When you buy an industrial chemical, the paperwork matters almost as much as the product. Documents prove what was supplied, tell your team how to handle it safely and allow the goods to clear customs. This article explains the three core documents, the certificate of analysis, the safety data sheet and the certificate of origin, and the other papers worth requesting.
Certificate of analysis (CoA)
A certificate of analysis reports laboratory test results for one specific production batch or lot. It shows that the material shipped meets the agreed specification. A useful CoA includes:
- Product name, grade and batch or lot number, matching the labels on the packages.
- Manufacturing date and, where relevant, shelf life or retest date.
- Each parameter tested, the specification limit and the actual result.
- Test methods used, for example a recognised international or national standard method.
- Name of the laboratory and an authorised signature.
Check the CoA against your purchase specification before the goods arrive, not after. If a parameter you care about is missing, such as water content or a specific impurity, ask for it to be included. A CoA is batch-specific, so a generic product data sheet is not a substitute.
Safety data sheet (SDS)
The SDS, still often called an MSDS, describes the hazards of the product and how to handle it safely. Under the Globally Harmonized System it follows a standard 16-section format:
| Sections | Content |
|---|---|
| 1–3 | Identification and supplier details; hazard classification and label elements; composition |
| 4–6 | First-aid measures; fire-fighting measures; accidental release measures |
| 7–8 | Handling and storage; exposure controls and personal protection |
| 9–11 | Physical and chemical properties; stability and reactivity; toxicological information |
| 12–16 | Ecological information; disposal; transport information; regulatory information; other information including revision date |
Ask for the current revision in a language your workforce can read, check that the product name and grade match what you are buying, and make sure it reaches the warehouse and production teams before the first delivery. In many jurisdictions the supplier is required to provide an SDS for hazardous chemicals, and employers must keep it accessible at the workplace.
Certificate of origin (CoO)
A certificate of origin states where goods were produced or substantially transformed. It is mainly a customs document, used to determine import duties and to support any preferential tariff treatment. Certificates are commonly issued or certified by chambers of commerce. Non-preferential certificates simply declare origin, while preferential certificates are tied to trade agreements and may reduce or remove duty. Check with your customs broker which type your import requires before the goods are shipped, because correcting a certificate afterwards can delay clearance.
Other documents worth requesting
- Technical data sheet or specification. The agreed product specification, against which the CoA is checked.
- Third-party inspection report. An independent inspector can verify quantity, packing, marking and quality, often by sampling at loading.
- Commercial invoice, packing list and bill of lading. Needed for payment and customs; quantities and descriptions should match the CoA and labels.
- Dangerous goods declaration. For hazardous cargo shipped by sea, confirming classification, packing group and packaging under the international maritime rules.
- Packaging certificates. For UN-approved drums, IBCs or tank containers, and tank cleanliness certificates for bulk liquids.
Agree the specification first, then insist that every document refers to the same product name, grade and batch numbers.
A simple checklist for your enquiry
- State the product, grade and full specification you need, including test methods if they matter.
- Ask for a sample CoA and the current SDS before placing the order.
- Confirm whether you need a certificate of origin and which type.
- Decide whether third-party inspection is required and who will appoint the inspector.
- Agree the Incoterm, packing and labelling requirements.
How Nuroil handles documents
Nuroil provides a certificate of analysis with every delivery, and supplies the SDS, certificate of origin and third-party inspection on request, on FOB, CFR or CIF terms. Whether you are buying caustic soda, soda ash or other industrial and specialty chemicals, list the documents you need on the quote request form so they can be arranged before shipment.


