Liquid ammonia is anhydrous ammonia, NH₃, held as a liquid under its own vapour pressure. It boils at about −33 °C, and its large heat of evaporation makes it one of the most efficient refrigerants, known as R717, with no ozone-depletion or global-warming potential.
It is a toxic, corrosive gas with a sharp smell that warns at very low levels. It is shipped in pressure cylinders and tanks, and handled only in systems built for ammonia: no copper or brass, which it attacks.
Identity
Formula
NH₃
Molar mass
17.03 g/mol
CAS
7664-41-7
Anhydrous ammonia · NH₃ · R717Why Liquid ammonia
Efficient refrigerantHigh heat of evaporation and good heat transfer, for large cold stores, food plants and ice plants.
No climate penaltyZero ozone-depletion and global-warming potential, outside the phase-down of HFC refrigerants.
Low water and oilRefrigeration grade with tight water and oil limits, to protect compressors and keep systems efficient.
Documented qualityEach offered batch comes with its Certificate of Analysis and safety data sheet.
What Nuroil does on every order
Why choose liquid ammonia from Nuroil?
Checked against the batch CoA
Purity, water and oil are reviewed on the batch certificate before filling.
Dangerous-goods paperwork handled
Shipped as class 2.3 toxic gas under UN 1005, with the corrosive subsidiary risk and correct declarations.
Certified pressure containers
Cylinders and tanks within their test dates, filled to the permitted ratio.
One desk, firm offers
FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.
02 TECHNICAL DATA
Technical specification.
NH₃ content, commercial
99.5% minEvaporation residue / titration
NH₃ content, refrigeration grade
99.9% min (99.95% to IIAR)Evaporation residue / titration
Water, commercial
0.5% maxEvaporation residue
Water, refrigeration grade
0.2% max; 33–200 ppm on premium gradesKarl Fischer / residue
Oil
2–10 ppm max, by gradeGravimetric / IR
Appearance
Colourless liquefied gasVisual
Odour
Sharp, pungent
Reference standards
IIAR 2 / ANSI (refrigeration); IS 662; DIN 8960
0199.5% COMMERCIAL
Industrial use
For nitriding and heat treatment, water and flue-gas treatment, and chemical production.
0299.9%+ REFRIGERATION / R717
Refrigeration systems
Low-water, low-oil ammonia for charging and topping up industrial refrigeration plants.
Selection guidance Tell us the use, the water and oil limits your equipment maker sets, and the container you need, and we will confirm the grade.
Ammonia against the HFC refrigerants used in many smaller systems.
Property
Ammonia (R717)
R134a
R404A
Global-warming potential
0
About 1,430
About 3,920
Efficiency
High
Moderate
Lower
Toxicity
Toxic, class B
Low, class A
Low, class A
Refrigerant cost
Low
Moderate
High, phased down
Best suited to
Large industrial plants, cold stores
Smaller chillers and commercial units
Commercial refrigeration, being replaced
03 HOW IT IS MADE
From natural gas and air to liquid ammonia.
Ammonia is made by the Haber-Bosch process. Hydrogen from natural gas and nitrogen from air react over an iron catalyst at high pressure and temperature; the ammonia is condensed, refined and stored as a liquid.
01
Hydrogen and nitrogen
Natural gas is reformed to hydrogen; air supplies nitrogen.
02
Synthesis
The gases react over an iron catalyst at high pressure and temperature.
03
Condensation
The ammonia is cooled and condensed to a liquid and separated from unreacted gas.
04
Testing and filling
Each lot is tested for purity, water and oil and filled into cylinders or tanks.
04 APPLICATIONS
Where it is used.
01
Industrial refrigeration
Refrigerant for large industrial and process cooling plants.
02
Cold stores
Cold chain warehouses and blast freezers.
03
Food and beverage
Meat, fish, dairy, brewery and beverage cooling.
04
Ice plants
Block and flake ice production and ice rinks.
05
Metal treatment
Nitriding and protective atmospheres for heat treatment.
06
Emission control and chemicals
NOx reduction, water treatment and chemical production.
05 SAFETY & HANDLING
Toxic and under pressure. Trained hands only.
This summary does not replace the Safety Data Sheet. Review the SDS and site procedure before first handling.
Danger
H221 Flammable gas.
H280 Contains gas under pressure; may explode if heated.
H314 Causes severe skin burns and eye damage.
H331 Toxic if inhaled.
H400 Very toxic to aquatic life.
UN
1005
Class
2.3, subsidiary 8
01
Toxic if inhaled
Work only in ventilated areas with ammonia detection; keep a respirator or breathing apparatus ready.
02
Burns and frostbite
The liquid causes chemical burns and frostbite; wear face shield, insulated gloves and protective clothing.
03
Pressure equipment
Use only valves, hoses and fittings rated for ammonia; never use copper or brass, and never heat a cylinder.
04
Flammable in a narrow range
Ammonia burns at about 15–28% in air; keep ignition sources out of machine rooms.
05
Exposure response
Move to fresh air, flush skin and eyes with plenty of water for at least 15 minutes, and seek medical attention at once.
Upright, shaded and ventilated.
StoreShaded, upright, secured
Anhydrous ammonia does not degrade in a sealed container; the limit is the container’s test date. Heat raises the pressure, so keep cylinders and tanks out of the sun. Confirm the container’s next test date with the offer.
Secure the cylindersUpright or as marked, chained, with valve caps on when not in use.
Ventilated, shaded storeOut of direct sun and away from heat, with ammonia detection.
SegregateApart from acids, oxidisers, halogens and chlorine products.
Watch the temperatureKeep containers below the temperature their fill ratio allows.
Plan documentation early.
HS code2814.10
CAS number7664-41-7
EC number231-635-3
RefrigerantR717
UN numberUN 1005
GHS
Flammable gas; gas under pressure; toxic if inhaled; skin corrosion; very toxic to aquatic life
Transport
UN 1005, ammonia, anhydrous: class 2.3 with subsidiary class 8
Refrigeration codes
ISO 5149, EN 378 and IIAR standards govern system design and charge
National regulations
Confirm the destination’s import, pressure-vessel and dangerous-goods requirements
06 PACKING OPTIONS
Choose your packing.
Container types, sizes and filling depend on the producer and the destination’s pressure-vessel rules; the offer confirms them.
Smaller orders
Steel cylinders
Pressure cylinders of about 50 kg for charging and topping up plants.
R717 is the refrigerant code for anhydrous ammonia, NH₃. It is widely used in industrial refrigeration for its efficiency and its zero ozone-depletion and global-warming potential.
02Is liquid ammonia the same as ammonia solution?
No. Liquid ammonia is anhydrous ammonia held under pressure. Ammonia solution, or ammonium hydroxide, is ammonia dissolved in water, usually about 25%, and is a different product.
03Why does water content matter for refrigeration?
Water in an ammonia system raises the evaporating temperature, lowers capacity and can harm compressor oil. Refrigeration grade holds water and oil to tight limits.
04Is it dangerous goods for shipping?
Yes. It ships as UN 1005, ammonia, anhydrous, class 2.3 toxic gas with subsidiary class 8. We prepare the dangerous-goods documents with the shipment.
05What is the HS code?
Anhydrous ammonia is classified under HS 2814.10. Its CAS number is 7664-41-7.
06What containers do you supply in?
Steel cylinders for charging and topping up, larger ton containers, and pressure ISO tanks for bulk. Sizes depend on the producer and the destination’s rules.
07What documents come with a shipment?
A Certificate of Analysis and Safety Data Sheet, with the Certificate of Origin, dangerous-goods declaration and container test certificates as required.
Include the grade, use, container type, quantity and destination for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.