Ethyl acetate moves internationally as a dangerous good, and the packing you choose affects cost per tonne, product quality on arrival and how easily your site can receive and store it. This guide compares the usual options and outlines the transport requirements buyers should expect to see on the paperwork.
Transport classification
Ethyl acetate is shipped under UN 1173, Class 3 (flammable liquid), packing group II. Packaging must be UN-approved for liquids of that group, containers must carry the Class 3 label and UN number, and the shipping documents must include a dangerous goods declaration. For sea freight the IMDG Code applies; road legs follow national or regional rules such as ADR. Shipping lines may also apply their own acceptance conditions for flammable cargo.
Packing options compared
| Packing | Typical content | Best suited to | Points to watch |
|---|---|---|---|
| Steel drums (about 200 litres) | roughly 180 kg net, since the liquid weighs about 0.9 kg per litre | Distributors, small and medium users, sites without bulk tanks | Need sound closures and gaskets; earthing during decanting; drum handling equipment |
| IBCs (about 1,000 litres) | roughly 900 kg net | Users consuming several tonnes a month who can decant safely | Must be approved for flammable liquids; check earthing arrangements and valve compatibility |
| ISO tank containers | bulk, often around 20 tonnes depending on tank size and route limits | Plants with bulk storage and suitable unloading facilities | Tank cleanliness certificate, previous cargo, dedicated hoses, nitrogen padding if requested |
Drums: practical details
Steel drums remain the default for ethyl acetate export. Tight-head drums with two bungs are standard. Some buyers request internally lined drums to reduce the chance of iron pick-up or colour change, particularly for high-purity or food grades. Plastic drums are used for some solvents, but they must be specifically approved for the product and packing group, and they are harder to earth during transfer. Drums are normally palletised and secured with strapping or shrink wrap, with dunnage to prevent movement in the container. Ask for net weight per drum and the number of drums per container; the payload is usually limited by weight rather than space.
Bulk by ISO tank
An ISO tank removes the handling and disposal cost of drums and reduces the risk of contamination from repeated decanting. It makes sense when your site has a storage tank, an unloading point with earthing and vapour control, and steady consumption. Ask for the tank's cleaning certificate and previous cargoes; a tank that last carried a non-volatile or strongly coloured product can leave traces that show up as residue or colour. Some buyers specify nitrogen padding to keep moisture out on long voyages.
Protecting quality in transit
- Containers standing in hot ports or sun-exposed yards warm up, increasing pressure in drums. Sound closures and gaskets prevent loss and moisture ingress.
- Avoid mixed loads with oxidisers or corrosive cargo in the same container.
- Seal numbers on the container and, for tanks, on valves and manholes should be recorded on shipping documents and checked on arrival.
Choose the packing your site can unload safely, not just the one with the lowest freight cost per tonne.
Receiving checks
- Compare container and seal numbers with the bill of lading.
- Inspect drums or IBCs for dents, leaks and damaged closures before unloading into the store.
- Check labels, UN numbers and batch numbers against the CoA.
- Take a sample for water, acidity and purity if your process is sensitive.
- Earth the container or tank before any transfer.
What to include in your enquiry
State the grade, quantity, preferred packing, destination port and Incoterm (FOB UAE, CFR or CIF). Mention any requirements for lined drums, nitrogen padding or dedicated tanks. Nuroil supplies a CoA with every delivery and can provide CoO, SDS and third-party inspection on request. Send details through the quote request form.
