An incomplete enquiry for APP modified membranes usually leads to quotes that cannot be compared: different thicknesses, reinforcements and finishes all offered under the same general description. This guide is a checklist for importers, distributors and contractors. Use it to build a clear enquiry, compare offers on equal terms and check the goods when they arrive.
1. Define the product
- Modifier: APP (atactic polypropylene). Confirm the offer is not a lightly modified or oxidised sheet.
- Reinforcement: non-woven polyester, glass fleece or composite; state minimum mat weight if your specification requires it.
- Thickness or mass: nominal thickness (for example 3 mm or 4 mm) with tolerance, or mass per square metre for mineral caps.
- Top finish: mineral granules (with colour), sand, film, foil or smooth for coating.
- Bottom finish: torching film or other, matched to the installation method.
- Roll size: width and length, and selvage width on granule-surfaced caps.
2. Set the performance requirements
List the properties that matter and the test standard you expect them to be measured by. For APP the priorities are usually:
| Property | Typical EN method | Ask for |
|---|---|---|
| Flow resistance | EN 1110 | Value new and after ageing |
| Cold flexibility | EN 1109 | Value new and after ageing |
| Tensile strength and elongation | EN 12311-1 | Both directions |
| Tear resistance | EN 12310-1 | Both directions |
| Dimensional stability | EN 1107-1 | Declared limit |
| Watertightness | EN 1928 | Pass at stated pressure |
| Granule adhesion (caps) | EN 12039 | Declared value |
If you buy to ASTM, reference D6222 for polyester-reinforced APP sheets and state the type and grade. Remember that both EN and ASTM documents give minimum or limit values; ask whether the supplier's figures are typical results or guaranteed limits.
3. Packing and logistics
- Roll wrapping, cores and whether rolls are palletised upright.
- Rolls per pallet, pallet dimensions and gross weight, so container loading and site handling can be planned.
- Marking on each roll: product name, batch number, production date and dimensions.
- Storage instructions, including temperature and orientation.
- Incoterm (FOB, CFR or CIF), port of loading and destination, and expected loading window.
4. Documents
- Technical data sheet for the exact product offered.
- Declaration of performance where the product is sold under EN 13707, or a test report against the ASTM specification.
- Certificate of analysis or batch test certificate.
- Safety data sheet covering handling and hot-work precautions.
- Certificate of origin and packing list for customs; third-party inspection report if agreed.
5. Checks on arrival
- Compare roll labels and batch numbers against the packing list and certificate.
- Check that rolls arrived upright, without crushed ends, flattened cores or torn wrapping.
- Measure a sample of rolls for width, length and thickness.
- Unroll a sample in mild conditions: it should lie flat, without layers sticking or cracking.
- Inspect cap sheets for even granule cover and a clean selvage strip.
- Move stock straight into dry, shaded, upright storage.
6. Comparing offers
Put the offers side by side in a table with the same rows: reinforcement, thickness, finish, roll size, key test values, documents and packing. Differences that look small, such as a 3 mm sheet against a 4 mm sheet, or glass against polyester reinforcement, change both price and performance. Where one offer leaves a row blank, ask before deciding rather than assuming it matches the others. Quantities should be calculated from net roll area after laps, with an allowance for details and waste.
A good enquiry names the modifier, reinforcement, thickness, finish, test methods and documents. Anything left open will be filled in differently by each supplier.
Working with Nuroil
Nuroil supplies APP modified membranes sourced from established producers, with a certificate of analysis on every delivery and certificate of origin, SDS and third-party inspection available on request, on FOB, CFR or CIF terms. Send your completed checklist through the quote request form or speak to the team via the contact page.


