Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read5 sections

Knowledge centre · Urea & fertilizers

Treating straw with feed-grade urea to improve its feeding value

How urea treatment turns cereal straw into a more digestible feed, the usual dose and moisture, sealing and curing times, and the safety points to follow.

Written by the Nuroil trade desk, Sharjah

Illustration of Nuroil feed grade urea with cattle feeding
On this page · 5 sections
  1. 01How the treatment works
  2. 02Dose, water and time
  3. 03Step by step
  4. 04Safety and feeding points
  5. 05Which urea to use

Cereal straw is plentiful wherever grain is grown, but on its own it is a poor feed. It is low in nitrogen and its fibre is locked up with lignin, so ruminants digest it slowly and eat little of it. Treating straw with urea is a low-cost way to improve both problems. The urea releases ammonia inside a sealed stack, which softens the fibre and adds nitrogen. The method has been studied widely in Asia and Africa and is used on smallholdings and larger farms alike.

How the treatment works

Urea dissolved in water is sprinkled onto straw, which is then compacted and sealed. Naturally occurring urease enzymes on the straw break the urea down to ammonia and carbon dioxide. Because the stack is sealed, the ammonia stays in contact with the straw. It weakens the bonds between lignin and the digestible fibre, so rumen microbes can reach more of it, and some of the nitrogen is retained in the straw. The result is a feed that animals eat more of and digest better than untreated straw.

Dose, water and time

Guidance from research programmes converges on a fairly standard recipe, with adjustments for climate and straw type:

FactorCommon guidanceNotes
UreaAbout 4 kg per 100 kg of dry strawBelow about 3.5 kg may not release enough ammonia; above 4 kg has generally not improved quality further
WaterAbout 30–40 litres per 100 kg of strawMoisture near 40% is the most common recommendation; too little water slows the reaction
Sealing periodRoughly 2–6 weeksShorter in hot weather, longer in cool conditions
Airing before feedingSeveral daysLets excess ammonia escape before animals eat it

Individual trials report different optimums. A study on rice straw found its best result with a higher urea rate and three weeks of treatment, while a barley straw study found good digestibility at 30% moisture. Local testing is worthwhile, but the standard recipe is a sound starting point.

Step by step

  1. Weigh the straw and calculate the urea and water needed.
  2. Dissolve the urea completely in clean water. Feed-grade urea dissolves readily; lumps should be broken up first.
  3. Spread the straw in layers and sprinkle the solution evenly over each layer, turning or treading it to spread the moisture.
  4. Compact the straw firmly to push out air.
  5. Cover and seal with plastic sheeting, weighting the edges, or use a pit, bunker or bags. The seal must hold the ammonia in.
  6. Leave for the curing period, then open one end, take out what is needed and reseal the rest.
  7. Spread the removed straw to air before feeding until the strong ammonia smell has gone.

Safety and feeding points

  • Opening a treated stack releases ammonia. Stand upwind, ventilate and avoid enclosed spaces; follow the product SDS.
  • Do not feed straw straight from the stack. Airing reduces the risk of animals taking in too much ammonia at once.
  • Do not feed dry urea on straw. Sprinkling solid urea onto forage without the treatment process risks poisoning.
  • Treated straw is for ruminants with a working rumen. Introduce it gradually and check it with a nutritionist.
  • Animals still need energy, minerals and some true protein; treated straw improves a basal ration rather than replacing a balanced diet.
  • Mouldy straw should not be treated or fed.
The ammonia does the work. A good seal and enough moisture matter as much as the urea dose.

Which urea to use

Because treated straw is fed to animals, use urea supplied and documented for feed use rather than fertilizer that may carry conditioners not intended for feed. Small, free-flowing granules dissolve quickly in the field. When buying, ask for nitrogen, biuret and moisture on the certificate of analysis, plus the SDS. Nuroil supplies feed-grade urea with a CoA on every delivery; request a quote with your volume and packing needs.

PRODUCTS IN THIS ARTICLE
KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote