Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read6 sections

Knowledge centre · Sulphur

Using sulphur pastilles to lower soil pH in alkaline soils

How elemental sulphur from pastilles acidifies alkaline soil, why progress is slow, and the limits in calcareous soils.

Written by the Nuroil trade desk, Sharjah

Pencil sketch of pastillated sulphur
On this page · 6 sections
  1. 01Where the acidity comes from
  2. 02Why progress is slow in alkaline soil
  3. 03The limit in calcareous soils
  4. 04Planning an application
  5. 05Cautions
  6. 06Buying for a soil-amendment programme

In many dry regions, soils are alkaline. High pH reduces the availability of iron, zinc, manganese and phosphorus, and growers of acid-loving or micronutrient-sensitive crops often look to elemental sulphur to bring the pH down. Pastillated sulphur, especially the bentonite grade, is one of the most convenient ways to apply it. It is worth understanding how the acidification works before committing to a programme.

Where the acidity comes from

Elemental sulphur does not change soil pH on its own. The acidity is produced only when soil microbes oxidise the sulphur to sulphate. For every atom of sulphur oxidised, two hydrogen ions are released, which is the same chemistry that produces sulphuric acid. If oxidation does not happen, pH does not fall.

This also explains why sulphate fertilizers such as potassium sulphate or gypsum supply sulphur without lowering pH: their sulphur is already oxidised. The exceptions are sulphates that carry an acid-forming partner, such as ammonium sulphate.

Why progress is slow in alkaline soil

Several features of alkaline soils work against fast oxidation:

  • Many sulphur-oxidising organisms are more active in acid soils than in alkaline ones, so the starting population may be small.
  • Alkaline soils in hot, dry regions often sit well below field capacity for long periods, and dry soil slows oxidation.
  • Applications made in the cool part of the year oxidise slowly; an optimum of roughly 27 to 35 degrees Celsius is commonly quoted.

Particle size is the factor a buyer controls. Fine sulphur oxidises much faster than coarse material, which is why a pastille must disperse into small fragments to be useful. A pure sulphur pastille without bentonite does not break down in this way and is a poor choice for soil amendment unless it is ground first.

The limit in calcareous soils

Soils that contain free calcium carbonate (lime) are a special case. Each unit of acidity produced by the sulphur reacts first with the lime, so the bulk soil pH stays buffered until that lime is consumed. In strongly calcareous soils the quantity of sulphur needed to neutralise all the carbonate can be impractically large. In those situations, growers usually aim for a local, temporary effect: sulphur placed in the root zone or along the row can lower pH in small pockets and release micronutrients there, even if the field average barely moves.

Test for free lime before planning a pH-lowering programme. It decides whether the goal is a field-wide change or a root-zone effect.

Planning an application

  1. Test the soil. Measure pH, free carbonate, texture and organic matter. Buffering rises with clay and organic matter, so a heavy soil needs more sulphur for the same change than a sandy one.
  2. Get a rate from a local agronomist. Rates depend on soil and target and should come from local trial data or an extension service rather than a generic table.
  3. Apply early and mix in. Broadcast bentonite pastilles and incorporate them into moist soil weeks to months before planting. Surface sulphur on dry soil oxidises very slowly.
  4. Split large rates. Spreading a large requirement over several applications avoids sharp local acidity and lets you track progress.
  5. Re-test. Check pH after a few months. Oxidation can take from several weeks to several months depending on conditions.

Cautions

Overshooting is possible. In incubation studies, repeated sulphur additions have driven soil pH down by more than two units within weeks, to the point where lime had to be added back. Avoid application to waterlogged ground, where sulphur can be reduced to hydrogen sulphide instead of oxidised. Handle the product as a combustible solid and keep it away from strong oxidisers; follow the SDS for storage and personal protection.

Buying for a soil-amendment programme

For pH correction, specify a dispersible grade, typically around 90% elemental sulphur with bentonite, and ask the supplier for sulphur content, pastille size and moisture on the CoA. Nuroil can supply bentonite sulphur pastilles in bags or bulk; send your quantity, packing and destination through a quotation request.

PRODUCTS IN THIS ARTICLE
KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote