Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Expert article3 min read6 sections

Knowledge centre · Water & pool treatment

Chlorine disinfection options compared for water and wastewater

Chlorine gas, sodium hypochlorite, calcium hypochlorite and TCCA compared on strength, stability, handling and what each adds to the water.

Written by the Nuroil trade desk, Sharjah

On this page · 6 sections
  1. 01How chlorine compounds work
  2. 02The main options
  3. 03Gas versus hypochlorites
  4. 04Where TCCA fits
  5. 05Wastewater specifics
  6. 06Specifying a chlorine product

Chlorine remains the most widely used disinfectant in water and wastewater treatment, mainly because it leaves a measurable residual that keeps protecting water after it leaves the plant. UV and ozone inactivate microorganisms well but leave no residual, so they are usually paired with a chlorine step. The question for most plants is not whether to use chlorine but which chlorine compound.

How chlorine compounds work

Whatever form it is supplied in, chlorine added to water ends up as hypochlorous acid and hypochlorite ion. Together these are measured as free chlorine. Hypochlorous acid is the more powerful disinfectant, and its share falls as pH rises, so pH control and chlorine dosing go together. The amount of chlorine needed also depends on chlorine demand: organic matter, ammonia, iron and other reducing substances consume chlorine before any residual remains.

Because of this, the compounds below differ less in how they kill microorganisms than in their strength, their stability in storage, how safely they can be handled and what else they add to the water.

The main options

CompoundFormTypical strengthEffect on waterKey considerations
Chlorine gasLiquefied gas in cylinders or tonnersEssentially pure chlorineLowers pH and alkalinityLowest cost per kg of chlorine at large scale; toxic gas hazard needs leak detection, scrubbers and trained staff.
Sodium hypochloriteLiquidCommonly 10 to 15% as suppliedRaises pH slightly; adds sodiumEasy to meter; loses strength in storage, faster when warm, and forms chlorate as it degrades.
Calcium hypochloriteGranules or tabletsAbout 65 to 70% available chlorineRaises pH; adds calciumStable when kept dry and cool; strong oxidiser; can leave insoluble residue and scale in feeders.
Trichloroisocyanuric acid (TCCA)Tablets, granules, powderAbout 90% available chlorineLowers pH; adds cyanuric acidSlow, steady release from tablets; cyanuric acid builds up, which suits outdoor pools more than most water systems.

Gas versus hypochlorites

Large municipal plants have historically used chlorine gas because it is concentrated and economical. Its drawback is the hazard of a toxic gas release, which brings strict requirements for storage rooms, detection and emergency response. Many plants and nearly all small systems use hypochlorites instead, accepting a higher chemical cost in exchange for simpler and safer handling.

Sodium hypochlorite is the most common replacement. It is fed with ordinary metering pumps from plastic or fibreglass tanks. Its weakness is stability: the solution decomposes over weeks, so plants buy in quantities they will use quickly, store it out of the sun and keep it cool. Decomposition also produces chlorate, a by-product that regulators increasingly watch.

Calcium hypochlorite is the solid alternative. Because it is dry and concentrated, it travels and stores well, which makes it popular for remote sites, emergency disinfection, well and tank disinfection, and small or onsite wastewater systems where tablet feeders are used. It must be kept dry, cool and away from acids and organic material, because contamination or heat can start a self-accelerating decomposition.

Where TCCA fits

TCCA carries the most available chlorine of the common solids and dissolves slowly, which suits erosion feeders and floating dispensers. Each dose also adds cyanuric acid, which binds part of the chlorine and slows disinfection. That trade-off is acceptable, and often helpful, in sunlit outdoor pools where cyanuric acid protects chlorine from ultraviolet breakdown. It is less suited to drinking water or wastewater, and use in those applications depends on local approvals.

Wastewater specifics

Effluent disinfection needs rapid, thorough mixing followed by a contact tank that gives enough time at the required residual. Chlorine demand in wastewater is far higher than in clean water and varies with treatment quality. Because chlorine residuals are toxic to aquatic life, many permits require dechlorination before discharge, usually with a sulphur-based reducing agent.

Choose the chlorine compound for handling, stability and what it adds to the water. Once dissolved, they all disinfect as free chlorine.

Specifying a chlorine product

When you enquire, state the compound and form, the minimum available chlorine, any limits on insolubles or moisture, the packing and the destination. For solid hypochlorites and TCCA, confirm the UN number and class on the shipping documents, and ask for the safety data sheet and a certificate of analysis for each lot. Nuroil can supply calcium hypochlorite and TCCA for treatment applications on request; see the water treatment page or request a quote.

KEEP READING

More from the Knowledge Centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote