Fresh industrial nitric acid is colourless or very pale. Buyers sometimes receive acid that is distinctly yellow, or see brown fumes when they open a drum. The colour is not dirt. It is a sign that some of the acid has decomposed, and the cause and consequences are worth understanding.
The chemistry behind the colour
Nitric acid slowly breaks down when exposed to light or heat, forming water, oxygen and nitrogen dioxide. Nitrogen dioxide is a reddish-brown gas. Part of it dissolves back into the acid and gives it a yellow to orange tint; the rest collects in the headspace of the container and escapes as brown fumes when the closure is opened.
Stronger acid decomposes more readily than weaker acid, so a 68% product is more prone to colour than a 55% product under the same conditions. Decomposition also increases with temperature, which is relevant in hot climates and for containers left in direct sun on quays or in yards.
Other causes of colour
- Production conditions. Acid from the absorption stage contains some dissolved nitrogen oxides. Producers normally remove these by blowing air through the acid in a bleaching step. Incomplete bleaching leaves a yellow product from the start.
- Contamination with organic matter. Nitric acid is a strong oxidiser. Oils, greases, sawdust or other organic material in a tank or container react with it, forming nitrogen oxides and sometimes heat. This is a safety issue, not only a quality one.
- Metal pick-up. Acid that has corroded unsuitable equipment can carry dissolved iron and other metals, which may also colour it.
Does it matter for users?
For many uses a slight yellow tint has little practical effect, because the nitric acid content changes only marginally. But dissolved nitrogen oxides do matter in several ways:
- Worker exposure. Nitrogen dioxide is toxic. Brown fumes when opening containers or filling tanks mean higher exposure for operators. The effects on the lungs can be delayed by several hours.
- Process effects. In metal finishing, dissolved nitrogen oxides change the behaviour of passivation and pickling baths. In chemical synthesis, nitrous species can cause unwanted side reactions.
- Specification. Many purchase specifications include a limit for dissolved nitrogen oxides or nitrous acid, and some set a colour limit. Acid outside those limits may be rejected even when concentration is correct.
- Pressure build-up. Decomposition releases gas. Closed containers stored warm for long periods can build pressure.
A yellow tint tells you nitrogen oxides are present; brown fumes tell you they are leaving the acid and entering the workplace.
Keeping nitric acid clear in storage
- Store containers out of direct sunlight and away from heat sources, in a cool, ventilated area.
- Keep tanks and containers free of organic material; never use sawdust or other combustible absorbents near the store.
- Use suitable materials of construction (commonly 304L stainless steel for bulk tanks, or approved plastic packaging for drums and IBCs) so that corrosion does not add metals.
- Vent bulk tanks to a safe location or a scrubber, so fumes do not accumulate.
- Rotate stock and avoid holding acid for long periods, especially in hot weather.
- Open containers slowly, in a ventilated place, with face protection, to release any pressure safely.
What to ask your supplier
If colour or nitrogen oxide content matters in your process, include a limit for each in your specification and ask for the results on the CoA. Ask how the acid will be packed and how long it is likely to spend in transit, especially through hot ports. Nuroil issues a CoA with every delivery and can arrange inspection at loading on request. Contact us to discuss your specification.
