Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read5 sections

Knowledge centre · Urea & fertilizers

Technical-grade urea: DEF, resins and other industrial uses

Beyond fertilizer, urea feeds diesel exhaust fluid, wood-panel resins and many chemical processes. Here is why purity matters for each use.

Written by the Nuroil trade desk, Sharjah

Illustration of Nuroil technical grade urea at a chemical plant
On this page · 5 sections
  1. 01Diesel exhaust fluid (AUS 32)
  2. 02Urea-formaldehyde and melamine resins
  3. 03Other industrial uses
  4. 04Handling technical urea
  5. 05What to specify in an enquiry

Most of the world's urea goes onto fields as fertilizer, but a significant share is used as an industrial raw material. These applications usually ask more of the product than agriculture does. Low impurities, controlled biuret and the absence of certain additives can matter as much as nitrogen content. This article outlines the main technical uses and what each one needs.

Diesel exhaust fluid (AUS 32)

Modern diesel trucks, buses, off-road machinery and many marine and stationary engines use selective catalytic reduction (SCR) to cut nitrogen oxide emissions. They inject a solution of urea in water into the exhaust, where it breaks down to ammonia, and a catalyst then converts nitrogen oxides into nitrogen and water.

The solution, known as diesel exhaust fluid (DEF) or AUS 32 and sold under several trade names, is 32.5% high-purity urea in deionised water. Its quality is set by ISO 22241. Supplier data sheets for this standard show tight limits, including:

  • Urea content between 31.8% and 33.2% by mass.
  • Biuret no more than 0.3%.
  • Aldehydes no more than 5 mg/kg.
  • Very low trace metals and phosphate, typically below 0.5 mg/kg for several elements.

The reason is the catalyst. Metals such as calcium and compounds such as phosphate leave deposits that poison or block it, so DEF producers need urea made without formaldehyde conditioners and with very low contaminants. Ordinary fertilizer urea is not suitable. DEF also freezes at about −11 °C and starts to decompose at around 60 °C, which affects how it is stored.

Urea-formaldehyde and melamine resins

Urea reacts with formaldehyde to form urea-formaldehyde (UF) resins, the main adhesive in particleboard, medium-density fibreboard and interior plywood. Related resins that include melamine (itself made from urea) give better moisture resistance. UF resins are also used to give textiles wrinkle and shrink resistance and in some coatings. Resin makers typically look for consistent purity, low biuret and low free ammonia so that reactions run predictably.

Other industrial uses

  • Industrial NOx control: power plants and industrial boilers use urea-based reagents in SCR and non-catalytic reduction systems.
  • Chemical intermediate: urea is a raw material for melamine and for various other chemicals.
  • Fermentation: a nitrogen source for yeast in ethanol and other fermentation processes.
  • Textiles and dyeing: as an additive in dye baths and printing pastes.
  • De-icing: used on some surfaces where chloride salts are not wanted.
  • Cosmetics and pharmaceuticals: in moisturising products, using specially refined grades.
UseKey quality concerns
Diesel exhaust fluidBiuret, aldehydes, trace metals, insolubles; no formaldehyde conditioner
UF and melamine resinsPurity, biuret, free ammonia, consistent quality
Industrial NOx reductionPurity and insolubles suited to the injection system
Fermentation and process usePurity and freedom from contaminants for the process
For technical uses, specify what must be absent from the urea as carefully as the nitrogen it contains.

Handling technical urea

Technical urea is often supplied uncoated and without anti-caking conditioner, so it is more prone to caking than fertilizer grades. It should be kept in sealed, lined bags or clean, dry silos, away from humidity and contamination. Equipment for DEF production should be stainless steel or suitable plastics, since urea solutions attack some metals such as aluminium, and should be dedicated to avoid pick-up of trace metals.

What to specify in an enquiry

State the end use, because that drives the specification. For DEF production, ask for urea suitable for AUS 32 manufacture and list the limits you need for biuret, aldehydes, formaldehyde, insolubles and key metals. For resins, state nitrogen, biuret, free ammonia and moisture. Include form, packing (often lined jumbo bags) and destination. Request a certificate of analysis per lot and SDS; third-party inspection is advisable for critical uses. Nuroil supplies technical and industrial grade urea from established producers. Send your specification through our quote form.

PRODUCTS IN THIS ARTICLE
KEEP READING

More from the knowledge centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote