Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Guide3 min read6 sections

Knowledge centre · Industrial chemicals

Phosphoric acid grades compared: technical, food and merchant grade

A side-by-side reference to technical 85%, food-grade and merchant-grade phosphoric acid: how each is made, typical strength, impurities and uses.

Written by the Nuroil trade desk, Sharjah

Illustration of a young plant growing in field soil
On this page · 6 sections
  1. 01Two production routes
  2. 02The three grades side by side
  3. 03Converting between P2O5 and H3PO4
  4. 04Choosing the right grade
  5. 05Hazards common to all grades
  6. 06What to include in an enquiry

Phosphoric acid is sold under several grade names that are easy to confuse. All of them are aqueous solutions of orthophosphoric acid (H3PO4, CAS 7664-38-2), but they differ in how they are made, how strong they are, how strength is expressed and, above all, how many impurities they carry. Buying the wrong grade can mean paying for purity you do not need or receiving an acid that fails in your process. This guide sets out the three grades most commonly traded.

Two production routes

Every grade starts from phosphate rock, by one of two routes:

  • Wet process: rock is digested with sulphuric acid, gypsum is filtered off, and the acid is concentrated by evaporation. The crude product is impure and is used as it is for fertilizers.
  • Purified wet process: the same crude acid is cleaned up, usually by solvent extraction, then defluorinated and treated to remove arsenic and heavy metals. This is now the main source of technical and food-grade acid.
  • Thermal process: elemental phosphorus is burned and the oxide is absorbed in water. It gives a very pure acid but uses much more energy, so it is now a smaller share of supply.

The three grades side by side

FeatureMerchant grade (MGA)Technical gradeFood grade
ProductionWet process, concentrated, not purifiedPurified wet process or thermalPurified wet process or thermal, with extra purification
Usual strengthAbout 52–54% P2O575% or 85% H3PO475% or 85% H3PO4
How strength is quoted% P2O5% H3PO4% H3PO4
AppearanceDark green to black, may contain solidsClear, colourless to pale, viscousClear, colourless, viscous
Key controlled impuritiesSolids, iron, aluminium, magnesium, fluoride, sulphateIron, chloride, sulphate, heavy metalsArsenic, lead, cadmium, fluoride, heavy metals, plus the technical parameters
Reference standardContract specificationProducer specification or national technical standardFood Chemicals Codex or local food additive standard (E338)
Main usesMAP, DAP, TSP, NPK granulationMetal treatment, detergents, water treatment, chemical synthesisBeverages, food phosphates, food plant cleaning
Usual deliveryBulk tankers, lined road and rail tanksCans, drums, IBCs, ISO tanksDrums, IBCs, ISO tanks dedicated to food

Converting between P2O5 and H3PO4

Because fertilizer acid is quoted as P2O5 and technical and food acids as H3PO4, comparisons need a conversion. One molecule of P2O5 corresponds to two of H3PO4, so multiplying the H3PO4 percentage by about 0.724 gives the P2O5 percentage. On that basis 85% H3PO4 is roughly 61.6% P2O5, and 75% H3PO4 is roughly 54.3% P2O5. Merchant-grade acid at 52–54% P2O5 is therefore similar in strength to 75% technical acid, but very different in purity.

Choosing the right grade

  • Fertilizer manufacture: MGA. Paying for purified acid adds cost with no benefit to the granule.
  • Metal pickling, phosphating, detergents, industrial pH control: technical grade. The 85% strength is common; 75% is easier to handle in cold climates.
  • Anything that ends up in food, drink or animal feed: food grade, backed by documents that cite the applicable monograph.
  • Pharmaceutical or laboratory use: higher pharmacopoeia or reagent grades exist and are specified separately.
Grade names describe purity, not strength. Always state both the grade and the concentration in an enquiry.

Hazards common to all grades

All grades are corrosive (UN 1805, transport class 8) and cause severe skin burns and eye damage. They react with many metals to release flammable hydrogen and react strongly with alkalis. Merchant-grade acid also contains fluoride. The product safety data sheet should be the reference for handling, PPE and first aid.

What to include in an enquiry

State the grade, the concentration and how it is expressed, the impurity limits that matter for your process, the standard or monograph it must meet, packing and volume, and the delivery terms. Ask for a certificate of analysis per batch. Nuroil supplies phosphoric acid on request and can provide the CoA with every delivery, with the MSDS, certificate of origin and third-party inspection on request. Send your details through the quote request form.

PRODUCTS IN THIS GUIDE
KEEP READING

More from the knowledge centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote