Phosphoric acid is less violent than sulphuric or nitric acid, which sometimes leads to careless handling. It is still a corrosive liquid that burns skin, attacks common metals and releases hydrogen when it does. This guide covers the materials that hold it safely, how to dilute it, and the packing options for technical and food-grade acid at 75% and 85%.
Materials for tanks, pipes and seals
Material choice depends on concentration, temperature and impurities. Purified acid is far kinder to equipment than wet-process acid, which carries fluoride and chloride.
| Material | General suitability | Notes |
|---|---|---|
| HDPE and polypropylene | Widely used for drums, IBCs and small tanks | Suitable at ambient temperatures; check temperature limits for warm acid |
| FRP (vinyl ester) | Common for bulk storage tanks | Resin system and liner must be specified for phosphoric acid |
| Rubber-lined carbon steel | Standard for large tanks, especially wet-process acid | Lining type is matched to temperature and concentration |
| Stainless steel | Used for purified acid in some plants | Resistance falls with temperature and with chloride or fluoride present; confirm with corrosion data |
| PTFE and PVDF | Good for linings, gaskets, valves and pump parts | Higher cost but broad resistance |
| Carbon steel, galvanised steel, aluminium, copper alloys | Not suitable | Corroded rapidly; reaction releases hydrogen gas |
Compatibility ratings vary between published charts, so confirm the specific grade of plastic, lining or alloy with its manufacturer for your concentration and temperature.
Storage good practice
- Store in a cool, dry, ventilated area with secondary containment such as a bund or spill pallet.
- Keep away from alkalis, hypochlorites and other chlorine releasers, cyanides and sulphides, and reactive metals.
- Vent tanks, as any contact with metal can generate hydrogen. Keep ignition sources away during maintenance.
- For 85% acid, avoid prolonged cold storage. It can crystallise at around 21 °C; insulated or gently warmed storage helps in cool climates. Thaw slowly and mix before use.
How to dilute phosphoric acid safely
- Read the SDS and wear goggles plus a face shield, acid-resistant gloves, apron and boots. Have an eyewash and water supply at hand.
- Use a clean, compatible vessel such as HDPE, and work in a ventilated area.
- Put the required water in the vessel first.
- Add the acid slowly to the water while stirring. Never add water to concentrated acid.
- The 85% acid is thick and pours slowly; use a pump or a controlled dispensing tap rather than tipping heavy containers.
- Allow for some warming of the mixture, and let it cool before closing the container.
- Label the diluted solution with its name, concentration, date and hazard.
For spills, contain the liquid with sand or another inert absorbent, keep it out of drains, and neutralise only according to your site procedure and the SDS.
Water first, acid slowly, stir constantly, and never let diluted acid sit in a metal container.
Packing options
Phosphoric acid travels as UN 1805, class 8, usually packing group III. Because 85% acid weighs about 1.7 kg per litre, packs reach their weight limit long before they are full by volume.
- Jerricans and cans: small HDPE containers suit laboratories, workshops and low-volume users.
- HDPE drums: the usual choice for medium users. Closed-head drums with bung closures reduce spills and contamination. Net weights vary by producer.
- IBCs: a 1,000-litre IBC holds roughly 1.6 to 1.7 tonnes of 85% acid, so the IBC must be rated for a specific gravity of at least 1.7. Check this on the IBC plate and make sure forklifts and racking can take the load.
- ISO tank containers: for regular bulk users with suitable receiving tanks. Tanks are lined or made of a resistant alloy, often dedicated to the product, with a cleaning certificate before loading. Heating coils help if the acid may crystallise in cold weather.
Food-grade acid should travel in new or dedicated food-grade packaging, never in containers that previously held technical chemicals.
What to agree with your supplier
Specify the pack type and net weight, closure type, labelling language, pallet and container loading pattern, and for ISO tanks the tank material, previous cargo and cleaning certificate. Ask for the SDS and a CoA per batch. Nuroil supplies phosphoric acid on request on FOB, CFR or CIF terms; send your packing requirement through the quote request form or contact us.
