatible systems.
Flexible sizing: lump or controlled powder mesh supports different production routes.
What it does not tell you
It is not a standalone paving binder: its high softening point and brittleness suit it to blending with petroleum bitumen.
It is not universally compatible: it is soluble in aromatic solvents, so confirm the solvent system.
Properties are not fixed: they vary by deposit and grade, so check the batch CoA against the formulation.
The dosage is not set by the specification: validate addition rate, dispersion and performance at formulation scale.
05 / FULL COMPARISON
Catalogue specifications.
Typical commercial values, with the elemental analysis. Values vary meaningfully by deposit and grade; the batch Certificate of Analysis decides.
Technical data sheet · Typical values
Natural bitumen (Gilsonite)
NUR-BT-GILNatural asphaltite · lump or powder
Ash content
2.0 – 10.0% wtASTM D3174
Moisture content
1.0 – 3.0% wtASTM D3173
Volatile matter
63.0% wtASTM D3175
Fixed carbon
29.0% wtASTM D3172
Solubility in CS₂
81.0% wtASTM D4
Specific gravity at 25 °C
1.01 – 1.06ASTM D3289
Normal heptane insolubles
79.0% wtASTM D3279
Colour in mass
Black
Colour in streak or powder
Brown
Softening point
180 – 205 °CASTM D36
Penetration at 25 °C
0.0 (0.1 mm)ASTM D5
Form
Lump or screened powderVisual / sieve analysis
Carbon
74.0% wtASTM D5291
Hydrogen
9.1% wtASTM D5291
Nitrogen
1.67% wtASTM D5291
Oxygen
3.1% wtASTM D5291
Sulphur
0.5% wtLeco (S) analyser
Typical commercial values; they vary by deposit and grade. The Certificate of Analysis for the offered batch decides.
Share the target application and critical properties so the supply can be matched to your process.
01
Requirement
Crushing facilities on site
Lump in bulk bags
Irregular material for buyers with crushing facilities.
02
Requirement
Direct formulation use
Screened powder
Controlled mesh size for direct formulation use.
03
Requirement
Ink, paint and coatings
Gilsonite as an additive
Deep colour, gloss and hardness for black ink, paint and coating formulations.
04
Requirement
Asphalt modification
Blended into petroleum bitumen
Increases high-temperature stiffness.
07 / APPLICATIONS
Made for the work your operation does.
Match the product to the crop, equipment or process and confirm the specification before you order.
01
Ink and paint
Deep colour, gloss and hardness for black ink, paint and coating formulations.
02
Foundry sand
Carbonaceous additive supporting mould release and casting-surface quality.
03
Drilling fluid
Fluid-loss and borehole-stability additive in compatible oilfield formulations.
04
Asphalt modification
Blended into petroleum bitumen to increase high-temperature stiffness.
05
Rubber and plastics
Performance filler or modifier in selected compound systems.
08 / HOW IT IS MADE
Where gilsonite comes from.
Ancient hydrocarbon-rich material migrated through sedimentary rock and solidified within narrow, near-vertical veins. Mining follows those veins before the material is sorted, crushed and screened.
01
Natural deposit
Asphaltite solidifies in underground rock veins.
02
Mine
The solid material is mechanically extracted.
03
Sort and crush
Lumps are cleaned and reduced to the required size.
04
Screen
Powder is classified to the agreed mesh range.
09 / COMPATIBILITY & HANDLING
Prepare the formulation.
Confirm the solvent system, dust controls and dosage for your process before the shipment arrives.
01
Confirm solvent system
Gilsonite is soluble in aromatic solvents but not universally compatible.
02
Control dust
Powder handling requires suitable extraction and respiratory precautions.
03
Trial the dosage
Validate addition rate, dispersion and performance at formulation scale.
04
Protect from moisture
Store bags closed and dry to preserve consistent feeding.
10 / REFERENCE METHODS
Quality and test methods.
Batch results for softening point, ash, moisture and other agreed properties are reported on the Certificate of Analysis.
01
ASTM D3174 / D3173
Ash and moisture content
02
ASTM D3175 / D3172
Volatile matter and fixed carbon
03
ASTM D4 / D3279
Solubility in CS₂ and normal heptane insolubles
04
ASTM D36 / D5
Softening point and penetration
05
ASTM D3289 / D5291
Specific gravity and elemental analysis
06
Mesh confirmation
Sieve range confirmed for screened powder orders
11 / PACKING & DELIVERY
Packing formats.
Availability depends on the product, quantity and receiving facilities. Confirm the arrangement for your order.
01 / IRREGULAR LUMP
Lump in bulk bags
Irregular material for buyers with crushing facilities.
No. Gilsonite is naturally occurring asphaltite mined from underground deposits, not refined from crude oil. It is primarily an additive rather than a standalone paving binder.
02Where does Gilsonite come from?
It occurs in natural asphaltite veins in sedimentary rock; significant commercial deposits are associated with the Uinta Basin in Utah, USA.
03Can Gilsonite be used for paving on its own?
Not typically. Its high softening point and brittleness make it better suited as an additive to conventional petroleum bitumen.
04What industries use Gilsonite?
Ink and paint, foundry, oil and gas drilling fluid, asphalt modification, and rubber or plastics processing.
05What forms are supplied?
Irregular lump for on-site crushing and screened powder produced to an agreed mesh size.
06What documents come with each shipment?
Every shipment includes a Certificate of Analysis. Certificate of Origin and MSDS are available on request.
07What Incoterms do you offer?
FOB is commonly quoted from UAE ports; CFR and CIF destination-port offers are available.
08Does the softening point vary between batches?
Properties vary by source deposit and grade, so the batch Certificate of Analysis should always be checked against the formulation.