Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read6 sections

Knowledge centre · Industrial chemicals

Crude glycerine and refined glycerine: what separates them

5% glycerine in content, impurities, uses and how it is bought.

Written by the Nuroil trade desk, Sharjah

On this page · 6 sections
  1. 01Where crude glycerine comes from
  2. 02What refining removes
  3. 03Technical grade and pharmacopoeia grade
  4. 04Handling differences
  5. 05Risks of buying the wrong one
  6. 06Buying either form

Glycerine is traded in two very different forms. Crude glycerine is a by-product stream that still carries salts, water, methanol and organic residues. Refined glycerine is a clear, nearly pure liquid sold to pharmaceutical, personal care, food and chemical users. Buyers sometimes treat them as cheaper and dearer versions of the same thing, but they are different products with different specifications, uses and risks.

Where crude glycerine comes from

Glycerine is released whenever fats and oils are split. The main sources are:

  • Biodiesel production. Oils are reacted with methanol and a catalyst; glycerine separates as a heavy layer containing methanol, catalyst salts, soaps and water.
  • Soap making. Saponification leaves glycerine in the spent lye, along with salt.
  • Fat splitting. Hydrolysis of fats to make fatty acids gives a cleaner, salt-free "sweet water" glycerine.

Industry data put crude glycerine anywhere from about 40% to 88% glycerol depending on source and how much methanol and water have been stripped.

What refining removes

Refining turns crude into technical or pharmacopoeia grade by neutralising, removing salts and fatty matter, stripping water and methanol, distilling under vacuum and polishing with activated carbon. Distilled glycerine from such units is commonly offered at 99.5% minimum glycerol. Our separate article on how crude glycerine is refined covers the steps in more detail.

PointCrude glycerineRefined glycerine (99.5%)
Glycerol contentRoughly 40 to 88%99.5% or higher
AppearanceYellow to dark brown, may be cloudyClear, colourless, odourless
Main impuritiesWater, salts (ash), methanol, soaps, fatty matter (MONG)Traces only, controlled by specification
Typical buyersRefiners, some chemical and energy uses, some feed uses after treatmentPersonal care, pharmaceutical, food, resins, technical uses
Key testsGlycerol, water, ash, MONG, methanol, pHAssay, water, colour, chlorides, sulphates, residue on ignition, DEG/EG

Technical grade and pharmacopoeia grade

Within refined glycerine there is a further split:

  • Technical (industrial) grade is high-purity glycerine used in resins, coatings, explosives manufacture, antifreeze blends, tobacco, and as a chemical intermediate. It may be distilled to high purity but is not certified to a pharmacopoeia.
  • USP, Ph. Eur. or BP grade meets a pharmacopoeia monograph and is used in medicines, toothpaste, cosmetics and many hygiene products. It is tested for an extended list of impurities, including diethylene glycol and ethylene glycol.

The same 99.5% purity figure can appear on both, so the grade standard on the CoA matters more than the purity number alone. Food-grade glycerine sits alongside these and follows the food regulations of the market where it is used.

Handling differences

Crude glycerine may separate in storage, with fatty matter rising and salts settling, so tanks are usually circulated before sampling or discharge. Its pH and salt content can make it more corrosive than refined glycerine, and any methanol affects flash point. Refined glycerine is stable but hygroscopic, so the priority is keeping it sealed and dry and avoiding overheating that raises colour.

Risks of buying the wrong one

  • Crude glycerine from biodiesel can contain methanol, which matters for both safety and the user's process.
  • High salt in soap-lye crude fouls equipment and limits uses.
  • Technical grade used in a cosmetic or medicine may not meet the regulatory requirements for that product, even if it looks identical.
Ask what the glycerine will be used for before you ask its purity; the grade standard decides fitness for use.

Buying either form

For crude, specify glycerol, water, ash, MONG, methanol and pH limits, and the source (biodiesel, soap or fat splitting). For refined, specify grade (technical or USP/Ph. Eur.), minimum assay and colour. Nuroil supplies glycerine on request with a CoA for each delivery; describe your application through request a quote.

KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote