Caustic soda flakes are a dangerous good in transport and a hazardous substance at the workplace. Every bag, drum and container must carry the right markings, and the shipping documents must match. Mistakes cause delays at the port, rejected bookings and, more importantly, people handling a corrosive without warning. This guide summarises the classification that applies to solid sodium hydroxide and what you should see on a correct shipment. Always confirm details against the safety data sheet and the current transport regulations.
Transport classification
For the solid forms, including flakes, pearls and solid castings, the internationally used entry is:
| Item | Entry for solid caustic soda |
|---|---|
| UN number | UN 1823 |
| Proper shipping name | SODIUM HYDROXIDE, SOLID |
| Hazard class | 8 (corrosive substances) |
| Packing group | II |
| Marine pollutant | No |
Caustic soda solution, by contrast, travels under UN 1824. Using the liquid number for flakes, or the reverse, is a common documentation error worth checking.
The same classification applies under the IMDG Code for sea freight, ADR for road transport in Europe and the equivalent road and rail rules elsewhere, and the IATA rules for air, each with its own detailed packing and quantity provisions.
Packaging and package marks
Packing group II goods must travel in UN-approved packaging tested to that level. The packaging carries a UN specification mark: a code identifying the type, such as 5H for woven plastic bags, 1A2 for open-head steel drums or 13H for woven plastic flexible bulk bags, followed by a letter X or Y showing the highest packing group it is approved for. For caustic soda flakes the mark must show X or Y.
Each package should also carry:
- The UN number and proper shipping name.
- The class 8 corrosive transport label, a black and white diamond showing liquid attacking a hand and a metal bar.
- Product name, net weight and lot or batch number.
- Supplier identification and the workplace hazard label described below.
Container and document requirements
A freight container carrying caustic soda flakes is placarded with the class 8 placard and the UN number as required. The shipper issues a dangerous goods declaration, and for sea freight the container packing must be certified. Caustic soda must be segregated from acids, since it reacts violently with them, and stowed to keep it dry. Packages with damp or torn bags should not be loaded, because the wet product attacks metals and can leak.
GHS hazard labelling
On the workplace and supply side, sodium hydroxide is classified under the Globally Harmonised System. In the European CLP system it has a harmonised classification. A typical label for solid caustic soda shows:
- Signal word: Danger.
- Pictogram: GHS05, corrosion.
- H290: may be corrosive to metals.
- H314: causes severe skin burns and eye damage.
- Precautionary statements covering protective gloves, clothing and eye or face protection, rinsing skin and eyes, not inducing vomiting if swallowed, and calling a poison centre or doctor.
- Identifiers such as the CAS number 1310-73-2 and EC number 215-185-5.
National rules may add language requirements or local registration numbers. Where product is repacked for sale to the general public, as with drain openers, extra packaging rules can apply, including child-resistant closures and tactile warnings.
Solid caustic soda is UN 1823, class 8, packing group II. Check that the bags, the declaration and the safety data sheet all say the same.
What to request from your supplier
Ask for the safety data sheet in the language your site needs, a description of the UN-approved packaging, and copies of the bag or drum specification marks if you plan to re-export. For each shipment, the dangerous goods declaration and certificate of analysis should travel with the other documents. Nuroil ships caustic soda flakes in UN-marked packaging and provides the documents with each delivery; contact us with any specific labelling requirements for your market.


