Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
NUROIL / SPECIALTY CHEMICALS / ETHYL ACETATE

Ethyl acetate.The fast solvent.

Ethyl acetate, 99.5% min, a clear, fast-evaporating solvent for printing inks, coatings, adhesives, pharmaceuticals and extraction.

  • 99.5% min purity
  • Fast evaporation
  • Low water, low acidity
  • Highly flammable
Pencil drawing of ethyl acetate solvent in sample glassware with drums
FormulaCH₃COOC₂H₅CAS 141-78-6
Ethyl acetate99.5% minFast-evaporating solvent
HazardDangerUN 1173
Purity99.5% min
Boiling pointAbout 77 °C
Flash pointAbout −4 °C (closed cup)
Density0.897–0.902 g/cm³ at 20 °C
Solubility in waterAbout 80 g/L at 20 °C
Switch productThe specialty range
See the industry
01 THE MATERIAL

What is ethyl acetate?

Ethyl acetate, CH₃COOC₂H₅, is the ester of ethanol and acetic acid: a clear, colourless liquid with a fruity smell. It dissolves a wide range of resins, so it is one of the main solvents for inks, lacquers and adhesives.

It evaporates quickly, has low toxicity among solvents and is only partly soluble in water. It is highly flammable: its vapour is heavier than air and can travel to a source of ignition, so it is stored and handled as a class 3 liquid.

Identity
Formula
CH₃COOC₂H₅
Molar mass
88.11 g/mol
CAS
141-78-6
Ethyl acetate · C₄H₈O₂
Why Ethyl acetate
  • Fast, clean dryingEvaporates quickly and leaves little residue, for fast press speeds and quick-drying coatings.
  • Strong solvencyDissolves nitrocellulose, polyurethane, acrylic and vinyl resins, and many natural products.
  • Low water and acidityTight limits on water, acid and alcohol for consistent ink and adhesive performance.
  • Documented qualityEach offered batch comes with its Certificate of Analysis and safety data sheet.
What Nuroil does on every order

Why choose ethyl acetate from Nuroil?

  • Checked against the batch CoA

    Purity, water, acidity and colour are reviewed on the batch certificate before loading.

  • Dangerous-goods paperwork handled

    Shipped as class 3 flammable liquid under UN 1173, with the correct labels and declarations.

  • Packed to stay dry

    Sealed steel drums, IBCs and ISO tanks, so the solvent picks up no water in transit.

  • One desk, firm offers

    FOB, CFR or CIF from our Sharjah trade desk, usually within 24 hours.

02 TECHNICAL DATA

Technical specification.

Purity
99.5% min (99.8% typical)Gas chromatography
Water
0.05–0.1% maxKarl Fischer
Acidity (as acetic acid)
0.005–0.01% maxTitration
Ethanol
0.1–0.2% maxGas chromatography
Colour
10 Pt-Co (APHA) maxASTM D1209
Residue on evaporation
0.005% maxGravimetric
Density at 20 °C
0.897–0.902 g/cm³ASTM D4052
Distillation range
Within about 76–78 °CASTM D1078
Appearance
Clear, colourless liquid, free of suspended matterVisual
03 HOW IT IS MADE

From ethanol and acetic acid to pure solvent.

Most ethyl acetate is made by esterifying ethanol with acetic acid over an acid catalyst. The ester is separated from water and unreacted alcohol by distillation and dried to specification. Some plants make it from ethanol alone by dehydrogenation, or from acetaldehyde.

  1. 01

    Ethanol and acetic acid

    The two raw materials are fed with an acid catalyst.

  2. 02

    Esterification

    They react to ethyl acetate and water, which is removed to drive the reaction.

  3. 03

    Distillation

    The ester is distilled and dried, separating water and unreacted alcohol.

  4. 04

    Testing and packing

    Each batch is tested for purity, water and acidity and sealed in drums or tanks.

EthanolAcetic acidCatalystEthyl acetate 99.5%01Ethanol and acetic acid02Esterification03Distillation04Testing and packing
04 APPLICATIONS

Where it dissolves.

05 SAFETY & HANDLING

Highly flammable. Control ignition.

This summary does not replace the Safety Data Sheet. Review the SDS and site procedure before first handling.

Danger
  • H225 Highly flammable liquid and vapour.
  • H319 Causes serious eye irritation.
  • H336 May cause drowsiness or dizziness.
  • EUH066 Repeated exposure may cause skin dryness or cracking.
UN
1173
Class
3, flammable liquid · PG II
  1. 01
    No sources of ignition

    Keep away from flames, sparks and hot surfaces; use explosion-protected equipment in handling areas.

  2. 02
    Earth and bond

    Earth drums, tanks and transfer lines to prevent static discharge when filling or emptying.

  3. 03
    Ventilate

    Vapour is heavier than air and may cause drowsiness or dizziness; work with good ventilation.

  4. 04
    Protect eyes and skin

    It causes serious eye irritation and dries the skin; wear goggles and solvent-resistant gloves.

  5. 05
    Exposure response

    Move to fresh air if vapour is inhaled; rinse eyes cautiously with water for several minutes and seek medical attention if irritation persists.

Cool, closed and earthed.
StoreCool, sealed, earthed

Ethyl acetate is stable in sealed, dry containers. Moisture slowly hydrolyses it to acetic acid and ethanol, raising acidity. Confirm the producer’s shelf life with the offer.

  • Keep containers closedSealed against moisture and vapour loss; reseal at once after drawing off.
  • Flammables storeCool, ventilated, out of direct sun, with explosion-protected fittings.
  • SegregateApart from oxidisers, strong acids and alkalis, and all sources of ignition.
  • First in, first outUse the oldest stock first and keep the batch label with each lot.
Plan documentation early.
  • HS code2915.31
  • CAS number141-78-6
  • EC number205-500-4
  • UN numberUN 1173
GHS
Flammable liquid, category 2 (H225); eye irritation (H319); drowsiness or dizziness (H336)
Transport
UN 1173, class 3, PG II
Pharma and food use
Only certified grades; confirm the pharmacopoeia or food-authority requirement
National regulations
Confirm the destination’s import and dangerous-goods requirements
06 PACKING OPTIONS

Choose your packing.

Pack sizes and container loads depend on the producer; the offer confirms them.

07 BEFORE YOU ORDER

Frequently asked questions.

01What is ethyl acetate used for?

Mainly as a solvent: in flexographic and gravure printing inks, adhesives, lacquers and coatings, and for extraction in pharmaceutical and food processing.

02What purity is standard?

Industrial ethyl acetate is 99.5% min, usually about 99.8%, with water, acidity and ethanol held to tight limits.

03Why do water and acidity matter?

Water slows drying and can react with polyurethane adhesives and inks; it also slowly breaks the ester down to acetic acid. Low water and acidity keep the solvent stable and the product consistent.

04Is it dangerous goods for shipping?

Yes. Ethyl acetate ships as UN 1173, class 3 flammable liquid, packing group II. We prepare the dangerous-goods documents with the shipment.

05What is the HS code?

Ethyl acetate is classified under HS 2915.31. Its CAS number is 141-78-6.

06Can it replace acetone or toluene?

Often, for inks, adhesives and cleaning, but the evaporation rate and solvency differ. Test it in your formulation before switching.

07What documents come with a shipment?

A Certificate of Analysis and Safety Data Sheet, with the Certificate of Origin and dangerous-goods declaration as required.

LET’S PLAN YOUR SUPPLY

Discuss your ethyl acetate requirement.

Include the grade, use, packing, quantity and destination for a tailored offer. We reply with a firm FOB, CFR or CIF offer, usually within 24 hours.

  • Drums, IBCs or ISO tanks
  • 99.5% min purity
  • FOB, CFR or CIF
Request a quote
LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote