Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Guide3 min read6 sections

Knowledge centre · Industrial chemicals

Packing and transport classification for industrial ethanol

Drums, IBCs and ISO tanks for industrial ethanol, its UN 1170 dangerous goods classification, and what the shipping documents should show.

Written by the Nuroil trade desk, Sharjah

On this page · 6 sections
  1. 01Dangerous goods classification
  2. 02Packing options compared
  3. 03Protecting quality in transit
  4. 04Labels and marks
  5. 05Documents to expect
  6. 06Getting a quotation

Industrial ethanol is shipped as a dangerous good in every common transport mode. Choosing the right packing affects not only cost but also what your receiving site must be able to handle, and how much moisture or contamination the product can pick up on the way. This guide covers the classification, the main packing options, and the documents that should accompany a shipment.

Dangerous goods classification

Ethanol and its solutions are classified as flammable liquids:

  • UN number: UN 1170
  • Proper shipping name: ETHANOL (ETHYL ALCOHOL) or ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
  • Class: 3 (flammable liquid)
  • Packing group: II for concentrated grades

Denatured ethanol may be shipped under UN 1170 or, depending on the denaturant and its quantity, under another entry such as UN 1987 (alcohols, n.o.s.). Weak aqueous solutions can fall into a different packing group or, at low strengths, outside the regulations. The correct entry for a particular product is given in section 14 of its SDS and must match the documents and labels. For sea transport, the IMDG Code applies; for road and rail, the relevant regional rules.

Packing options compared

PackingTypical net contentBest suited toPoints to check
Steel drumsAbout 160–170 kg (200 L drum)Small and medium users, pharmaceutical and hygiene plants, mixed loadsUN-approved for Class 3 PG II, closed head, lined if purity critical
HDPE drumsUp to about 200 LUsers wanting lighter, corrosion-free containersUN approval, compatibility, static precautions when emptying
IBCsAbout 800 kg (1,000 L)Regular medium-volume users with forklift handlingMust be approved for flammable liquids; earthing arrangements
ISO tank containersAbout 18–21 tonnesLarge users with bulk storage tanksDedicated or cleaned tank history, nitrogen blanket for anhydrous grades, discharge equipment at site

Exact fill weights depend on the grade, the container and the requirement to leave ullage for thermal expansion. Ethanol expands noticeably when warmed, so containers must never be filled to the brim, particularly for shipments passing through hot climates.

Protecting quality in transit

  • Moisture: anhydrous grades absorb water. Sealed drums and nitrogen-blanketed tanks help preserve the certified water content.
  • Contamination: bulk tanks should be dedicated to ethanol or carry a cleaning certificate showing the previous cargo and cleaning method.
  • Container linings: for pharmaceutical and hygiene grades, ask about drum linings and gasket materials to avoid extractables.
  • Temperature: shade containers in ports and yards where possible. Heat increases internal pressure and vapour loss.

Labels and marks

Each package should carry the UN number and proper shipping name, the Class 3 flammable liquid label, and the GHS label required in the destination market. ISO tanks and transport units display placards and UN numbers as required by the mode of transport. Check that marks are legible on arrival; damaged or missing labels can delay customs clearance. Shipping lines and some ports also set their own acceptance conditions for Class 3 cargo, so confirm bookings early, particularly for full ISO tank loads.

Match packing to your receiving capability first: an ISO tank is only economical if your site can unload it safely into suitable storage.

Documents to expect

  • Commercial invoice and packing list, showing grade, net and gross weights.
  • Dangerous goods declaration with the UN number, class and packing group.
  • Certificate of analysis for each lot.
  • Safety data sheet, current and in the required language.
  • Certificate of origin and third-party inspection report, where needed.
  • Any excise, denaturing or end-use documents required by your country for non-beverage alcohol.

Getting a quotation

Tell us the grade, packing type, quantity per shipment, destination port and preferred terms (FOB, CFR or CIF). Nuroil ships from UAE ports, provides a CoA with every delivery, and can supply SDS, certificate of origin and inspection on request. Use the quote request form to start.

KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote