Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / SULPHUR / PASTILLATED

Pastillated sulphur.The lowest dust.

Uniform hemispherical sulphur pastilles, 99.5% S minimum, formed by precision drop-forming—the lowest-dust, most dimensionally consistent form for accurate dosing.

  • 99.5% S min
  • Uniform hemispheres
  • Very low dust
  • Precision dosing
Uniform flat-bottomed hemispherical sulphur pastilles beside precision dosing equipment
ElementSCAS 7704-34-9
Pastillated2–5 mmLowest dust, precise dosing
HazardWarningUN 1350 powder and lump
Sulphur content99.5% min
Particle size2–5 mm pastilles
Melting pointAbout 115 °C
Density2.07 g/cm³
In waterInsoluble
Switch formOne element, five forms
Compare the range
01 THE MATERIAL

What is pastillated sulphur?

Pastillated Sulphur is formed into small, uniform hemispheres through a precision drop-forming process. Its consistent size and weight support accurate automated metering while producing less dust than any other form.

That precision carries the highest typical cost per tonne, so it is best selected where dosing accuracy or dust reduction justifies the premium.

Identity
Element
S
Atomic mass
32.06
CAS
7704-34-9
Elemental sulphur · S
Why Pastillated sulphur
  • Lowest dustThe cleanest bulk-handling profile in the range.
  • Highest dosing precisionUniform size and weight reduce metering variance.
  • Tightest moisture control0.2% maximum typical.
  • Minimal finesDense uniform pastilles resist handling degradation.
What Nuroil does on every order

Why choose pastillated sulphur from Nuroil?

  • Checked against the batch CoA

    Sulphur content, ash, moisture and acidity are reviewed on the batch certificate before loading.

  • Form matched to your process

    Granular, lump, prilled, pastillated or powder, confirmed against how you receive and use it.

  • Jumbo bag to bulk vessel

    Containerised FIBC bags or bulk cargo, planned around your receiving facilities.

  • One desk, firm offers

    FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.

02 TECHNICAL DATA

Technical specification.

Sulphur content
99.5% minASTM D4239
Ash
0.05% maxASTM D4239
Moisture
0.2% maxASTM D2790
Acidity as H₂SO₄
0.05% maxTitration
Carbon
0.05% maxASTM D4239
Particle size
Uniform hemispherical, 2–5 mmSieve / dimensional check
Dust generation
Very low
Colour
Bright yellowVisual
Appearance
Uniform hemispherical pastillesVisual
03 HOW IT IS MADE

Precision drop-Forming.

Molten sulphur at approximately 125°C is metered through a rotary depositor onto a moving metal cooling belt. Each droplet solidifies into a uniform hemisphere before collection.

  1. 01

    Heated feed

    Molten sulphur is held near 125°C

  2. 02

    Rotary depositor

    Each droplet is precisely metered

  3. 03

    Cooling belt

    Droplets solidify as the belt moves

  4. 04

    Uniform pastilles

    Flat-bottomed hemispheres are formed

  5. 05

    Collection

    Finished product releases into the hopper

Sour gasCrudeH₂SFormed sulphur01Heated feed02Rotary depositor03Cooling belt04Uniform pastilles
04 APPLICATIONS

Where pastillated performs.

05 SAFETY & HANDLING

Low dust. Controlled storage.

Warning
  • H315 Causes skin irritation.
  • Dust Fine dust can form an explosive cloud; keep it from ignition sources.
UN
1350 powder and lump
Formed shapes
Not regulated (SP 242)
  1. 01
    Control fines

    Fines can accumulate and create a combustible-dust or static-charge hazard.

  2. 02
    Keep it from burning

    Burning sulphur produces toxic, irritating sulphur dioxide gas.

  3. 03
    Store it apart

    Store dry and ventilated, away from oxidisers and ignition sources.

  4. 04
    Follow the SDS

    Review the supplied Safety Data Sheet before handling or storage.

Dry, ventilated and away from sparks.
Keep itDry and ventilated

Sulphur is stable in storage. Moisture lowers quality and can build acidity over time, so keep it covered and dry.

  • Keep it coveredBags closed and stockpiles covered, out of the rain.
  • Ventilated storeGood ventilation and dust control where it is transferred.
  • No ignition sourcesAway from sparks, flames, hot surfaces and oxidisers.
  • First in, first outUse the oldest stock first and keep the batch label with each lot.
Standards & regulatory reference.
  • HS code2503.00
  • CAS number7704-34-9
  • EC number231-722-6
  • UN numberUN 1350
ASTM D4239
Sulphur, ash and carbon content
ASTM D2790
Moisture content
Destination rules
National commodity and chemical import requirements
06 PACKING

Jumbo bag or bulk.

Plan your order

How many containers is that?

Typical loads used for planning. Your offer confirms the exact packing and load for the product and source.

520 ft containers
jumbo bags
100
Last 20 ft container
17% full
  • Minimum orderOne 20 ft containerAbout 24–25 t in jumbo bags
  • BulkBy vesselPer vessel hold, confirmed at booking
  • DocumentsCoA with every batchSDS and Certificate of Origin on request
07 BEFORE YOU ORDER

Frequently asked questions.

01Why is Pastillated Sulphur more expensive?

Its precision drop-forming process meters each droplet individually, producing the most dimensionally consistent sulphur form.

02When is it worth the extra cost?

Where very low dust, accurate automated dosing or consistent particle weight directly affects safety or product quality.

03How is Pastillated Sulphur produced?

Molten sulphur at about 125°C is metered through a rotary depositor onto a moving cooling belt.

04What is the difference from Prilled Sulphur?

Pastillated uses drop-forming on a belt for tighter dimensions and lower moisture; Prilled solidifies in a water bath and is closely associated with fertilizers.

05What documents come with a shipment?

A Certificate of Analysis is supplied. Certificate of Origin and MSDS are available on request.

06What packing formats are available?

Jumbo bags and bulk supply are available, with smaller trial packs on request.

07What Incoterms are available?

FOB, CFR and CIF offers can be prepared around origin, destination and volume.

08Which standards are commonly used?

ASTM D4239 is referenced for sulphur, ash and carbon; ASTM D2790 for moisture.

LET’S PLAN YOUR SUPPLY

Discuss your Pastillated Sulphur requirement.

Include quantity, destination, application and packing preference for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Jumbo bag or bulk
  • Form-specific CoA and SDS
  • FOB, CFR or CIF
Request a quote
FROM THE KNOWLEDGE CENTRE

Guides & articles

Written by our trade desk to help you specify, compare and buy with confidence.

All guides & articles
ArticleSulphur · 3 minHow bentonite sulphur pastilles break down in the soil

Why bentonite sulphur pastilles swell and fall apart in moist soil, and what controls how fast the released sulphur becomes…

Read
ArticleSulphur · 3 minUsing sulphur pastilles to lower soil pH in alkaline soils

How elemental sulphur from pastilles acidifies alkaline soil, why progress is slow, and the limits in calcareous soils.

Read
ArticleSulphur · 3 minTiming bentonite sulphur pastille applications ahead of the crop

Field trials show bentonite sulphur pastilles release sulphate slowly. How to time and place them, and when a sulphate source is…

Read
GuideSulphur · 3 minSulphur pastille specifications: pure and bentonite grades

A reference to the two main sulphur pastille grades, the parameters on their certificates of analysis and which grade suits which…

Read
GuideSulphur · 3 minHow sulphur pastilles are made and how their quality is tested

The steel-belt pastillation process for sulphur, the quality properties it controls and the tests buyers can ask about.

Read
GuideSulphur · 3 minBagging, storing and spreading bentonite sulphur pastilles

Practical guidance for distributors and farms on keeping bentonite sulphur pastilles dry, free-flowing and safe from warehouse to…

Read
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote