Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / WATER TREATMENT / TRISODIUM PHOSPHATE

Trisodium phosphate.Boiler phosphate.

Technical trisodium phosphate, as dodecahydrate crystals or anhydrous powder, for boiler water treatment, industrial cleaning, degreasing and metal pretreatment.

  • 98% min Na₃PO₄·12H₂O
  • Crystals · anhydrous
  • pH about 12 (1%)
  • Not dangerous goods
Pencil drawing of Trisodium Phosphate (TSP)
FormulaNa₃PO₄·12H₂OCAS 10101-89-0
Trisodium phosphateNa₃PO₄·12H₂OBoiler phosphate and cleaner
HazardWarningUN Not regulated
Na₃PO₄·12H₂O (crystals)98% min
P₂O₅ (crystals)18.3% min
P₂O₅ (anhydrous)About 42–43%
pH, 1% solutionAbout 11.5–12.5
Melts (crystals)About 73 °C, in its own water
Switch productThe scale and corrosion range
See the industry
01 THE MATERIAL

What is trisodium phosphate?

Trisodium phosphate, TSP, Na₃PO₄, is a strongly alkaline sodium phosphate. It is sold mainly as white dodecahydrate crystals, Na₃PO₄·12H₂O, which carry twelve molecules of water, and as the anhydrous powder, which carries none and so about two and a half times the phosphate per kilogram.

In boilers, phosphate dosed into the water precipitates calcium as a soft sludge that leaves with the blowdown, rather than as hard scale, and holds the pH where steel is protected. Its alkalinity also makes it a strong cleaner and degreaser. It irritates skin and eyes; the anhydrous grade is more aggressive.

Identity
Formula
Na₃PO₄·12H₂O
Molar mass
380.1 g/mol (163.9 anhydrous)
CAS
10101-89-0
Trisodium phosphate · Na₃PO₄
Why Trisodium phosphate
  • Scale to sludgeTurns calcium hardness in boiler water into a soft sludge removed with the blowdown.
  • Alkalinity and phosphate togetherOne product supplies both the phosphate residual and the alkalinity a boiler programme needs.
  • Crystals or anhydrousCrystals dissolve easily; anhydrous carries the most phosphate per tonne shipped.
  • Documented qualityEach offered batch comes with its Certificate of Analysis and safety data sheet.
What Nuroil does on every order

Why choose trisodium phosphate from Nuroil?

  • Checked against the batch CoA

    Assay, P₂O₅, insolubles, iron and pH are reviewed on the batch certificate before loading.

  • Kept out of the heat

    The crystals soften from about 40 °C and melt near 73 °C; we plan loading and transit with that in mind.

  • Packed against moisture

    Lined bags, so the crystals do not cake or the anhydrous take up water.

  • One desk, firm offers

    FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.

02 TECHNICAL DATA

Technical specification.

Na₃PO₄·12H₂O (crystals)
98.0% minAcid-base titration
P₂O₅ (crystals)
18.3% minGravimetric (quinoline phosphomolybdate)
Na₃PO₄ (anhydrous)
97–98% minAcid-base titration
Sulphate (SO₄)
0.5% maxTurbidimetric
Chloride (Cl)
0.4% maxTitration
Water-insoluble matter
0.1% maxGravimetric
Iron (Fe)
0.01% maxICP / colorimetric
Arsenic (As)
0.005% maxAAS / ICP
pH (1% solution)
11.5–12.5pH meter
Reference standard
HG/T 2517 (Chinese producers)
03 HOW IT IS MADE

From phosphoric acid to crystals.

Phosphoric acid is neutralised with soda ash to disodium phosphate, releasing carbon dioxide, then with caustic soda to trisodium phosphate. The solution is filtered and cooled to crystallise the dodecahydrate, or dried and calcined to the anhydrous salt.

  1. 01

    Acid and soda

    Phosphoric acid with soda ash, then caustic soda.

  2. 02

    Neutralising

    Two stages give disodium, then trisodium phosphate; carbon dioxide is released.

  3. 03

    Crystallising

    The filtered solution is cooled to crystals, or dried to anhydrous.

  4. 04

    Testing and packing

    Each batch is tested for assay, P₂O₅ and impurities and bagged.

Phosphoric acidSoda ashCO₂Crystals · anhydrous01Acid and soda02Neutralising03Crystallising04Testing and packing
04 APPLICATIONS

Where it works.

05 SAFETY & HANDLING

Strongly alkaline. Protect skin and eyes.

This summary does not replace the Safety Data Sheet. Review the SDS and site procedure before first handling.

Warning
  • H315 Causes skin irritation (some SDSs: H314 for the anhydrous grade).
  • H319 Causes serious eye irritation.
  • H335 May cause respiratory irritation.
UN
Not regulated
Transport
Not dangerous goods, per most SDSs
  1. 01
    Eye and skin protection

    Wear goggles and gloves; some SDSs classify the anhydrous grade as corrosive.

  2. 02
    Control dust

    Dust irritates the nose and throat; use extraction or a dust mask.

  3. 03
    Keep from acids

    It reacts with acids, releasing heat; keep it apart from acids and ammonium salts.

  4. 04
    Protect aluminium and zinc

    Strong alkaline solutions attack aluminium, zinc and galvanised steel.

  5. 05
    Exposure response

    Rinse skin or eyes immediately with plenty of water for at least 15 minutes and seek medical attention.

Cool, dry and sealed.
StoreBelow 40 °C, dry

The crystals lose water and cake when warm and melt in their own water near 73 °C; kept cool, dry and sealed they keep well. Confirm the producer’s shelf life with the offer.

  • Keep it coolBelow about 40 °C, out of direct sun and away from heat sources.
  • Keep bags closedReseal bags at once; damp air makes the product cake.
  • SegregateApart from acids, ammonium salts and aluminium and zinc.
  • First in, first outUse the oldest stock first and keep the batch label with each lot.
Plan documentation early.
  • HS code2835.29
  • CAS number10101-89-0
  • EC number231-509-8
  • TransportNot regulated
GHS
Skin irritation; serious eye irritation; respiratory irritation (some SDSs: skin corrosion, anhydrous)
Transport
Not regulated as dangerous goods, per most SDSs
Product standard
HG/T 2517 industrial trisodium phosphate (Chinese producers)
National regulations
Confirm the destination’s import requirements, including any phosphate limits for cleaners
06 PACKING OPTIONS

Choose your packing.

Pack sizes and container loads depend on the producer and grade; the offer confirms them.

07 BEFORE YOU ORDER

Frequently asked questions.

01How is trisodium phosphate used in boilers?

Dosed to keep a phosphate residual, it precipitates calcium as a soft sludge removed with the blowdown and holds the alkalinity that protects steel. The residual and pH limits depend on boiler pressure; follow your water-treatment programme.

02Dodecahydrate or anhydrous?

The dodecahydrate crystals are about 18–19% P₂O₅ and dissolve easily. Anhydrous is about 42–43% P₂O₅, so it carries more phosphate per tonne, but it releases heat as it dissolves and is more irritating.

03Why does it cake in hot weather?

The crystals carry twelve molecules of water. Above about 40 °C they start to lose it and stick together, and near 73 °C they melt. Store and ship it cool.

04Is it dangerous goods for shipping?

No. Trisodium phosphate is not regulated for transport under most producer SDSs. We confirm against the offered grade’s SDS.

05What is the HS code?

Trisodium phosphate is usually classified under HS 2835.29. The CAS number is 10101-89-0 for the dodecahydrate and 7601-54-9 for the anhydrous salt.

06What documents come with a shipment?

A Certificate of Analysis and Safety Data Sheet, with the Certificate of Origin and shipping documents as required.

LET’S PLAN YOUR SUPPLY

Discuss your trisodium phosphate requirement.

Include the form (dodecahydrate or anhydrous), grade, quantity, packing and destination for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Bags, jumbo bags or full loads
  • Dodecahydrate or anhydrous
  • FOB, CFR or CIF
Request a quote
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote