Sodium bisulphate is a single compound, but it reaches buyers in several forms and grades. A pool distributor, a detergent blender and a food manufacturer may all order "sodium bisulphate" and need quite different products. This guide sets out the forms, the grades and the parameters that appear on a typical specification sheet, so that an enquiry can be precise.
Basic identity
Sodium bisulphate (sodium hydrogen sulphate, NaHSO₄) is the sodium salt of the bisulphate ion. It exists as an anhydrous solid and as a monohydrate, and the two have different CAS numbers, so documents should name which one is supplied.
| Property | Anhydrous | Monohydrate |
|---|---|---|
| Formula | NaHSO₄ | NaHSO₄·H₂O |
| CAS number | 7681-38-1 | 10034-88-5 |
| Molar mass | 120.06 g/mol | 138.07 g/mol |
| Density | 2.742 g/cm³ | about 1.8 g/cm³ |
| Melting behaviour | Melts at about 315 °C | Loses its water at about 58 °C |
| Solubility in water | About 28.5 g per 100 mL at 25 °C, rising steeply with temperature |
Heated strongly, sodium bisulphate loses water and converts to sodium pyrosulphate, so it should not be dried at high temperature. The anhydrous form is hygroscopic and will take up moisture from humid air.
How it is made
The main commercial route reacts sodium chloride with sulphuric acid. The reaction is strongly exothermic; the molten bisulphate is sprayed and cooled into solid beads, and the hydrogen chloride released is absorbed in water and sold as hydrochloric acid. It can also be produced by partly neutralising sulphuric acid with a sodium base, or as a by-product of other processes that use excess sulphuric acid. The route affects trace impurities such as chloride and iron, which is one reason producers' specifications differ.
Physical forms
- Granular or beaded: the usual form for pools and spas. Low dust, free-flowing, easy to broadcast or pre-dissolve.
- Fine or powder: used where it must blend evenly into other powders, such as cleaning formulations and some food mixes. Dustier and more prone to caking.
- Solutions: some users buy or make aqueous solutions for metering. These are corrosive liquids and are classed and shipped differently from the dry solid.
Grades
- Technical (industrial) grade: pools, cleaning products, metal treatment and general pH adjustment.
- Drinking-water grade: technical product certified for use in potable water treatment, often requested by public pool and water utilities.
- Food grade: made and documented to food additive purity criteria (E514(ii) in the EU), with limits on heavy metals and other contaminants.
- Feed grade: documented for animal feed use, for example as an acidifier or in poultry litter treatment.
Parameters on a specification sheet
| Parameter | What it tells you |
|---|---|
| Assay (NaHSO₄ content), % | The active acid content. Higher assay means less product for the same pH change. |
| Free acidity or total acidity | Sometimes reported as equivalent sulphuric acid; another measure of strength. |
| Water-insoluble matter, % | Solids that will not dissolve and end up in filters or as cloudiness. |
| Moisture or loss on drying, % | Indicates water pick-up and the risk of caking. |
| Iron (Fe), ppm | Can stain pool surfaces and contaminate plating baths. |
| Heavy metals, lead, arsenic | Critical for food, feed and drinking-water grades. |
| Chloride | A trace of the production route; relevant for some metal treatment uses. |
| Particle size distribution | Determines dust, dissolving speed and blending behaviour. |
| Appearance | Usually white granules or crystals; discoloration may indicate iron. |
Two lots can both be "sodium bisulphate" and still differ in assay, insolubles and iron. Agree the numbers, not just the name.
Hazard classification
Sodium bisulphate carries the corrosive pictogram and the signal word "Danger" for serious eye damage under the GHS. Classification for transport depends on the form; dry solid and aqueous solution are treated differently, so the supplier's SDS is the reference for labelling and shipping.
Writing the enquiry
State the grade, the form (granular or fine), the minimum assay and maximum insolubles you need, any metal limits, the packing and the destination. Ask for a certificate of analysis with each lot, the SDS, and where relevant food, feed or drinking-water documentation and a certificate of origin. Nuroil supplies sodium bisulphate on request; send these details through the quote form.
