Ethyl acetate is used well beyond paints and inks. It extracts caffeine from coffee and tea, carries flavours, serves as a reaction and crystallisation solvent in pharmaceutical plants and appears as a solvent in some cosmetic products. In these uses the solvent, or traces of it, can end up in something people eat, drink or take as medicine, and the grade has to match.
What changes between grades
Chemically the substance is the same. The differences lie in how tightly impurities are controlled, which standard the material is certified against and what documentation comes with it.
- Technical or industrial grade is typically 99.5% or higher and is specified against a solvent standard such as ASTM D4614, with limits on water, acidity, alcohol content, colour and non-volatile residue.
- Food grade is certified against a food additive or flavouring specification, such as the JECFA monograph or the Food Chemicals Codex. These cover identity, assay, acid value and residue on evaporation, and add tests aimed at harmful impurities, for example a check for methyl compounds.
- Pharmaceutical grade is certified to a pharmacopoeia monograph (such as USP-NF or the European Pharmacopoeia). It is normally produced and handled under recognised quality systems with change control and traceability.
The standards in brief
The JECFA specification for ethyl acetate sets an assay of not less than 99.0% and an acid value of not more than 5.0. Producers' food-grade sales specifications are often tighter, with assays near 99.8% and a low limit on residue on evaporation. In the European Union, ethyl acetate is one of the extraction solvents permitted for all food uses, provided it is used in line with good manufacturing practice so that only technically unavoidable traces remain.
In medicines, the ICH Q3C guideline on residual solvents places ethyl acetate in Class 3, the group with low toxic potential. A residue of up to 5,000 ppm (0.5%) in a drug product is generally acceptable without further justification, although regulators may expect tighter limits where manufacturing data show lower levels are routinely achieved.
Why a technical grade is not a shortcut
A technical drum may well test above 99.5% purity, but that alone does not make it suitable for food or pharmaceutical use. Three things are usually missing:
- The right tests. Food and pharmacopoeia monographs include identity and impurity tests that a solvent-grade CoA does not report.
- Clean, dedicated logistics. Food and pharma grades need packaging and tankers that have not carried incompatible or toxic products. A drum that previously held another chemical is not acceptable.
- Documentation. Auditors expect a supplier qualification file, a certificate that names the monograph, and often statements on allergens, residual solvents and origin of the material.
For food and medicines, the grade is defined as much by the paperwork and the supply chain as by the purity figure.
Typical users
- Coffee and tea processors running ethyl acetate decaffeination.
- Flavour houses using it as a carrier or flavour component.
- Pharmaceutical and active ingredient manufacturers using it for extraction, crystallisation and washing.
- Cosmetic manufacturers, for example in nail lacquer and remover formulations.
What to specify when buying
Name the exact grade and monograph (for example food grade to JECFA or FCC, or pharmaceutical grade to a named pharmacopoeia) rather than just "high purity". Ask for a CoA that reports results against that monograph, confirm the packaging type and whether it is new and dedicated, and request any statements your quality team needs before the first order. Nuroil supplies a CoA with every delivery and can provide the CoO and SDS and arrange inspection on request. Share your requirements through the quote request form or contact us to discuss documentation.
