Technical sodium nitrite, 98.5–99% NaNO₂, the classic corrosion inhibitor for closed cooling and heating loops, and a raw material for dyes, heat-transfer salts and metal treatment.
Sodium nitrite, NaNO₂, is a white to slightly yellow crystalline salt that dissolves readily in water. In closed water systems it builds and holds a thin oxide film on steel, so that the metal stops corroding: an anodic inhibitor that has protected chilled-water, hot-water and engine-cooling loops for decades.
It is also an oxidiser and is toxic if swallowed. Stored dry and apart from acids, ammonium salts, reducing agents and combustibles, it is a stable, easily dosed solid.
Identity
Formula
NaNO₂
Molar mass
69.00 g/mol
CAS
7632-00-0
Sodium nitrite · NaNO₂Why Sodium nitrite
Proven in closed loopsA long-established steel inhibitor for chilled-water, hot-water and engine-cooling circuits, alone or in nitrite–borate and nitrite–molybdate blends.
Simple to dose and testDissolves quickly into a stock solution, and the residual is checked on site with a simple nitrite test kit.
Economical per loopLow cost per kilogram for the high concentrations a closed system needs, held for months where losses are small.
Documented qualityEach offered batch comes with its Certificate of Analysis and safety data sheet.
What Nuroil does on every order
Why choose sodium nitrite from Nuroil?
Checked against the batch CoA
Nitrite, nitrate, chloride and moisture are reviewed on the batch certificate before loading.
Dangerous-goods paperwork handled
Shipped as class 5.1 oxidiser with toxic subsidiary risk, with the correct UN entry, labels and declarations.
Packed against moisture
Lined woven bags or big bags, kept dry in transit and at the port.
One desk, firm offers
FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.
02 TECHNICAL DATA
Technical specification.
Sodium nitrite (NaNO₂), dry basis
99.0% min (98.5% min, second grade)Permanganate titration
Sodium nitrate (NaNO₃), dry basis
0.8% max (1.3% max, second grade)Calculated / colorimetric
Chloride (as NaCl), dry basis
0.10% max (0.17% max, second grade)Titration
Water-insoluble matter
0.05% maxGravimetric
Moisture
1.4% max (2.0% max, second grade)Loss on drying
Appearance
White or slightly yellow crystals or granulesVisual
Reference standard
GB/T 2367-2016 (Chinese producers)
0199% MIN
First grade
Lowest nitrate, chloride and moisture; the usual choice for water treatment blends, dyes and fine chemicals.
0298.5% MIN
Standard technical
Slightly higher nitrate and chloride; suits heat-transfer salts, metal treatment and general industrial use.
03FREE-FLOWING
Anti-caking treated
Some producers add a trace of anti-caking agent so the crystals stay loose in hot, humid storage.
04FOOD GRADE
On request
Meat-curing grade (E250) is a separate product with its own certificates; ask if you need it.
Selection guidance Tell us the system or process, the target nitrite level and the volume, and we will confirm the grade.
Both protect steel in closed loops, and they are often used together. The right balance depends on the system and its discharge rules.
Property
Sodium nitriteThis page
Sodium molybdate
Typical loop level
Several hundred to over 1,000 mg/L
A few hundred mg/L
Cost per loop
Low
Higher
Bacterial stability
Can be consumed by bacteria
Not consumed
Toxicity and discharge
Toxic; controlled discharge
Lower toxicity
Best suited to
Tight loops with low losses, regular testing
Loops with discharge limits or bacterial loss
03 HOW IT IS MADE
From ammonia to nitrite crystals.
Ammonia is burned over a catalyst to nitrogen oxides, which are absorbed into a soda ash or caustic soda solution to form sodium nitrite. The liquor is evaporated, crystallised, centrifuged and dried.
01
Ammonia and soda ash
Ammonia is oxidised to nitrogen oxides; soda ash or caustic soda makes the absorbing liquor.
02
Absorption
The nitrogen oxides are absorbed into the alkaline liquor to form sodium nitrite.
03
Crystallisation
The liquor is evaporated and the crystals separated, with the nitrate kept low.
04
Drying and packing
The crystals are dried, tested for nitrite content and packed in lined bags.
04 APPLICATIONS
Where it protects.
01
Closed cooling loops
Corrosion inhibition of chilled-water, district-cooling and process cooling circuits.
02
Hot-water and engine loops
Heating circuits and diesel-engine jacket water, often with borate or molybdate.
03
Heat-transfer salts
Molten nitrite–nitrate salt baths for heat transfer and metal heat treatment.
04
Dyes and chemicals
Diazotisation in azo dye, pigment and pharmaceutical intermediate production.
05
Metal treatment
Phosphating accelerators, steel blackening and temporary rust protection.
06
Hydrostatic test water
Protecting new pipelines and vessels during wet lay-up and pressure testing.
05 SAFETY & HANDLING
Oxidiser and toxic. Handle with care.
This summary does not replace the Safety Data Sheet. Review the SDS and site procedure before first handling.
Danger
H272 May intensify fire; oxidiser.
H301 Toxic if swallowed.
H319 Causes serious eye irritation.
H400 Very toxic to aquatic life.
UN
1500
Class
5.1 (6.1) · PG III
01
Toxic if swallowed
Small amounts can cause methaemoglobinaemia; never store it where it can be mistaken for salt or food.
02
Never mix with acids
Acids release toxic nitrogen oxide fumes.
03
Keep from ammonium salts and reducers
Mixtures with ammonium compounds, cyanides or reducing agents can decompose violently.
04
Away from fuels and organics
As an oxidiser it can intensify a fire; keep it from oil, wood, paper and solvents.
05
Exposure response
Rinse skin or eyes with plenty of water; if swallowed, seek medical attention at once and show the SDS.
Dry, locked and on its own.
StoreDry, sealed, apart
Stable when dry; it draws moisture and cakes in humid air. Kept sealed it holds its specification for a long time. Confirm the producer’s shelf life with the offer.
Keep bags closedReseal opened bags at once; moisture makes it cake.
Dry, ventilated storeUnder cover, off the floor and away from heat sources.
SegregateApart from acids, ammonium salts, reducing agents, fuels and food.
Restrict accessToxic if swallowed: store locked up, labelled and away from food and feed.
Plan documentation early.
HS code2834.10
CAS number7632-00-0
EC number231-555-9
UN numberUN 1500
GHS
Oxidising solid; acute toxicity (oral); eye irritation; very toxic to aquatic life
Transport
UN 1500 sodium nitrite, class 5.1 with subsidiary 6.1, PG III; marine pollutant
Product standard
GB/T 2367-2016 industrial sodium nitrite, where the producer certifies to it
National regulations
Confirm the destination’s import controls and dangerous-goods requirements
06 PACKING OPTIONS
Choose your packing.
Pack sizes and container loads depend on the producer and grade; the offer confirms them.
Smaller orders
25 kg and 50 kg bags
Woven polypropylene bags with polyethylene liner, palletised.
It is an anodic inhibitor: it keeps a thin, protective oxide film on steel. Too little nitrite can make corrosion worse at weak spots, so the level must be kept above the minimum the treatment programme sets.
02What dose does a closed loop need?
Programmes typically hold several hundred to over 1,000 mg/L of nitrite, often with borate or molybdate and a buffer. Your water-treatment programme sets the target; we supply the chemical.
03Can it be used in open cooling towers?
Generally not. Nitrite is consumed by bacteria and lost with blowdown, so it suits closed systems with low losses.
04Is it dangerous goods for shipping?
Yes. Sodium nitrite is UN 1500, class 5.1 oxidiser with subsidiary class 6.1 toxic, packing group III, and a marine pollutant. We prepare the dangerous-goods documents with the shipment.
05What is the HS code?
Sodium nitrite is classified under HS 2834.10. Its CAS number is 7632-00-0.
06Is your sodium nitrite food grade?
The standard offer is technical grade for industry and water treatment. Food grade (E250) is a separate product; ask if you need it.
07What documents come with a shipment?
A Certificate of Analysis and Safety Data Sheet, with the Certificate of Origin and dangerous-goods declaration as required.
Include the grade (99% or 98.5%), the use, quantity, packing and destination for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.