Calcium hypochlorite is a solid, concentrated chlorine source that keeps far better than liquid sodium hypochlorite. It is not permanent, however. Every drum loses some available chlorine over time, and in poor conditions the loss can be fast and the product can become hazardous. This guide explains what drives the decline and how buyers and stockists can limit it.
Normal loss under good conditions
Even sealed and kept at ordinary temperatures, calcium hypochlorite decomposes slowly. Patent literature on calcium hypochlorite compositions reports a loss in the order of a few per cent of available chlorine per year under normal ambient storage. That is small enough that well-stored product remains useful for a long time, but it means a drum held for a couple of years will not match the strength on its original certificate.
What speeds up the loss
| Factor | Effect |
|---|---|
| Heat | Decomposition accelerates as temperature rises; manufacturer labels warn that sustained high temperatures over several days can start decomposition |
| Moisture | Water greatly speeds breakdown; in wet slurries the loss is measured per hour rather than per year |
| Contamination | Organic matter, acids and reducing agents react with the product, generating heat and gas |
| Open or damaged packing | Lets in humid air and contaminants |
Patent data on calcium hypochlorite in water show decomposition of about 1% of the active chlorine per hour at 30 °C, roughly doubling for each further 10 °C. The same work notes that thermal stability improves as the water content of the solid is reduced. This is why the dry product must stay dry: once moisture gets in, temperature becomes far more damaging.
Why strength loss can become a safety issue
Decomposition releases oxygen and heat. In a closed container, gas pressure can build up, and a manufacturer label for a dry calcium hypochlorite product warns that a sealed container exposed to heat can rupture. If contamination or moisture starts a reaction, the heat released can accelerate decomposition further and, with combustible material nearby, lead to fire. The International Chemical Safety Card describes calcium hypochlorite as a strong oxidant that enhances the combustion of other substances and decomposes rapidly with acids, releasing chlorine.
Storage practices that protect strength
- Keep it cool. Shaded, ventilated storage, away from direct sun, roofs that heat up, boilers and steam lines.
- Keep it dry. Lids tight, liners intact, pallets off the floor, no wash-down nearby.
- Keep it clean. Dedicated dry scoops; never return product to the drum; no oils, fuels, paper or cleaning chemicals nearby.
- Keep it separate. Away from acids, ammonium compounds, TCCA and other chlorine products, fertilizers and combustibles, and from food and feed.
- Rotate stock. First in, first out by production date.
Warning signs in stored product
- Bulging or warm containers.
- Strong chlorine odour, yellowing or caking.
- Damp patches or crusting around lids.
Do not open a bulging or warm container in a confined space. Isolate it in a ventilated area, keep people away and follow the emergency measures in the safety data sheet; for fire involving calcium hypochlorite, safety cards advise large amounts of water rather than dry powder.
Cool, dry, clean and separate: calcium hypochlorite kept this way loses only a little strength a year; let water or heat in and the loss, and the risk, multiply.
Checking stock that has been held
For product held for a long period or in uncertain conditions, test available chlorine before use and recalculate doses from the measured value. For water treatment, where the dose matters, this avoids under-chlorination.
Planning purchases
Buy volumes that will be used within a reasonable period, schedule deliveries to avoid long dwell times in hot ports or yards, and ask for the production date and available chlorine on the certificate of analysis. Packing with good moisture barriers matters most in humid climates. Nuroil supplies calcium hypochlorite on request with a CoA and safety data sheet; send your requirement through the request a quote page.
