Prilled sulphur is bought mainly by sulphuric acid producers, fertilizer manufacturers and chemical plants that melt or grind it. A clear enquiry gets comparable offers and avoids disputes on arrival. This checklist covers the points buyers most often need to define.
Use and specification
Describe your use.
- End use: acid production, fertilizer manufacture (for example sulphur-bentonite or sulphur-enhanced phosphates), chemicals or grinding.
- How you process it: melting, grinding, blending or direct feeding.
- Annual volume, lot size and delivery pattern.
Telling the supplier the use helps them propose a suitable source and confirm which parameters matter.
Chemical specification.
| Parameter | Why you set a limit |
|---|---|
| Sulphur purity (dry basis) | Basic value and process yield |
| Ash | Filter load and catalyst fouling in acid plants |
| Carbon (organics) | Colour and filtration |
| Acidity as H₂SO₄ | Corrosion and lime demand when melting |
| Arsenic, selenium, tellurium | Sensitive acid grades and soil-applied products |
Physical specification.
- Size range and maximum share of fines.
- Moisture, stated as a maximum and with the point of measurement.
- Friability if dust or fines are a concern, naming the test method.
- Forming process, for example water prilled or air prilled, since this affects moisture and shape.
Formed sulphur quality is often described against the SUDIC premium and standard criteria. Wet prills typically fall into the standard category because of moisture, which can be perfectly acceptable for a melter if the price and moisture limit reflect it.
Packing, shipping and documents
Packing.
- Bulk vessel, for large volumes and ports with grab discharge.
- Jumbo bags (typically around one tonne) or smaller bags, for container shipment and sites without bulk handling.
- Bag type, liner and marking requirements, and whether bags travel palletised.
Shipping and terms.
- Incoterm: FOB loading port, or CFR or CIF to your discharge port.
- Discharge port, berth restrictions and discharge rate for bulk cargoes.
- Formed sulphur meeting the shape requirements is normally carried as an IMSBC Group C cargo; confirm that the cargo description on the bill of lading matches.
- Hold preparation expectations, such as clean, dry and lime-washed holds.
Documents.
- Certificate of analysis for each lot.
- Safety data sheet.
- Certificate of origin, if your customs or financing requires it.
- Independent inspection certificate for quality and quantity at loading, if required.
- Bill of lading, commercial invoice and packing or weight list.
Contract, timing and receiving
Quality settlement.
- State whether weight and price are settled on wet or dry basis.
- Agree tolerances for purity, moisture and fines, and what happens if a lot falls outside them.
- Decide whether loading-port or discharge-port results are final, and how a referee analysis is triggered.
Writing these points into the contract before shipment is far easier than negotiating them after a disputed result.
Planning and timing.
- Allow for production and shipping lead times, and for any seasonal peaks in your own demand, such as fertilizer production ahead of planting.
- Check your storage capacity against lot size so that prills are not left uncovered or stacked too high.
- Consider whether a regular supply schedule or spot purchases suit your plant better.
Receiving.
- Agree sampling method and referee laboratory in advance.
- Test moisture and fines at discharge as well as chemical purity.
- Prepare drained, covered or hard-standing storage and dust control.
- Brief staff using the SDS on dust, fire and personal protection.
The two lines most often missing from prilled sulphur enquiries are a moisture limit and a fines limit. Both affect cost and safety.
Sending your enquiry
With these points defined, suppliers can quote like for like. Nuroil supplies prilled sulphur on FOB UAE ports or CFR and CIF terms, with a CoA on every delivery and CoO, MSDS and third-party inspection on request. Use our request a quote form or contact us to share your specification.


