Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / BITUMEN / EMULSIONS / K2

Emulsion K2.For dust control.

Bitumen emulsion K2 is a type of cationic bitumen emulsion used primarily in road construction and maintenance applications.

  • Cationic · medium setting
  • Binder content 57% min
  • KS 02-769 · BS 434-2
Pencil sketch of steel drums for bitumen emulsion supply
ChargeCationicStandard KS 02-769 · BS 434-2
K2Cationic · medium settingTack coats, prime coats and cold mix
HazardPer SDSUN Not regulated for transport, typically · per SDS
ChargeCationic
SettingMedium setting
Binder content57% min
Viscosity, Engler degrees at 20 °C10 °E max
StandardKS 02-769 · BS 434-2
Switch gradeThe emulsion grades
Compare the emulsion grades
01 THE GRADE

What is Bitumen emulsion K2?

Bitumen emulsion K2 is a type of cationic bitumen emulsion used primarily in road construction and maintenance applications. It is essential for enhancing the performance and longevity of road surfaces, making it widely used in both new construction and maintenance activities.

Bitumen emulsion K2 is used in various road construction and maintenance applications due to its advantageous properties.

Bitumen emulsion K2 is specified to the Kenyan standard KS 02-769 and the British standard BS 434-2, with its limits tested by ASTM methods.

Share the grade, standard and application your project names and our team will confirm the fit and the supply arrangement.

Identity
Charge
Cationic
Setting
Medium setting
Standard
KS 02-769 · BS 434-2
Bitumen emulsion · cationic · KS 02-769 · BS 434-2
Why Bitumen emulsion K2
  • Rapid, medium and slow settingRapid, medium and slow-setting grades so the breaking speed matches tack coats, surface dressing, cold mix or slurry work.
  • Water, not solventEmulsions carry the bitumen in water rather than petroleum solvent, for cold application without heating equipment.
  • Full shipping documentationA Certificate of Analysis travels with every shipment. Certificate of Origin and MSDS are arranged on request.
  • UAE load portsLoading from UAE ports with FOB as standard; CFR and CIF destination-port offers are quoted on request.
  • Packed for your siteNew steel drums for containerised supply, or bulk tanker for large-volume receivers with compatible tanks.
  • Trade risk handledThe Nuroil team manages transport, insurance, logistics and foreign-currency payments, and can discuss financing options with overseas buyers.
What Nuroil does on every order

Why source Bitumen emulsion K2 from Nuroil?

  • Tested against your grade

    Each batch is reported against the specified grade limits on the Certificate of Analysis.

  • The standard you name

    ASTM D2397, ASTM D977, SANS 4001 or BS 434-2 grades; share the designation your project names.

  • Drum to bulk

    Steel drums, IBC tanks or bulk tanker, matched to your receiving facilities.

  • FOB, CFR or CIF

    FOB from UAE ports; CFR and CIF destination-port offers on request.

02 TECHNICAL DATA

Catalogue specification.

Particle charge
PositiveASTM D244
Residue on a 710 µm (No. 20) sieve
0.05% m/m maxASTM D244
Residue on a 150 µm (No. 100) sieve
0.15 g/100 ml maxASTM D244
Binder content
57% minASTM D6997
Viscosity, Engler degrees at 20 °C
10 °E maxASTM D1545
Storage stability, long period test
2% maxASTM D6930
03 APPLICATIONS

Where it is used.

04 SAFETY & HANDLING

Water-based. Handled with care.

Bitumen emulsion carries the bitumen in water, without petroleum solvent, which generally makes storage and application safer than cutback. The Safety Data Sheet for the offered grade decides; review it before first handling.

Per SDS
  • GHS Classification per the SDS for the offered grade. A cationic emulsion has an acidic pH below 7 and may irritate skin and eyes.
  • Handling Keep from freezing, which breaks the emulsion. Never mix with an anionic emulsion.
UN
Not regulated for transport, typically · per SDS
Carrier
Water · no petroleum solvent
  1. 01
    Cationic grades are acidic

    A cationic emulsion has an acidic pH below 7 and may irritate skin and eyes. Wear gloves and eye protection, per SDS.

  2. 02
    Never mix the two

    Mixing anionic and cationic emulsions lets the opposite charges attract: the bitumen separates out and both emulsions are destroyed.

  3. 03
    Prevent freezing

    Freezing can permanently break the emulsion and make it unusable.

  4. 04
    Follow the SDS

    Classification, first aid and grade-specific storage, transfer and application guidance are on the Safety Data Sheet.

Protect emulsion stability.
Shelf lifeAs the manufacturer recommends

Avoid storage beyond the manufacturer’s recommendation; separation can develop over time.

  • Prevent freezingFreezing can permanently break the emulsion and make it unusable.
  • Manage shelf lifeAvoid storage beyond the manufacturer’s recommendation; separation can develop over time.
  • Check aggregateConfirm surface charge and moisture compatibility before full-scale use.
  • Use the SDSFollow grade-specific storage, transfer and application guidance.
Standards and test methods.
  • HS code2715.00
  • TransportNot regulated
KS 02-769 · BS 434-2
Kenyan and British standards named on the grade specification
ASTM D244 · ASTM D6997 · ASTM D1545 · ASTM D6930
Charge, demulsibility and residue tests: methods referenced within the grade specification
National road authority specification
May reference an alternative national standard; confirm the exact standard, grade and edition before ordering
05 PACKING OPTIONS

Drums, IBC tanks or bulk.

Packing availability is confirmed for Bitumen emulsion K2 and the offered source. Container loads in the planner are the published planning figures; the offer confirms them.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

720 ft containers
drums
500
Last 20 ft container
25% full
  • Minimum orderBy grade and packingShare your requirement; feasibility is confirmed with the quote
  • BulkBulk tankerFor large-volume receivers with compatible tanks
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
06 BEFORE YOU ORDER

Frequently asked questions.

01What kind of emulsion is K2?

K2 is a cationic medium setting emulsion. The droplets carry a positive charge, attracting them to the typically negative surface of most aggregates and improving adhesion. It stays workable long enough to coat aggregate.

02Does a grade name establish product suitability?

No. Compare the complete offered specification with the project requirements and applicable standard.

03Can bitumen emulsion be applied to damp surfaces?

Generally yes because it is water-based, though the exact surface condition must suit the specified grade.

04What packing formats are available?

Steel drums, IBC tanks and bulk tanker; availability depends on grade, quantity and destination facilities.

05What documents come with each shipment?

Every shipment includes a Certificate of Analysis. Certificate of Origin, MSDS and third-party inspection are available on request.

06What Incoterms do you offer?

FOB is commonly quoted from UAE ports; CFR and CIF destination-port offers are available.

FROM SPECIFICATION TO SUPPLY

Discuss your Bitumen emulsion K2 requirement.

Include the grade, application, quantity, destination, specification and packing preference. Our team replies with a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Grade plus application
  • Drums, IBC tanks or bulk
  • FOB, CFR or CIF
Request a quote
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote