Technical document

· PDF

Tell us who you are and the document downloads straight away. We use these details only to follow up on your requirement.

Samples & documents

What can we send you?

Tick what you need
Request a quote
Guide3 min read7 sections

Knowledge centre · Water & pool treatment

Testing calcium hypochlorite: available chlorine, insolubles and moisture

A reference on the laboratory tests behind a calcium hypochlorite certificate of analysis, how samples should be taken, and how to read the results.

Written by the Nuroil trade desk, Sharjah

On this page · 7 sections
  1. 01Available chlorine by iodometric titration
  2. 02Other parameters and why they matter
  3. 03Sampling correctly
  4. 04Reading the results
  5. 05Field checks of solutions
  6. 06Laboratory safety
  7. 07Documents to request

A certificate of analysis (CoA) for calcium hypochlorite usually leads with one number, available chlorine, but the quality of a delivery also shows in its insoluble matter, water content and physical form. This guide explains the main tests, how they are carried out in outline and what the results mean for users in pools and water treatment.

Available chlorine by iodometric titration

Available chlorine is determined by iodometric titration. ASTM D2022, which covers sampling and chemical analysis of chlorine-containing bleaches, includes a method for calcium hypochlorite. In outline:

  1. A weighed, representative sample is dissolved or dispersed in water.
  2. Potassium iodide and acid are added; the hypochlorite oxidises iodide to iodine in an equivalent amount.
  3. The liberated iodine is titrated with standardised sodium thiosulfate, using starch indicator near the end point.
  4. Available chlorine is calculated from the titrant used and the sample weight.

The method measures total oxidising capacity, so certain other oxidising species, such as chlorite, are included in the result. Commercial products are normally specified at around 65 to 70% available chlorine.

Other parameters and why they matter

ParameterWhat it tells the user
Available chlorine (%)Strength and dosing basis
Insoluble matterSediment in stock solutions, residue in feeders and pools
Water contentStability, and the basis for hydrated grade classification
Particle size distributionDissolving speed, dust, suitability for feeders
Tablet weight (for tablets)Fit and consistent output in feeders
AppearanceWhite to off-white, free of foreign matter
Heavy metals (drinking water grades)Compliance with drinking-water chemical standards

Standards such as EN 15796 for pool use and AWWA B300 for water treatment set out characteristics and test methods; buyers in those sectors often call them up in the specification.

Sampling correctly

Results are only as good as the sample. Calcium hypochlorite is moisture sensitive and reactive, so:

  • Take samples from several containers across the lot.
  • Use clean, dry, dedicated non-metallic scoops; never a tool that has touched another chemical.
  • Fill clean, dry glass or compatible plastic jars and close them at once; do not seal hot or reacting material.
  • Label with batch, container number, date and sampler, and keep a sealed retained sample cool and dark.
  • Transport samples as the hazardous material they are, following the safety data sheet.

Reading the results

  • Available chlorine slightly below specification: possible decomposition in transit or storage, or a weak batch. Check production date and storage history.
  • High insolubles: expect more sediment and residue; may block feeders and injectors.
  • High water content: weaker stability; strength may fall faster in storage.
  • Wide particle size spread or many fines: dust and uneven dissolving.

Small differences between a supplier's CoA and an independent result are normal, given sampling and time between tests. A consistent gap, or a large one, warrants a joint retest of retained samples.

Field checks of solutions

On site, the strength of a prepared stock solution can be checked with a high-range chlorine test, diluting the sample so it falls within the kit's range. DPD-based tests can be bleached by high chlorine, giving falsely low readings, which is why dilution matters.

Ask what method produced the figure on the certificate, and test retained samples the same way when results are disputed.

Laboratory safety

The titration acidifies the sample, which releases chlorine, so it should be done in small quantities, in a fume cupboard or well-ventilated area, by trained staff. Never mix calcium hypochlorite residues with other chemicals in waste containers.

Documents to request

Ask for a batch CoA showing available chlorine, insolubles and water content with the test methods, the safety data sheet, and, where required, evidence of compliance with a drinking-water standard. Independent inspection and sampling at loading can be arranged. Nuroil provides a CoA with every delivery, with third-party inspection on request; contact us via the contact page.

KEEP READING

More from the knowledge centre.

STILL HAVE A QUESTION?

Ask the people who trade it every day.

Our trade managers answer technical and commercial questions about grades, specifications, packing and shipping.

LET’S TALK ABOUT YOUR REQUIREMENTS

Your next shipment starts here.

Request a quote