Buying anhydrous ammonia for a refrigeration plant is different from buying most industrial chemicals. The product is a toxic, corrosive liquefied gas; the containers are pressure equipment; and the receiving site has to be ready to accept it safely. A clear enquiry that covers specification, containers, site readiness and documents avoids delays and makes sure the right product arrives. This checklist is designed for plant engineers, refrigeration contractors and procurement teams.
1. Specification
- Grade: refrigeration grade, usually 99.95% or 99.98% minimum ammonia.
- Maximum water content, stated in % or ppm.
- Maximum oil or non-volatile residue.
- Any limit on non-condensable gases if your designer or operator requires it.
- The standard or internal specification the product must meet.
2. Quantity and timing
- Initial charge for a new system, or top-up quantity for an existing one.
- Expected annual consumption, which helps choose between cylinders and bulk.
- Required delivery date, particularly if tied to commissioning.
- Whether deliveries should be split to match available receiver space.
3. Containers
| Question | Why it matters |
|---|---|
| Cylinders, ton containers, ISO tank or tanker? | Must match site equipment and handling capability |
| Are containers dedicated to ammonia service? | Protects purity; avoids oil and water carry-over |
| Are test dates current? | Required for legal transport and safe use |
| Valve and connection type? | Must fit your charging connections and hoses |
| Are containers returnable, and on what terms? | Affects logistics, deposits and storage space |
4. Site readiness
Before ordering, confirm that the receiving site can accept the delivery safely. Workplace safety guidance for ammonia receiving highlights written operating procedures, trained staff, suitable hoses, wheel chocks, level checks before transfer, and venting of lines before disconnection.
- Written procedures for receiving and charging, reviewed and current.
- Trained staff available for the delivery window.
- Room in the receiver or storage vessel for the full delivery.
- Ammonia-rated hoses in good condition and within inspection dates.
- PPE, emergency shower, eyewash and ammonia detection working.
- A secure, shaded, ventilated area for cylinders if they will be stored.
5. Commercial and delivery terms
- Incoterm: FOB, CFR or CIF, and named port or place.
- Who arranges inland transport and unloading at site.
- Responsibility for empty container return.
- Import permits or registrations required for toxic gases in your country.
6. Documents
- Certificate of analysis for the lot, showing ammonia, water and oil.
- Safety data sheet in the language your staff use.
- Dangerous goods declaration for UN 1005, class 2.3 with subsidiary 8.
- Container test certificates.
- Certificate of origin and third-party inspection report where required.
The best time to find a mismatch between container fittings and your charging connection is when you write the enquiry, not when the truck arrives.
7. Quality on receipt
Check that labels, UN numbers and lot numbers on the containers match the documents. Inspect containers for damage and valve condition. Keep certificates with your plant records so that, if a water or oil problem appears later, you can trace the ammonia that went into the system. If independent sampling is required, arrange an inspector with proper equipment for sampling liquefied gas under pressure.
It is also worth recording the quantity actually received, by weighing cylinders or reading receiver levels before and after transfer. Comparing this with the invoiced quantity helps reconcile deliveries, and a running record of ammonia added over the years is useful evidence when investigating leaks or planning maintenance. Store empty cylinders separately from full ones, with valves closed and caps fitted, until they are collected.
Working with Nuroil
Nuroil is a trader based in Sharjah, UAE, sourcing from established producers and supplying worldwide on FOB, CFR or CIF terms. We provide a CoA with every delivery, with CoO, SDS and third-party inspection on request. Send your checklist answers through the quote request form, or contact us to discuss containers and delivery options.
