Ammonium chloride, NH₄Cl, is a white crystalline salt that dissolves readily in water. Dissolved and dosed after chlorine, it supplies the ammonia that turns free chlorine into monochloramine, a longer-lasting disinfectant that forms fewer chlorinated by-products in long networks.
As a dry solid it avoids the pressure storage of anhydrous ammonia and the handling of aqua ammonia, which suits smaller plants. Outside water treatment it is a galvanising and soldering flux, a clay stabiliser in oilfield fluids and a raw material for batteries and chemicals.
Identity
Formula
NH₄Cl
Molar mass
53.49 g/mol
CAS
12125-02-9
Ammonium chloride · NH₄ClWhy Ammonium chloride
Dry, simple ammonia sourceA stable solid dissolved on site: no pressure vessels or volatile ammonia solution to store.
High purity99.5% min with low iron, heavy metals and insolubles, so solutions stay clear for dosing.
Accurate dosingKnown nitrogen content makes it easy to set the chlorine-to-ammonia ratio.
Documented qualityEach offered batch comes with its Certificate of Analysis and safety data sheet.
What Nuroil does on every order
Why choose ammonium chloride from Nuroil?
Checked against the batch CoA
Purity, moisture, iron and heavy metals are reviewed on the batch certificate before loading.
Grade matched to the use
Technical grade for water and flux; food or pharmaceutical grade only when certified.
Packed against caking
PE-lined bags that keep out the moisture that cakes the crystals.
One desk, firm offers
FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.
02 TECHNICAL DATA
Technical specification.
Ammonium chloride (NH₄Cl), dry basis
99.5% minFormaldehyde titration
Moisture
0.5–0.7% maxLoss on drying
Residue on ignition
0.1–0.4% maxGravimetric
Iron (Fe)
0.001% max (10 mg/kg), by producerColorimetric / ICP
Heavy metals (as Pb)
0.0005% maxColorimetric / ICP
Sulphate (SO₄)
0.02% maxTurbidimetric
pH (200 g/L solution, 25 °C)
4.0–5.8pH meter
Appearance
White crystalline powder or granulesVisual
Reference standard
GB/T 2946 (Chinese producers)
01TECHNICAL 99.5%
Water and industry
White crystalline powder for chloramination, flux, oilfield fluids and chemical use.
02GRANULAR
Low dust
Coarser granules that flow freely and dust less, for dissolving tanks and blending.
03FERTILIZER GRADE
Nitrogen fertilizer
About 25% nitrogen for rice and compound fertilizers; not for drinking water.
04FOOD AND PHARMA
Certified only
Food (E510) or pharmacopoeia grade where the producer certifies it.
Selection guidance Tell us the use, the dissolving and dosing set-up and any drinking-water certificate required, and we will confirm the grade.
Three ways to add ammonia after chlorine. The right one depends on plant size, safety rules and dosing equipment.
Property
Ammonium chlorideThis page
Ammonium sulphate
Aqua or anhydrous ammonia
Form
Dry solid
Dry solid
Liquid or pressurised gas
Nitrogen content
About 26%
About 21%
About 20–82%
Handling
Simple
Simple
Demanding
Adds to the water
Chloride
Sulphate
Nothing else
Best suited to
Small to medium plants
Small to medium plants
Large plants
03 HOW IT IS MADE
From ammonia and salt to clean crystals.
Most ammonium chloride is a co-product of soda ash made by the combined (Hou) process, where ammonia and carbon dioxide are passed through salt brine. It is also made directly from ammonia and hydrochloric acid. The crystals are separated, washed, dried and screened.
01
Ammonia and brine
Ammonia and CO₂ are absorbed in salt brine, or ammonia meets hydrochloric acid.
02
Crystallising
Ammonium chloride is crystallised from the cooled liquor.
03
Drying
The crystals are centrifuged, washed and dried, then screened to size.
04
Testing and packing
Each batch is tested for purity, moisture and metals, then bagged.
04 APPLICATIONS
Where it works.
01
Chloramination
Ammonia source to form monochloramine for a lasting residual in long networks.
02
Galvanising flux
Zinc ammonium chloride flux for hot-dip galvanising, and soldering flux.
03
Oilfield fluids
Temporary clay stabiliser in fracturing and completion fluids.
04
Batteries
Electrolyte for zinc-carbon dry cells.
05
Chemicals and metals
Raw material and process aid in chemicals, metal treatment and textiles.
06
Fertilizer
Nitrogen fertilizer for rice and compound blends, in fertilizer grade.
05 SAFETY & HANDLING
Harmful if swallowed. Mind the fumes.
This summary does not replace the Safety Data Sheet. Review the SDS and site procedure before first handling.
Warning
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
UN
Not regulated
Transport
Not dangerous goods
01
Protect the eyes
It causes serious eye irritation; wear goggles and avoid breathing dust.
02
Keep from alkalis
Lime, caustic soda and soda ash release ammonia gas from it.
03
Keep from hypochlorite
Concentrated hypochlorite or chlorine with it forms toxic chloramines and nitrogen trichloride; dose them only at the designed points, in dilute form.
04
Avoid strong heat
Above about 340 °C it gives off ammonia and hydrogen chloride fumes.
05
Exposure response
Rinse eyes with plenty of water for several minutes; if swallowed, rinse the mouth and seek medical advice.
Dry and apart.
Shelf lifeAbout 2 years
Ammonium chloride is stable, but it absorbs moisture and cakes if left open. Kept sealed and dry it keeps its quality. Confirm the producer’s shelf life with the offer.
Keep bags sealedHumid air cakes the crystals; reseal opened bags.
Dry, ventilated storeOn pallets, off the floor, with good ventilation.
SegregateApart from alkalis, hypochlorites, chlorine products and nitrates.
First in, first outUse the oldest stock first and keep the batch label with each lot.
Plan documentation early.
HS code2827.10
CAS number12125-02-9
EC number235-186-4
TransportNot regulated
GHS
Harmful if swallowed; causes serious eye irritation
Transport
Not regulated as dangerous goods
Drinking water use
Confirm local approval of the product for potable water (for example NSF/ANSI/CAN 60)
National regulations
Confirm the destination’s import requirements
06 PACKING OPTIONS
Choose your packing.
Pack sizes and container loads depend on the producer and grade; the offer confirms them.
Smaller orders
25 kg lined bags
PP woven or paper bags with a PE liner, palletised, the usual export packing.
01How is ammonium chloride used in chloramination?
It is dissolved and dosed after chlorine, so the ammonia reacts with free chlorine to form monochloramine. Plants usually aim for a chlorine-to-ammonia-nitrogen ratio of about 4–5 to 1 by weight; the design and local rules set the figure.
02How much ammonia does it supply?
Ammonium chloride is about 26% nitrogen, or about 32% as NH₃, so roughly 3.8 kg supplies 1 kg of ammonia nitrogen.
03Why choose it over ammonia gas?
It is a dry, stable solid that needs no pressure storage or gas safety systems, which suits small and medium plants.
04Can it be stored with chlorine products?
No. Keep it apart from hypochlorites, chlorine and alkalis. Mixed in concentrated form they release toxic gases.
05Is it dangerous goods for shipping?
No. Ammonium chloride is not regulated as dangerous goods. It is harmful if swallowed and an eye irritant, and is labelled accordingly.
06What is the HS code?
Ammonium chloride is classified under HS 2827.10. Its CAS number is 12125-02-9.
07What documents come with a shipment?
A Certificate of Analysis and Safety Data Sheet, with the Certificate of Origin as required.
Include the grade, the use, packing, quantity and destination for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.