Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Guide3 min read6 sections

Knowledge centre · Urea & fertilizers

Urea grades compared: agricultural, feed and technical

Agricultural, feed and technical urea share one molecule but differ in purity, additives and controls. A reference for choosing the right grade.

Written by the Nuroil trade desk, Sharjah

Illustration of Nuroil urea bag and granules in a crop field
On this page · 6 sections
  1. 01Agricultural grade
  2. 02Feed grade
  3. 03Technical grade
  4. 04Can one grade replace another?
  5. 05Packing and handling across grades
  6. 06Specifying the right grade

Chemically, all urea is the same compound. In trade, however, it is sold in grades that differ in purity, additives, physical form and the controls applied during production and handling. Choosing the wrong grade can cause problems ranging from caking and crop injury to rejected cargoes or damaged emission systems. This guide compares the three main grades.

Agricultural grade

Agricultural or fertilizer-grade urea is by far the largest category; more than 90% of urea produced is used as fertilizer. It is supplied as prilled or granular product with 46% nitrogen minimum. Specifications typically limit biuret to around 1.0% and moisture to 0.5%, and most producers add a formaldehyde-based conditioner to improve hardness and reduce caking. It is used for direct application, bulk blending and as a raw material for compound fertilizers. Buyers making foliar sprays may ask for lower biuret, because biuret can scorch leaves.

Feed grade

Feed-grade urea is used as non-protein nitrogen in ruminant rations. Its value lies less in tighter chemistry than in suitability for feed: it is produced and handled for animal feed, documented for feed use, and usually conditioned or coated to flow freely so it mixes evenly into rations. Coated forms carry a little less than 46% nitrogen. Feed mills should check the product against the feed regulations in their market and store it separately from fertilizers. Safe inclusion rates are set by nutritionists, since urea is toxic if overfed.

Technical grade

Technical or industrial-grade urea is used for diesel exhaust fluid, urea-formaldehyde and melamine resins, industrial emission control and chemical processing. It is usually supplied without formaldehyde conditioner and with tighter limits on biuret, insolubles and trace metals. The most demanding application is diesel exhaust fluid, whose finished solution must meet ISO 22241, including biuret of 0.3% maximum, aldehydes of 5 mg/kg maximum and very low metal and phosphate levels. Because technical urea often lacks anti-caking conditioner, it needs especially dry storage.

FeatureAgriculturalFeedTechnical
Main useFertilizer, blendingRuminant non-protein nitrogenDEF, resins, chemicals
Nitrogen46% minNear 46%; lower if coated46% min
BiuretAround 1.0% maxPer feed specificationLow; tight for DEF use
ConditionerUsually formaldehyde-basedFlow aid or coatingUsually none
FormPrilled or granularPrilled, granular or coatedPrilled or granular, often in lined bags
Key documentsCoA, fertilizer registration where requiredCoA, feed compliance documentsCoA with extended impurity analysis

Can one grade replace another?

  • Technical for agricultural: generally possible chemically, but unconditioned urea cakes more easily and may cost more.
  • Agricultural for technical: usually not, especially for DEF, where conditioners and trace impurities can damage catalysts.
  • Agricultural for feed: not recommended. Feed use needs product produced, documented and handled for feed.
  • Feed for agricultural: possible in principle, but coated feed grades carry slightly less nitrogen and are usually priced for their feed controls.
Choose the grade by end use first; nitrogen content alone does not tell you whether urea is fit for purpose.

Packing and handling across grades

All three grades absorb moisture and should be kept dry, away from ammonium nitrate and from oxidisers such as calcium hypochlorite. Agricultural urea moves in bulk and in bags; feed and technical grades are more often bagged, frequently in jumbo bags with inner liners, to protect purity. Dedicated, clean handling equipment helps prevent cross-contamination between grades. Mixing urea with hypochlorites can produce explosive nitrogen trichloride, so the SDS segregation advice applies to every grade.

Specifying the right grade

Start your enquiry by stating the end use. Then list the grade, form, nitrogen minimum, biuret and moisture limits, conditioner requirements, any impurity limits, packing, quantity and destination. Nuroil supplies agricultural, feed and technical grades from established producers, with a CoA for every delivery and certificate of origin, SDS or independent inspection on request.

PRODUCTS IN THIS GUIDE
KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote