Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read4 sections

Knowledge centre · Industrial chemicals

Anhydrous ammonia in cylinders, ISO tanks or bulk: choosing a supply format

How refrigeration plants choose between cylinders, drums, ISO tanks and road tankers for anhydrous ammonia, and what each demands of the site.

Written by the Nuroil trade desk, Sharjah

On this page · 8 sections
  1. 01The main formats
  2. 02Cylinders
  3. 03Drums and ton containers
  4. 04ISO tank containers
  5. 05Road tankers (bulk)
  6. 06Questions to decide the format
  7. 07Safety in every format
  8. 08Enquiring about supply

Anhydrous ammonia reaches users in pressurised containers that range from small cylinders to road tankers and ISO tank containers. For a refrigeration plant, the right format depends on how much ammonia is needed, how often, and what receiving equipment and trained people the site has. Choosing well reduces handling, cost per kilogram and, most importantly, the number of connections and disconnections where releases can occur.

The main formats

Cylinders

Cylinders hold anywhere from a few kilograms to around 50–70 kg of liquefied ammonia, depending on the design. They suit small systems, top-ups after maintenance, laboratories and sites without bulk storage. Each cylinder change involves connecting and venting a line, so many small cylinders mean many handling events. Cylinders must be secured upright or as the supplier specifies, kept out of direct sun, and stored away from heat sources and incompatible materials.

Drums and ton containers

Larger returnable pressure vessels, often holding several hundred kilograms, sit between cylinders and bulk. They reduce the number of changes for medium users but need lifting equipment and a suitable storage area with restraint.

ISO tank containers

ISO tanks are pressure tanks mounted in a standard container frame. They are used for international shipments and for larger users who receive full or part loads. A tank may be discharged at the site into the plant's receiver or a storage vessel, or in some arrangements kept on site as temporary storage. The site needs space for the container, safe access, a means of transferring liquid, and procedures for connecting and venting hoses.

Road tankers (bulk)

Large plants with high-pressure receivers or storage vessels can take bulk deliveries by road tanker, which pumps liquid ammonia into the plant. This is the lowest-handling option per kilogram but requires a designed unloading point, hose management and written procedures.

FormatTypical userSite requirementsMain trade-off
CylindersSmall systems, top-upsSecure storage, charging line, venting pointMany connections per tonne
Ton containersMedium systemsLifting gear, restraint, ventilated storeHeavier handling, returnable logistics
ISO tankLarge users, importsHard standing, transfer system, trained staffHigher site capability needed
Road tankerLarge plants with storageUnloading point, hoses, level gaugingRequires designed infrastructure

Questions to decide the format

  • System charge and annual make-up: a new system's initial charge may justify bulk, while yearly make-up may be cylinder-sized.
  • Receiving capacity: the receiver or storage vessel must have room for the delivery without overfilling. Check level gauges before any transfer.
  • Infrastructure: a bulk delivery needs an accessible, designed connection point; cylinders need a safe charging connection and venting arrangement.
  • People and procedures: each format needs written operating procedures and trained staff. Larger quantities also bring stricter regulatory requirements at many sites.
  • Purity: ammonia should come from a container dedicated to the required grade, so that it is not contaminated with water or oil.
Every connection and disconnection is a release risk. Choose the format that gives the fewest safe handling events your site can properly support.

Safety in every format

Regardless of container size, good practice includes securing containers, using hoses designed for ammonia and inspecting them regularly, never leaving a transfer unattended, emptying and venting lines before disconnecting, and not standing in line with any venting point. Staff connecting and disconnecting should wear the PPE set out in the site procedure and the SDS. Anhydrous ammonia is toxic and corrosive; follow the product SDS in all cases.

Enquiring about supply

Tell us the grade required, the format, the quantity per delivery and per year, your receiving equipment, and the destination. Ask for a certificate of analysis for each lot and confirmation of container type and test status. Nuroil sources from established producers and supplies CoA with every delivery, with SDS and third-party inspection on request. Start through our quote request form.

KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote